Open Access
Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 05084 | |
Number of page(s) | 9 | |
Section | Engineering Materials Science, Intelligent Transport Systems and Transport Logistics | |
DOI | https://doi.org/10.1051/e3sconf/202340105084 | |
Published online | 11 July 2023 |
- Campbell M E 1998 Campbell, M. E. (1998). Technology Utilization -SOLID LUBRICANTS. NASA Technical Memorandum, (01). NASA Technical Memorandum 5059 [Google Scholar]
- Kasneci G, Elbassuoni S and Weikum G 2009 Solid Lubricants and Coatings for Extreme Environments: State-of-the-Art Survey Proceeding of the 18th ACM conference on Information and knowledge management -CIKM ‘09 (New York, New York, USA: ACM Press) p 1653. DOI: 10.1145/1645953.1646196 [Google Scholar]
- Gresham R M 2018 ASM HANDBOOK Volume 18: Friction, Lubrication, and Wear Technology Tribology & Lubrication Technology 74 84 [Google Scholar]
- Novoselov K S, Mishchenko A, Carvalho A and Castro Neto A H 2016 2D materials and van der Waals heterostructures Science353 aac9439. DOI: 10.1126/science.aac9439 [Google Scholar]
- Somvanshi D and Jit S 2020 5 -Transition metal dichalcogenides based two-dimensional heterostructures for optoelectronic applications Micro and Nano Technologies ed S Jit and S B T-2D N H M Das (Elsevier) pp 125–49. DOI: https://doi.org/10.1016/B978-0-12-817678-8.00005-1 [Google Scholar]
- Hilton M R and Fleischauer P D 1992 Applications of solid lubricant films in spacecraft Surface and Coatings Technology 54–55 435–41. DOI: https://doi.org/10.1016/S0257-8972(07)80062-4 [Google Scholar]
- Bowden F P and Tabor D 1951 The Friction and Lubrication of Solids American Journal of Physics 19 428–9. DOI: 10.1119/1.1933017 [Google Scholar]
- Spalvins T 1987 A review of recent advances in solid film lubrication Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 5 212–9. DOI: 10.1116/1.574106 [CrossRef] [Google Scholar]
- Bowden F P, Bowden F P and Tabor D 2001 The friction and lubrication of solids vol 1 (Oxford university press) [Google Scholar]
- Magnéli A 1953 Structures of the ReO3-type with recurrent dislocations of atoms: `homologous series’ of molybdenum and tungsten oxides Acta Crystallographica 6 495–500. DOI: https://doi.org/10.1107/S0365110X53001381 [CrossRef] [Google Scholar]
- Vazirisereshk M R, Martini A, Strubbe D A and Baykara M Z 2019 Solid lubrication with MoS2: A review Lubricants 7 57 [Google Scholar]
- Righton Blackburns Limited Data Sheet: Cronidur 30 -AMS 5898 -1.4108 | Righton Blackburns Limited. Rightonblackburns.co.uk. Published 2019. Accessed Nov 13, 2020. https://www.rightonblackburns.co.uk/datasheets/view/Righton-Blackburns-Ltd_Bearing-Steels-Cronidur-30-AMS-5898-14108_ [Google Scholar]
- Anon 2001 Cronidur 30. (2001). Aircraft Engineering and Aerospace Technology, 73(1), 230–239. Aircraft Engineering and Aerospace Technology 73 aeat.2001.12773aad.014. DOI: 10.1108/aeat.2001.12773aad.014 [Google Scholar]
- FAG OEM und Handel AG Index of /PDF_catalogues/FAG. Ahrinternational.com. Published 2012. Accessed Feb 16, 2021. https://www.ahrinternational.com/PDF_catalogues/FAG/FAG_rolling_bearings_made _from_cronidur_30.pdf (Georg-Schäfer-Str. 30) [Google Scholar]
