EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 402 (2023) E3S Web of Conf., 402 (2023) 05002 References
Open Access
Issue
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
Article Number 05002
Number of page(s) 8
Section Solar Energy Conversion, Sustainable Energy and Smart Grid
DOI https://doi.org/10.1051/e3sconf/202340205002
Published online 19 July 2023
  1. Y. Solyaev, A. Babaytsev. Direct observation of plastic shear strain concentration in the thick GLARE laminates under bending loading. Composites Part B: Engineering, Vol. 224, 2021. [Google Scholar]
  2. Prokudin, O.A., Solyaev, Y.O., Babaytsev, A.V., Artemyev, A.V., etc. Dynamic characteristics of three-layer beams with load-bearing layers made of alumino-glass plastic. PNRPU Mechanics Bulletinthis link is disabled, 2020, 2020(4), pp. 260–270. [CrossRef] [Google Scholar]
  3. A.V. Babaytsev, L. N. Rabinskiy, Kyaw Thu Aung. Investigation of the contact zone of a cylindrical shell located between two parallel rigid plates with a gap. Incas bulletin Volume 12 pp. 43 – 52. DOI: 10.13111/2066-8201.2020.12.S.4 (2020). [CrossRef] [Google Scholar]
  4. Amosov, A. G. (2021). Classification indicators of maintainability of technical systems. AIP Conference Proceedings, 2402. [Google Scholar]
  5. Amosov, A. G. (2021). Curvilinear trajectory of track machines. AIP Conference Proceedings, 2402. [Google Scholar]
  6. Pogodin V.A., Astapov A.N., Eremkina M.S., Babaytsev A.V., Rabinskiy L.N. Investigation of the low-temperature oxidation effect on the structure and mechanical properties of c/c composite. Nanoscience and Technology, Vol. 12, Issue 3, pp. 29 – 46, 2021, DOI: 10.1615/NanoSciTechnolIntJ.2021037997. [CrossRef] [Google Scholar]
  7. Y. Solyaev, A. Babaytsev, A. Ustenko, A. Ripetskiy, A. Volkov. Static and dynamic response of sandwich beams with lattice and pantographic cores. Journal of Sandwich Structures and Materials 0(0) 1–24, 2021, DOI: https://doi.org/10.1177/10996362211033896. [Google Scholar]
  8. Astapov, A., Rabinskiy, L., & Tushavina, O. (2021). Oxidation resistance of a si–tisi2–mosi2–tib2–casi2 coating on a cf/c–sic substrate in high-speed high-enthalpy air plasma flows. Nanomaterials, 11(10). [Google Scholar]
  9. Astapov, A. N., Rabinskiy, L. N., Tushavina, O. V., & Starovoitov, E. I. (2021). Influence of air plasma flow on a cf /sic composite with a si-tisi2-mosi2-tib2-casi2 heat-resistant coating system. Journal of the Balkan Tribological Association, 27(2), 231-242. [Google Scholar]
  10. Babaytsev, A. V., Kuznetsova, E. L., Rabinskiy, L. N., & Tushavina, O. V. (2020). Investigation of permanent strains in nanomodified composites after molding at elevated temperatures. Periodico Tche Quimica, 17(34), 1055-1067. [Google Scholar]
  11. Babaytsev A.V., Zotov A.A. Designing and Calculation of Extruded Sections of an Inhomogeneous Composition. Russian Metallurgy (Metally). Volume 2019, Issue 13, 1 December 2019, Pages 1452-1455, DOI: 10.1134/S0036029519130020. [CrossRef] [Google Scholar]
  12. Pronina, P. F., Sun, Y., & Tushavina, O. V. (2020). Mathematical modelling of high-intensity heat flux on the elements of heat-shielding composite materials of a spacecraft. Journal of Applied Engineering Science, 18(4), 693-698. [CrossRef] [Google Scholar]
  13. B.A. Garibyan. Enhancement of Mechanical Properties of Inorganic Glass under Ultrasonic Treatment, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1829-1832. [Google Scholar]
  14. M.O. Kaptakov. Effect of Ultrasonic Treatment on Stability of TiO2 Aqueous Dispersions in Presence of Water-Soluble Polymers, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1821-1824. [Google Scholar]
