Open Access
| Issue |
E3S Web Conf.
Volume 321, 2021
XIII International Conference on Computational Heat, Mass and Momentum Transfer (ICCHMT 2021)
|
|
|---|---|---|
| Article Number | 03010 | |
| Number of page(s) | 8 | |
| Section | Modeling and Simulation | |
| DOI | https://doi.org/10.1051/e3sconf/202132103010 | |
| Published online | 11 November 2021 | |
- J. Ohta, T. Fuji, K. Akagawa and N. Takenaka, “Performance and flow characteristics of nozzles for initially subcooled hot water (influence of turbulence and decompression rate),” International Journal of Multiphasse Flow, vol. 19, no. 1, pp. 125-136, 1993. [CrossRef] [Google Scholar]
- K. E. Ringstad, Y. Allouche, P. Gullo, A. Ervik, K. Banasiak and A. Hafner, “A detailed review on CO2 two-phase ejector flow modeling,” Thermal Science and Engineering Progress, vol. 20, 2020. [Google Scholar]
- A. N. Wu B.J.C., “A study of Nonequilibrium Flashing of Water in a Converging-Diverging Nozzle: Volume2. Modelling. U.S. Nuclear Regulatory Comission,” 1981. [Google Scholar]
- L. Yixiang and D. Lucas, “A review on numerical modelling of flashing flow with application to nuclear safety analysis,” Applied Thermal Engineering, vol. 182, 2021. [Google Scholar]
- W. Angielczyk, Y. B. D. Brtosiewicz and J.-M. Seynhaeve, “1-D Modeling of Supersonic Carbon Dioxide Two-Phase Flow Through Ejector Motive Nozzle,” in Internation Refrigeration and Air Conditioning Conference, Purdue, 2010. [Google Scholar]
- M. Haida, J. Smolka, A. Hafner, M. Palacz, K. Banasiak and A. J. Nowak, “Modified homogeneous relaxation model for the R744 trans-critical flow in a two-phase ejector,” International Journal of Refrigeration, pp. 314- 333, 2017 [Google Scholar]
- Ansys, Ansys V20 Users Guide, 2020. [Google Scholar]
- L. Yixiang and L. Dirk, “3D CFD simulation of flashing flows in a converging-diverging nozzle,” Nuclear Engineering Design, pp. 149-163, 2015. [Google Scholar]
- G. Palau-Salvador, P. Gonzalez-Altozano and J. Arviza-Valverde, “Numerical modeling of cavitating flows for simple geometries,” Spanish Journal of Agricultural Research, 2007. [Google Scholar]
- I. Karathanassis, “Comparative evaluation of phase change mechanisms for prediction of flashing flows,” International Journal of Multiphase Flows, vol. 97, pp. 257-270, 2017. [CrossRef] [Google Scholar]
- Q. D. Le, Flashing Flow Model for Industrial Energy Applications, POLITECNICO DI MILANO, 2017. [Google Scholar]
- M. Yazdani, T. D. Radcliff, A. A. Alahyari and M. Farzad, “Numerical Modeling and Validation so Supersonic Two-Phase Flow of CO2 in Converging-Diverging Nozzles,” Journal of Fluid Engineering, vol. 136, 2014. [CrossRef] [Google Scholar]
- P. Downar-Zapolski and Z. Bilicki, “The nonequilibrium relaxation model for one-dimensional flashing liquid flow,” International Journal of Multiphase Flow, vol. 22, pp. 473-483, 1996. [CrossRef] [Google Scholar]
- M. D. Lorenzo, P. Lafon, M. D. Matteo, M. Pelanti, J.-M. Seynhaeve and Y. Bartosiewicz, “Homogeneous two-phase flow models and accurate steam-water table look-up method for fast transient simulations,” International Journal of Multiphase Flow, pp. 199-219, 2017. [Google Scholar]
- M. Palacz, M. Haida, J. Smolka, A. J. Nowak, K. Banasiak and A. Hafner, “ HRM accuracy comparison for the simulation of CO2 expansion in two-phase ejectors for supermarket refrigeration systems,” Applied Thermal Engineering, no. 115, pp. 160-169, 2017. [CrossRef] [Google Scholar]
- F. Bussac, “Developpement d’une turbine diphasique pour la production d’electricite a partir de la detente de saumures geomethermales,” Commission des Communautes europeennes, 1985. [Google Scholar]
- F. Giacomelli, F. Mazzelli and A. Milazzo, “A novel CFD approach for the computation of R744 flashing nozzles in compressible and metastable conditions,” Energy, vol. 162, pp. 1092-1105, 2018. [CrossRef] [Google Scholar]
- L. Geng, H. Liu and X. Wei, “CFD analysis of the flashing flow characteristics of subcritical refrigerant R134a through converging-diverging nozzles,” International Journal of Thermal Sciences, pp. 438-445, 2019. [CrossRef] [Google Scholar]
- J. Ohta, “Performance and flow characteristics of nozzles for initially subcooled hot water (influence of turbulence and decompression rate),” International Journal of Multiphasse Flow, vol. 19, no. 1, pp. 125-136, 1993. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.