EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 401 (2023) E3S Web of Conf., 401 (2023) 05005 References
Open Access
Issue
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
Article Number 05005
Number of page(s) 8
Section Engineering Materials Science, Intelligent Transport Systems and Transport Logistics
DOI https://doi.org/10.1051/e3sconf/202340105005
Published online 11 July 2023
  1. Krawiec, P., Warguła, Ł., Waluś, K.J., Gawrońska, E., Ságová, Z., Matijošius, J. Efficiency and Slippage in Draw Gears with Flat Belts, Energies, 15 (23). (2022) [Google Scholar]
  2. Plekhanov A.F., Mamatova D.A., Djuraev A., Sarttarova L.T., Dikenova D.B. Justification parameters of belt transmission with a composition tensional roller with elastic elements. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstilnoi Promyshlennosti, 389 (5), pp. 196 – 203. (2020) [Google Scholar]
  3. Stehlikova B., Molnar V., Fedorko G., Michalik P., Paulikova A. Research about influence of the tension forces, asymmetrical tensioning and filling rate of pipe conveyor belt filled with the material on the contact forces of idler rolls in hexagonal idler housing. Journal of the International Measurement Confederation. (2020) [Google Scholar]
  4. Hamasaki Y.Energy saving technology of flat belts: Meandering control of belts. Toraibarojisuto Journal of Japanese Society of Tribologists, 63(8), pp.532 - 538. (2018). [Google Scholar]
  5. Choudhury P., Kumar R., Singh S. Power Loss Optimization in a Flat Belt Drive. Advances in Manufacturing Technology: Computational Materials Processing and Characterization, pp. 121 - 133, (2022). [Google Scholar]
  6. Turakulov M., Tursunov N., Alimukhamedov S. Development of technology for manufacturing molding and core mixtures for obtaining synthetic cast iron. In E3S Web of Conferences, 365, p. 05006, (2023). [CrossRef] [EDP Sciences] [Google Scholar]
  7. Radkevich M., Pulatova T., Shipilova K., Pochuzhevsky O., Gapirov A., Turakulov M. Possibilities of using lianas for greening automobile roads. In E3S Web of Conferences, 264, p. 01034 (2021). [CrossRef] [EDP Sciences] [Google Scholar]
  8. Gramblička S., Kohár R., Stopka M. Dynamic Analysis of Mechanical Conveyor Drive System. Procedia Engineering, 192, pp. 259 – 264. (2017). [CrossRef] [Google Scholar]
  9. Zhang W., Wang C., Zhang F. The performance analysis and research about a type of new tubular belt Key Engineering Materials, 561, pp. 255 – 259. (2013). [Google Scholar]
  10. Sun C., Ren A., Sun G., Liu Y. The calculation of the classical V-belt life with different reliability. Procedia Engineering, 15, pp. 5290 – 5293. (2011). [CrossRef] [Google Scholar]
  11. Yunusov S., Sultonov A., Rakhmatov M., Bobomurotov T., Agzamov M. Results of studies on extending the time operation of gin and linter grates. E3S Web of Conferences, 304, p. 03028, (2021). [CrossRef] [EDP Sciences] [Google Scholar]
  12. Pozhbelko V.I. Limiting traction of flat, round, and V-belt transmissions. Russian Engineering Research, 35 (6), pp. 403-406. (2015) [CrossRef] [Google Scholar]
  13. Dzhuraev A., Yunusov S., Mirzaumidov A., Umarov K., Matkarimov A. Development of an effective design and calculation for the bending of a gin saw cylinder. International Journal of Advanced Science and Tech., 29 (4), pp. 1371 – 1390. (2020). [Google Scholar]
  14. Prasad D., Cassenti B.N. Development and validation of a model for flat belt tracking in pulley drive systems. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, 134 (1). (2012). [Google Scholar]
  15. Wasfy T.M., Yildiz C., Wasfy H.M., Peters J.M. Effect of Flat Belt Thickness on Steady-State Belt Stresses and Slip. Journal of Computational and Nonlinear Dynamics, 11 (5). (2016) [Google Scholar]
  16. Mikhail Belov. The calculation of the belt transmission. Universum: technical sciences: electron. scientific journal. 2017. № 5 (38). [Google Scholar]
  17. Yunusov, S. Z., Kenzhaboev, Sh. Sh., & Makhmudova, Sh. A. (2022). Influence of changing the parameters of the elastic element of the composite shaft support on the resulting stresses in the system. Universum: тeхничeскиe нaуки, (10-1 (103)), 55-60. [Google Scholar]
  18. Shermukhamedov, A. and Ergashev, N. and Azizov, A. Substantiating parameters brake system of the tractor trailer. In E3S Web of Conferences, Vol. 264. (2021). [Google Scholar]
  19. Krawiec P. Analysis of selected dynamic features of a two-wheeled transmission system. Journal of Theoretical and Applied Mechanics (Poland), 55 (2), pp. 461 - 467. (2017). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.