Open Access
Issue
E3S Web of Conf.
Volume 365, 2023
IV International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2022)
Article Number 04021
Number of page(s) 7
Section Mechanization, Electrification of Agriculture and Renewable Energy Sources
DOI https://doi.org/10.1051/e3sconf/202336504021
Published online 30 January 2023
  1. Mamatov F., Eshdavlatov E., Suyunov A. The Shape of the Mixing Chamber of the Continuous Mixer. J Adv Research in Dynamical & Control Systems 12, 2016–2023 (2020) [CrossRef] [Google Scholar]
  2. Mamato F. M., Eshdavlatov E., Suyuno A. Continuous Feed Mixer Performance, Journal of Advanced Research in Dynamical and Control Systems 12, 2195–2200 (2020) [CrossRef] [Google Scholar]
  3. Maiviatov F., Karshiev F., Gapparov Sh. Movement of crushed stem particles when they interact with hammers. AEGIS 2021. IOP Conf. Series: Earth and Environmental Science 868(2021) doi:10.1088/1755-1315/868/1/012060 [Google Scholar]
  4. Maiviatov F., Ravshanov K., Mamatov S., Temirov I., Kuvvatov D., Abdullayev A. Combined machine for preparing the soil for re-sowing crops// AEGIS 2021. IOP Conf. Series: Earth and Environmental Science 868(2021) doi:10.1088/1755-1315/868/1/012066. [Google Scholar]
  5. Ravshanov K, Fayzullaev K, Ismoilov I, Irgashev D, Mamatov S and Mardonov Sh. The machine for the preparation of the soil in sowing of plow crops under film. In IOP Conf. Series: Materials Science and Engineering 883(2020) doi:10.1088/1757-899X/883/1/012138 [Google Scholar]
  6. Chuyanov, D., Shodmonov, G.,Avazov, I., Rashidov, N, Ochilov, S. Soil preparation machine parameters for the cultivation of cucurbitaceous crops. In IOP Conf. Series: Materials Science and Engineering 883(2020) doi:10.1088/1757-899X/883/1/012122. [Google Scholar]
  7. Fayzullayev Kh., Mamatov S., RadjabovM., Sharipov Sh., Tavashov R., andNurmanovaM. The quality of loosening the soil with subsoilers of the combined machine. In IOP Conf. Series: Materials Science and Engineering 1030, 012171.IOP Publishing. doi:10.1088/1757-899X/1030/1/012171 [Google Scholar]
  8. Temirov I., Ravshanov Kh., Fayzullaev Kh., Ubaydullaev Sh., and Kodirov U. Development of a machine for preparing the soil for sowing melons under the film. IOP Conf. Series: Materials Science and Engineering 1030 012169. IOP Publishing. doi:10.1088/1757-899X/1030/1/012169 [Google Scholar]
  9. Kodirov U., Aldoshin N., Ubaydullayev Sh., Sharipov E., Muqimov Z and Tulaganov B. The soil preparation machine for seeding potatoes on comb. In IOP Conf. Series: Materials science and engineering 883, (2020) doi:10.1088/1757-899X/883/1/012143 [Google Scholar]
  10. Aldoshin N., Kurbanov Sh, Abdullaev A., Khujayev A., Choriyeva D. Parameters of the angle-lift of the front plow for smooth, rowless plowing. In E3S web of conferences 264, (2021) doi. org/10.1051/e3sconf/202126404042 [CrossRef] [EDP Sciences] [Google Scholar]
  11. Ravshanov H., Babajanov L., Kuziev Sh., Rashidov N., Kurbanov Sh. Plough hitch parameters for smooth tails. In IOP Conf. series: materials science and engineering 883, 012139 Iop publishing doi:10.1088/1757-899X/883/1/012139 [Google Scholar]
  12. Devsh K., Ashok T. Performance evaluation of tractor drawn potato digger cum-elevator. International Journal of Agricultural Science and Research, 7(2), pp. 433–448, (2017) [Google Scholar]
  13. Farhadi R., Sakenian N., Azizi P. Design and construction of rotary potato grader, Bulgarian Journal of Agricultural Science, 2, pp. 304 – 314, Bulgaria (2012) [Google Scholar]
  14. Hevko R.B., Tkachenko I.G., Synii S.V., Development of design and investigation of operation processes of small-scale root crop and potato harvesters, INMATEH – Agricultural Engineering. 49 (2), pp. 53–60, Romania (2016) [Google Scholar]
  15. Koga N., Kajiyama T., Senda K., Iketani S, Tamiya S, Tsuda, S., Energy efficiency of potato production practices for bioethanol feedstock in northern Japan, European Journal of Agronomy, 44(1), pp. 1–8, Netherlands (2013) [CrossRef] [Google Scholar]
  16. Sun D.X., Zhang A.M., Gong J.X. Design and experiment on 1SZL-250A type subsoiling rotary tillage fertilizer combined soil working machine, Journal of Chinese Agricultural Mechanization, 37(4) pp. 1–6. China (2016) [Google Scholar]
  17. Tauseef A. M., Ghafoor A., Munir A., Iqbal M., Ahmad M. Design modification and field testing of groundnut digger, Asian Journal of Science and Technology 5, pp. 389–394, India (2014) [Google Scholar]
  18. Koga N., Kajiyama T., Senda K., Iketani S, Tamiya S, Tsuda, S., Energy efficiency of potato production practices for bioethanol feedstock in northern Japan, European Journal of Agronomy, 44(1), pp. 1–8, Netherlands (2013) [CrossRef] [Google Scholar]
  19. Lü J.Q., Shang Q.Q., Yang Y., Li Z.H., Li J.C., Liu Z.Y. Design optimization and experiment on potato haulm cutter, Transactions of the CSAM, Issue number 47(5), pp.106–114, London (2016) [Google Scholar]
  20. Lobachevsky YA.P., Emelyanov P.A., Aksenov A.G., Sibirev A.V., Onion production machine technology, Monograph, FSBSI “Federal Scientific Agronomic and Engineering Centre VIM”. p. 168, Russia (2016) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.