Open Access
E3S Web Conf.
Volume 391, 2023
4th International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2023)
Article Number 01096
Number of page(s) 14
Published online 05 June 2023
  1. K.C. Chiu, C.H. Lin, S.F. Yeh, Y.H. Lin, C.S. Huang, and K.C. Chen, Cycle life analysis of series connected lithium-ion batteries with temperature difference. J.P. Sour. 263, 75-84, (2014) [CrossRef] [Google Scholar]
  2. X. Feng, M. Fang, X. He, M. Ouyang, L. Lu, H. Wang, and M. Zhang, Thermal runaway features of large format prismatic lithium-ion battery using extended volume accelerating rate calorimetry. J.P. Sour. 255, 294-301, (2014) [CrossRef] [Google Scholar]
  3. S. Arora, Design of a modular battery pack for electric vehicles (Doctoral dissertation, Ph. D. Thesis, Swinburne University of Technology, Melbourne, Australia). (2017) [Google Scholar]
  4. A.A. Pesaran, Battery thermal management in EV and HEVs: issues and solutions. Battery Man, 43, 34-49, (2001) [Google Scholar]
  5. J. Bohacek, M. Raudensky, and E. Karimi-Sibaki, Polymeric hollow fibers: Uniform temperature of Li-ion cells in battery modules. Appl. Therm. Eng. 159, 113940, (2019) [CrossRef] [Google Scholar]
  6. R. Jilte, and R. Kumar, Numerical investigation on cooling performance of Li-ion battery thermal management system at high galvanostatic discharge. Int. J. Engi. Sci.Tech, 21, 957-969. (2018) [Google Scholar]
  7. M. Li, Y. Liu, X. Wang, and J. Zhang, Modelling and optimization of an enhanced battery thermal management system in electric vehicles. Frontiers of Mechanical Engineering. 14, 65-75, (2019) [CrossRef] [Google Scholar]
  8. M.Y. Ramandi, I. Dincer, and G.F. Naterer, Heat transfer and thermal management of electric vehicle batteries with phase change materials. H. Mass. Trans, 47, 777-788, (2011) [Google Scholar]
  9. J. Zhao, Z. Rao, Y. Huo, X. Liu, and Y. Li, Thermal management of cylindrical power battery module for extending the life of new energy electric vehicles. Appl. Therm. Eng, 85, 33-43, (2015) [CrossRef] [Google Scholar]
  10. T. Wang, K.J. Tseng, J. Zhao, and Z. Wei, Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies. Appl. Ener, 134, 229-238, (2014) [CrossRef] [Google Scholar]
  11. H. Park, A design of air flow configuration for cooling lithium-ion battery in hybrid electric vehicles. J.P. Sour. 239, 30-36, (2013) [CrossRef] [Google Scholar]
  12. K. Yu, Yang, Y. Cheng, and C. Li, Thermal analysis and two-directional air flow thermal management for lithium-ion battery pack. J.P. Sour, 270, 193-200, (2014) [CrossRef] [Google Scholar]
  13. J. Xun, R. Liu, and K. Jiao, Numerical and analytical modelling of lithium-ion battery thermal behaviours with different cooling designs. J.P. Sour, 233, 47-61, (2013) [CrossRef] [Google Scholar]
  14. Y.S. Choi, and D.M. Kang, Prediction of thermal behaviours of an air-cooled lithium- ion battery system for hybrid electric vehicles. J.P. Sour, 270, 273-280, (2014) [CrossRef] [Google Scholar]
  15. X.M. Xu, and R. He, Research on the heat dissipation performance of battery pack based on forced air cooling. J.P. Sour, 240, 33-41 (2013) [CrossRef] [Google Scholar]
  16. A. Jarrett, and I.Y. Kim, Design optimization of electric vehicle battery cooling plates for thermal performance. J.P. Sour, 196, 10359-10368, (2011) [CrossRef] [Google Scholar]
