Open Access
| Issue |
E3S Web Conf.
Volume 313, 2021
19th International Stirling Engine Conference (ISEC 2021)
|
|
|---|---|---|
| Article Number | 03002 | |
| Number of page(s) | 14 | |
| Section | Heat Transfer / Fluid Flow Analysis | |
| DOI | https://doi.org/10.1051/e3sconf/202131303002 | |
| Published online | 22 October 2021 | |
- J. Banks, “Deep-Dive Analysis of the Best Geothermal Reservoirs for Commercial Development in Alberta : Final Report, ” University of Alberta, Edmonton (2017) [Google Scholar]
- “Community Integrated Energy Mapping Feasability Study in Alberta’s Industrial Heartland and Strathcona Industrial Area” (2014). Available: http://cmcghg.com/wp-content/uploads/2015/03/EEBE-062-Report-Short-EN.pdf [Google Scholar]
- I. Kolin, Stirling Motor: History Theory Practice (Zagreb University Publications, Ltd., Dubrovnik, 1991). [Google Scholar]
- J. Senft, Mechanical Efficiency of Heat Engines (Cambridge University Press, Cambridge, 2007) [CrossRef] [Google Scholar]
- W. Martini, Stirling Engine Design Manual, 2nd ed. (1983) [Google Scholar]
- D. Gedeon, “Sage: Object Oriented Software for Stirling Machine Design, ” Proceedings of the Intersociety Energy Conversion Engineering Conf., USA, pp. 1902-1907 (1994) [Google Scholar]
- R. Demko and L. Penswick, “Sage Simulation Model for Technology Demonstration Convertor by a Step-by-Step Approach, ” 3rd Int. Energy Conversion Engineering Conference (2005) [Google Scholar]
- B. Hoegel, D. Pons, M. Gschwendtner, A. Tucker and M. Sellier, “Thermodynamic peculiarities of alpha-type Stirling engines for low-temperature difference power generation: Optimisation of operating parameters and heat exchangers using a thirdorder model, ” Proceedings of the Institution of Mechanical Engineering, Part C: Journal of Mech. Engineering Science, 228, no. 11, pp. 1935-1947 (2014) [Google Scholar]
- “Canadian Climate Normals 1981-2010 Station Data, ” (Government of Canada, December 10, 2020) [Online]. Available: https://climate.weather.gc.ca/climate_normals/results_1981_2010_e.html?searchType=stnProv&lstProvince=AB&txtCentralLatMin=0&txtCentralLatSec=0&txtCentralLongMin=0&txtCentralLongSec=0&stnID=1865&dispBack=0 [Google Scholar]
- C. Stumpf, “Parameter Optimization of a Low Temperature Difference Gamma-Type Stirling Engine to Maximize Shaft Power, ” Thesis (2019) [Google Scholar]
- J. Senft, “Optimum Stirling engine geometry, ” Int. J. of Energy Research, 26, no. 12, pp. 1087-1101 (2002) [CrossRef] [Google Scholar]
- J. Egas, “Stirling Engine Configuration Selection, ” Energies, 11, no. 584, pp. 1-23 (2018) [CrossRef] [Google Scholar]
- R. Gheith, F. Aloui and S. Nasrallah, “Determination of adequate regenerator for a Gamma-type Stirling engine, ” Applied Energy, vol. 139, pp. 272-280, February 1, 2015. [CrossRef] [Google Scholar]
- “Steel Wool Grades, ” Engineering Toolbox (2010) [Online]. Available: https://www.engineeringtoolbox.com/steel-wool-grades-d_1619.html [Google Scholar]
- I. Urieli and D. Berchowitz, Stirling Cycle Engine Analysis (Adam Hilger Ltd, Bristol, 1984) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.