Open Access
| Issue |
E3S Web of Conf.
Volume 465, 2023
8th International Conference on Industrial, Mechanical, Electrical and Chemical Engineering (ICIMECE 2023)
|
|
|---|---|---|
| Article Number | 02032 | |
| Number of page(s) | 6 | |
| Section | Symposium on Electrical, Information Technology, and Industrial Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202346502032 | |
| Published online | 18 December 2023 | |
- S. Hamza Hamad, “The Influence of Parametric Design Tools on Increasing Creativity in the Furniture Design Process,” Eurasian Journal of Science & Engineering, vol. 6, no. 1, pp. 199–211, (2020) [Google Scholar]
- S. Ö. Felek, “Parametric modelling in furniture design a case study: two door wardrope,” The European Journal of Research and Development, vol. 2, no. 2, pp. 62–74, (2022) [CrossRef] [Google Scholar]
- Y. Zheng and J. Zhu, “The application of bamboo weaving in modern furniture,” Bioresources, vol. 16, no. 3, p. 5024, (2021) [CrossRef] [Google Scholar]
- L. A. N. Wibawa, “Prediksi umur fatik struktur crane kapasitas 10 ton menggunakan metode elemen hingga,” Media Mesin: Majalah Teknik Mesin, vol. 21, no. 1, pp. 18–24, (2019) [CrossRef] [Google Scholar]
- X. Xu, X. Xiong, X. Yue, and M. Zhang, “A Parametric Optimized Method for Three-Dimensional Corner Joints in Wooden Furniture,” Forests, vol. 14, no. 5, p. 1063, (2023) [CrossRef] [Google Scholar]
- T. Mahalingam and D. P. Chandima, “Gap calculation method to minimize inductance drop during reflow on helical wound planar power inductors,” in 2016 Manufacturing & Industrial Engineering Symposium (MIES), IEEE, (2016), pp. 1–6. [Google Scholar]
- A. Kharola, G. Bansal, D. Devli, P. Pandey, R. Kuriyal, and S. Avikal, “Design And Simulation Of Foldable Furniture In Ansys,” Elementary Education Online, vol. 20, no. 4, p. 4394, (2022) [Google Scholar]
- R. D. Cook and B. Suryoatmono, Konsep dan aplikasi metode elemen hingga. ERESCO, (1990) [Google Scholar]
- T. Stolarski, Y. Nakasone, and S. Yoshimoto, Engineering analysis with ANSYS software. Butterworth-Heinemann, (2018) [Google Scholar]
- R. Ariyansah and A. Gamayel, “Analisis Kekuatan Struktur Rangka Pembangkit Listrik Sepeda Statis Menggunakan Perangkat Lunak ANSYS Workbench,” Teknobiz: Jurnal Ilmiah Program Studi Magister Teknik Mesin, vol. 11, no. 1, pp. 20–25, (2021) [Google Scholar]
- B. C. Tjiptady, M. Rohman, D. A. Sudjimat, and D. Ratnawati, “Analisis tegangan, deformasi, dan retak pada gas turbine blade dengan metode elemen hingga,” Jurnal Taman Vokasi, vol. 8, no. 2, pp. 47– 54, (2020) [Google Scholar]
- F. Lubis, R. Pane, S. Lubis, M. A. Siregar, and B. S. Kusuma, “Analisa Kekuatan Bearing Pada Prototype Belt Conveyor,” Jurnal MESIL (Mesin Elektro Sipil)/Journal MESIL (Machine Electro Civil), vol. 2, no. 2, pp. 51–57, (2021) [CrossRef] [Google Scholar]
- H. Xie, J. Wang, and M. Zhang, “Soft and Hard Constrained Parametric Generative Schemes for Encoding and Synthesizing Airfoils,” arXiv preprint arXiv:2205.02458, (2022) [Google Scholar]
- A. Asroni, “Stress Analysis Pada Stand Shock Absorbers Sepeda Motor Dengan Menggunakan Software Inventor 2015,” Turbo: Jurnal Program Studi Teknik Mesin, vol. 4, no. 1, (2015) [CrossRef] [Google Scholar]
- A. Saifullah, “Analisis pembebanan vertikal pada frame sepeda menggunakan metode elemen hingga dengan bantuan ansys,” in Prosiding SENTRA (Seminar Teknologi dan Rekayasa), 2021, pp. 145– 150. [Google Scholar]
- R. Esen and B. Uysal, “The analysis of living room furniture and room spaces used by families relation of West Black Sea Region in Turkey,” Engineering Science and Technology, an International Journal, vol. 22, no. 2, pp. 692–696, (2019) [CrossRef] [Google Scholar]
- S. Sunardi, “Optimalisasi Desain Frame Sepeda Menggunakan Software Autodesk Inventor 2015,” Semesta Teknika, vol. 20, no. 2, pp. 187–192, (2017) [Google Scholar]
- A. H. P. Ningtyas, H. Hidayat, and P. N. Rofiyanto, “Analisis desain frame sepeda listrik roda tiga sebagai alat bantu transportasi bagi penyandang disabilitas menggunakan software Autodesk Inventor,” Jurnal Teknik Mesin Indonesia, vol. 16, no. 2, pp. 7–11, (2021) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.