Open Access
E3S Web Conf.
Volume 347, 2022
2nd International Conference on Civil and Environmental Engineering (ICCEE 2022)
Article Number 01001
Number of page(s) 8
Section Infrastructure and Building Construction
Published online 14 April 2022
  1. K. Zilch and R. Reinecke, Capacity of shear joints between high-strength precast elements and normal-strength cast-in-place decks, in PCI/FHWA/FIB International Symposium on High Performance Concrete Precast/Prestressed Concrete, (2000). [Google Scholar]
  2. E. N. B. S. Júlio, F. A. B. Branco, and V. D. Silva, Concrete-to-concrete bond strength. Influence of the roughness of the substrate surface, Constr. Build. Mater., 18, no. 9, pp. 675–681, (2004), doi: 10.1016/j.conbuildmat.2004.04.023. [Google Scholar]
  3. P. M. D. Santos, E. N. B. S. Júlio, and V. D. Silva, Correlation between concrete-toconcrete bond strength and the roughness of the substrate surface, Constr. Build. Mater., 21, no. 8, pp. 1688–1695, (2007), doi: 10.1016/j.conbuildmat.2006.05.044. [CrossRef] [Google Scholar]
  4. F. Perez, M. Morency, B. Bissonnette, and L. Courard, Correlation between the roughness of the substrate surface and the debonding risk, Concr. Repair, Rehabil. Retrofit. II - Proc. 2nd Int. Conf. Concr. Repair, Rehabil. Retrofit. ICCRRR, no. January, pp. 347–348, (2009), doi: 10.1201/9781439828403.ch133. [Google Scholar]
  5. P. M. D. Santos and E. N. B. S. Júlio, Comparison of methods for texture assessment of concrete surfaces, ACI Mater. J., 107, no. 5, pp. 433–440, (2010), doi: 10.14359/51663962. [Google Scholar]
  6. Eurocode 2. EN 1992–1-1., Design of concrete structures - Part 1-1: General rules and rules for buildings (English). (2004). [Google Scholar]
  7. International Federation for Structural Concrete, Model Code, 11, no. 1. Comité Euro-International du Béton, Secretariat Permanent, Case Postale 88, CH-1015 Lausanne, Switzerland, (2010). [Google Scholar]
  8. ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary, American Concrete Institute, Farmington Hills, MI, (2019). [Google Scholar]
  9. T. P. Tassios and E. N. Vintzeleou, Concrete-to-concrete friction, 113, no. 4, pp. 832–849, (1987). [Google Scholar]
  10. D. Figueira, C. Sousa, R. Calçada, and A. S. Neves, Push-Off Tests in the Study of Cyclic Behavior of Interfaces between Concretes Cast at Different Times, J. Struct. Eng., 142, no. 1, p. 04015101, (2016), doi: 10.1061/(asce)st.1943-541x.0001364. [CrossRef] [Google Scholar]
  11. L. Fronteddu, P. Léger, and R. Tinawi, Static and Dynamic Behavior of Concrete Lift Joint Interfaces, J. Struct. Eng., 124, no. 12, pp. 1418–1430, (1998), doi: 10.1061/(asce)0733-9445(1998)124:12(1418). [CrossRef] [Google Scholar]
  12. J. Xia, K. Shan, X. Wu, R. Gan, and W. Jin, Shear-friction behaviour of concrete-toconcrete interface under direct shear load, Eng. Struct., 238, (2021), doi: 10.1016/j.engstruct.2021.112211. [Google Scholar]
  13. Astm I. ASTM C39/C39M-18 standard test method for compressive strength of cylindrical concrete specimens. PA: West Conshohocken; 2018. [Google Scholar]
  14. Astm I. ASTM C496/C496M-17 standard test method for splitting tensile strength of cylindrical concrete specimens. PA: West Conshohocken; 2017. [Google Scholar]
  15. M. Leblouba, S. Barakat, M. S. A. Ahmed, and S. Al-Toubat, Shear strength at the interface of precast bridge concrete decks and girders subjected to cyclic loading with varying speeds, Eng. Struct., 196, no. June, p. 109296, (2019), doi: 10.1016/j.engstruct.2019.109296. [CrossRef] [Google Scholar]
  16. H. Atapour and M. Moosavi, The influence of shearing velocity on shear behavior of artificial joints, Rock Mech. Rock Eng., 47, no. 5, pp. 1745–1761, (2014), doi: 10.1007/s00603-013-0481-9. [CrossRef] [Google Scholar]
  17. Z. C. Tang and L. N. Y. Wong, Influences of normal loading rate and shear velocity on the shear behavior of artificial rock joints, Rock Mech. Rock Eng., 49, no. 6, pp. 2165–2172, (2016), doi: 10.1007/s00603-015-0822-y. [CrossRef] [Google Scholar]
  18. Y. Chae, J. Lee, M. Park, and C.-Y. Kim, Fast and Slow Cyclic Tests for Reinforced Concrete Columns with an Improved Axial Force Control, J. Struct. Eng., 145, no. 6, p. 04019044, (2019), doi: 10.1061/(asce)st.1943-541x.0002334. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.