- Brainard W A 1968 The thermal stability and friction of the disulfides, diselenides, and ditellurides of molybdenum and tungsten in vaccum (10-9 to 10-6 TORR) NASA Technical Note D-5141 1–26 [Google Scholar]
- Jamison W E and Cosgrove S L 1971 Friction Characteristics of Transition-Metal Disulfides and Diselenides A S L E Transactions 14 62–72. DOI: 10.1080/05698197108983228 [Google Scholar]
- Joly-Pottuz L and Iwaki M 2007 Superlubricity of Tungsten Disulfide Coatings in Ultra High Vacuum Superlubricity ed A Erdemir and J-M B T-S Martin (Amsterdam: Elsevier) pp 227–36. DOI: 10.1016/B978-044452772-1/50045-7 [Google Scholar]
- Briscoe B J and Evans D C B 1982 SHEAR PROPERTIES OF LANGMUIR-BLODGETT LAYERS. Proceedings of The Royal Society of London, Series A: Mathematical and Physical Sciences 380 389–407. DOI: 10.1098/rspa.1982.0048 [Google Scholar]
- Stupp B C 1981 Synergistic effects of metals co-sputtered with MoS2 Thin Solid Films 84 257–66. DOI: 10.1016/0040-6090(81)90023-7 [CrossRef] [Google Scholar]
- Fleischauer P D 1984 Effects of crystallite orientation on environmental stability and lubrication properties of sputtered moSASLE Transactions27 82–8. DOI: 10.1080/05698198408981548 [Google Scholar]
- Donnet C, Le Mogne T and Martin J M 1993 Superlow friction of oxygen-free MoS2 coatings in ultrahigh vacuum Surface and Coatings Technology 62 406–11. DOI: https://doi.org/10.1016/0257-8972(93)90275-S [Google Scholar]
- Oviedo J P, KC S, Lu N, Wang J, Cho K, Wallace R M and Kim M J 2015 In Situ TEM Characterization of Shear-Stress-Induced Interlayer Sliding in the Cross Section View of Molybdenum Disulfide ACS Nano 9 1543–51. DOI: 10.1021/nn506052d [CrossRef] [PubMed] [Google Scholar]
- Hao R, Tedstone A A, Lewis D J, Warrens C P, West K R, Howard P, Gaemers S, Dillon S J and O’Brien P 2017 Property Self-Optimization During Wear of MoS 2 ACS Applied Materials & Interfaces 9 1953–8. DOI: 10.1021/acsami.6b13802 [CrossRef] [PubMed] [Google Scholar]
- Onodera T, Morita Y, Nagumo R, Miura R, Suzuki A, Tsuboi H, Hatakeyama N, Endou A, Takaba H, Dassenoy F, Minfray C, Joly-Pottuz L, Kubo M, Martin J-M and Miyamoto A 2010 A Computational Chemistry Study on Friction of h-MoS2. Part II. Friction Anisotropy The Journal of Physical Chemistry B 114 15832–8. DOI: 10.1021/jp1064775 [CrossRef] [PubMed] [Google Scholar]
- Peterson M B and Johnson R L 1953 Friction and Wear Investigation of Molybdenum Disulfide: I--Effect of Moisture National Advisory Committee for Aeronautics [Google Scholar]
- Panitz J K G, Pope L E, Lyons J E and Staley D J 1988 The tribological properties of MoS2 coatings in vacuum, low relative humidity, and high relative humidity environments Journal of Vacuum Science & Technology A 6 1166–70. DOI: 10.1116/1.575669 [CrossRef] [Google Scholar]
- Baker R T K, Chludzinski J J and Sherwood R D 1987 In-situ electron microscopy study of the reactivity of molybdenum disulphide in various gaseous environments Journal of Materials Science 22 3831–42. DOI: 10.1007/BF01133329 [CrossRef] [Google Scholar]
- Khare H S and Burris D L 2013 The Effects of Environmental Water and Oxygen on the Temperature-Dependent Friction of Sputtered Molybdenum Disulfide Tribology Letters 52 485–93. DOI: 10.1007/s11249-013-0233-8 [Google Scholar]