  17. R. Zhao, J. Gu, and J. Liu, An experimental study of heat pipe thermal management system with wet cooling method for lithium-ion batteries. J.P. Sour, 273, 1089-1097, (2015) [CrossRef] [Google Scholar]
  18. S.A. Khateeb, S. Amir Uddin, M. Farid, J.R. Selman, and S. Al-Hallaj, Thermal management of Li-ion battery with phase change material for electric scooters: experimental validation. J.P. Sour, 142, 345-353, (2005) [CrossRef] [Google Scholar]
  19. S.A. Khateeb, M. Farid, J.R. Selman, and S. Al-Hallaj, Design and simulation of a lithium-ion battery with a phase change material thermal management system for an electric scooter. J.P. Sour, 128, 292-307, (2004) [CrossRef] [Google Scholar]
  20. N. Mei, X. Xu, and R. Li, Heat Dissipation Analysis on the Liquid Cooling System Coupled with a Flat Heat Pipe of a Lithium-Ion Battery. ACS omega, 5, 17431-17441, (2020) [CrossRef] [PubMed] [Google Scholar]
  21. N. Rajesh, R. Reuven, L.G. Asirvatham, and S. Wong wises, Thermal Management of Electronic Devices Using Gold and Carbon Nanofluids in a Lid-Driven Square Cavity Under the Effect of Variety of Magnetic Fields. IEEE, 10, 1868-1878, (2020) [Google Scholar]
  22. N. Rajesh, D.P. Matta, R. Reuven, L.G. Asirvatham, S. Wongwises, A. Yerramilli, and S. Adusumilli, Effect of Magnetic Field on the Laminar Heat Transfer Performance of Hybrid Nanofluid in a Lid Driven Cavity Over Solid Block. A.S.M.E, 83747, V001T11A004, (2020) [Google Scholar]
  23. N. Rajesh. and K. Venkatasubbaiah, Multiphase approach on heat transfer performance of micro-channel using hybrid carbon nanofluid. A.S.M.E. (2015) [Google Scholar]
  24. G.S. Rao, G.K. Rao, and S.S.N. Raju, An innovative approach to battery management and propulsion system of electric/hybrid electric vehicle. Inter. J. Electric. Hybrid Vehicle, 6, 1-13, (2014) [CrossRef] [Google Scholar]
  25. H. Panjagala, E.R. Madhukar, and I.R. Kiran, Recent advancements in shape optimization of aero spiked high-speed re-entry vehicle using CFD. EDP Sciences, 172, 01007, (2018) [Google Scholar]
  26. S. Sudhakar Babu, S. Yasin, Heat transfer analysis of automobile radiator with helical tubes using CFD. Intern. J. Innov. Techn. Engineer, 8, 999-1003, (2019) [Google Scholar]
  27. M. Murugan, A. Saravanan, P. Elumalai, G. Murali, N. Dhineshbabu, P. Kumar, & A. Afzal, Thermal management system of lithium-ion battery packs for electric vehicles: An insight based on bibliometric study. Jour. Ener. Storage, 52, 104723, (2022) [CrossRef] [Google Scholar]
  28. G. Murali, G.S.N. Sravya, J. Jaya, & V.N. Vamsi, A review on hybrid thermal management of battery packs and it's cooling performance by enhanced PCM. Renew. Sustainable. Energy. Reviews, 150, 111513, (2021) [CrossRef] [Google Scholar]
  29. A. Srilatha, A. Pandian, P. Srinivasa Varma, Multilevel charging of lithium-ion battery for fast charging stations of EV’s. Inter. J. Advance. Science. Tech, 29, 858-871, (2020) [Google Scholar]
  30. G. Murali, B. Nagendra, and J. Jaya, CFD analysis on heat transfer and pressure drop characteristics of turbulent flow in a tube fitted with trapezoidal-cut twisted tape insert using Fe3O4 nano fluid. Materi. Today. Proceeding, 21, 313-319, (2019) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.