- Gao X, Hu M, Sun J, Fu Y, Yang J, Liu W and Weng L 2015 Changes in the composition, structure and friction property of sputtered MoS2 films by LEO environment exposure Applied Surface Science 330 30–8. DOI: 10.1016/j.apsusc.2014.12.175 [CrossRef] [Google Scholar]
- Bichsel R, Buffat P and Levy F 1986 Correlation between process conditions, chemical composition and morphology of MoS2 films prepared by RF planar magnetron sputtering Journal of Physics D: Applied Physics 19 1575–85. DOI: 10.1088/0022-3727/19/8/025 [CrossRef] [Google Scholar]
- Li H, Xie M, Zhang G, Fan X, Li X, Zhu M and Wang L 2018 Structure and tribological behavior of Pb-Ti/MoS2 nanoscaled multilayer films deposited by magnetron sputtering method Applied Surface Science 435 48–54. DOI: 10.1016/j.apsusc.2017.10.170 [CrossRef] [Google Scholar]
- Wei C-Y, Lee P-C, Tsao C-W, Lee L-H, Wang D-Y and Wen C-Y 2020 In situ Scanning Electron Microscopy Observation of MoS2 Nanosheets during Lithiation in Lithium Ion Batteries ACS Applied Energy Materials 3 7066–72. DOI: 10.1021/acsaem.0c01102 [CrossRef] [Google Scholar]
- Pope L E and Panitz J K G 1988 The effects of hertzian stress and test atmosphere on the friction coefficients of MoS2 coatings Surface and Coatings Technology 36 341–50. DOI: 10.1016/0257-8972(88)90164-8 [CrossRef] [Google Scholar]
- Lovell M R, Khonsari M M and Marangoni R D 1997 Frictional Analysis of MoS2 Coated Ball Bearings: A Three-Dimensional Finite Element Analysis Journal of Tribology 3 754–63. DOI: 10.1115/1.2833881 [CrossRef] [Google Scholar]
- Scharf T W, Kotula P and Prasad S V 2010 Friction and wear mechanisms in MoS2/Sb2O3/Au nanocomposite coatings Acta Materialia 58 4100–9. DOI: 10.1016/j.actamat.2010.03.040 [CrossRef] [Google Scholar]
- Asmoro G, Surojo E, Ariawan D, Muhayat N and Raharjo W W 2018 Role of solid lubricant (MoS2 and graphite) variations on characteristics of b3ake lining composite IOP Conference Series: Materials Science and Engineering 420 012022. DOI: 10.1088/1757-899X/420/1/012022 [CrossRef] [Google Scholar]
- Singer I L, Bolster R N, Wegand J, Fayeulle S and Stupp B C 1990 Hertzian stress contribution to low friction behavior of thin MoS2 coatings Applied Physics Letters 57 995–7. DOI: 10.1063/1.104276 [CrossRef] [Google Scholar]
- Li H, Xie M, Zhang G, Fan X, Li X, Zhu M and Wang L 2018 Structure and tribological behavior of Pb-Ti/ MoS2nanoscaled multilayer films deposited by magnetron sputtering method Applied Surface Science 435 48–54. DOI: 10.1016/j.apsusc.2017.10.170 [CrossRef] [Google Scholar]
- Curry J F, Wilson M A, Luftman H S, Strandwitz N C, Argibay N, Chandross M, Sidebottom M A and Krick B A 2017 Impact of Microstructure on MoS2 Oxidation and Friction ACS Applied Materials & Interfaces 9 28019–26. DOI: 10.1021/acsami.7b06917 [CrossRef] [PubMed] [Google Scholar]
- Wei C-Y, Lee P-C, Tsao C-W, Lee L-H, Wang D-Y and Wen C-Y 2020 In situ Scanning Electron Microscopy Observation of MoS2 Nanosheets during Lithiation in Lithium Ion Batteries ACS Applied Energy Materials 3 7066–72. DOI: 10.1021/acsaem.0c01102 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.