  15. O.A. Butusova. Surface Modification of Titanium Dioxide Microparticles Under Ultrasonic Treatment, International Journal of Pharmaceutical Research, 2020, Vol. 12, I. 4, pp. 2292-2296. [Google Scholar]
  16. A.N. Tarasova. Vibration-based Method for Mechanochemical Coating Metallic Surfaces, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1160-1168. [Google Scholar]
  17. N.A. Bulychev. Study of Interaction of Surface-Active Polymers with ZnO Nanoparticles Synthesized in Ultrasonically Assisted Plasma Discharge, Nanoscience and Technology: An International Journal, 2022, Vol. 13, I. 1, pp. 55-65. [CrossRef] [Google Scholar]
  18. B.A. Garibyan. Mechanical Properties of Electroconductive Ceramics, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1825-1828. [Google Scholar]
  19. O.A. Butusova. Stabilization of Carbon Microparticles by High-Molecular Surfactants, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1147-1151. [Google Scholar]
  20. V. Goncharenko, Yu. Mikhaylov, N. Kartushina. Pattern recognition techniques for classifying aeroballistic flying vehicle paths, Neural Computing and Applications, 2022, Vol. 34, I. 5, pp. 4033-4045. [Google Scholar]
  21. A.Yu. Burova. Theoretical basis, concept and methodology of control and correction of turbojet engines thrust asymmetry, Journal of Physics: Conference Series, 2022, 2308(1), 012006. [CrossRef] [Google Scholar]
  22. O.A. Butusova. Vinyl Ether Copolymers as Stabilizers of Carbon Black Suspensions, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1152-1155. [Google Scholar]
  23. M.O. Kaptakov. Catalytic Desulfuration of Oil Products under Ultrasonic Treatment, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1838-1843. [Google Scholar]
  24. A.N. Tarasova. Effect of Reagent Concentrations on Equilibria in Water-Soluble Complexes, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1169-1172. [Google Scholar]
  25. O.A. Butusova. Adsorption Behaviour of Ethylhydroxyethyl Cellulose on the Surface of Microparticles of Titanium and Ferrous Oxides, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1156-1159. [Google Scholar]
  26. A.N. Tarasova. Effect of Vibration on Physical Properties of Polymeric Latexes, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1173-1180. [Google Scholar]
  27. M.O. Kaptakov. Enhancement of Quality of Oil Products under Ultrasonic Treatment, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1851-1855. [Google Scholar]
  28. Babaytsev, A., Nikitin A., Ripetskiy A.. VHCF of the 3D-Printed Aluminum Alloy AlSi10Mg. Inventions 8(1):33, DOI 10.3390/inventions8010033. [Google Scholar]
  29. Babaytsev, A. V., Orekhov, A. A., & Rabinskiy, L. N. (2020). Properties and microstructure of AlSi10Mg samples obtained by selective laser melting. Nanoscience and Technology, 11(3), 213-222. [CrossRef] [Google Scholar]
  30. Thant Zin Hein, Arseniy V. Babaytsev, A.V. Ripetskiy. Effect of build atmosphere on the surface roughness of AlSi10Mg samples produced by selective laser melting. Nanoscience and Technology: An International Journal, 2022, Vol. 13, Issue 1, pp. 1-9. [CrossRef] [Google Scholar]
  31. Babaytsev, A.V., Astapov, A.N., Ripetskiy, A.V., Sha, M. Verification of mechanical properties and surface topography of PH1 stainless steel samples obtained by selective laser melting. Periodicals of Engineering and Natural Sciences, 2021, 9(4), pp. 417–432. [CrossRef] [Google Scholar]
  32. Y. Solyaev, A. Babaytsev. Direct observation of plastic shear strain concentration in the thick GLARE laminates under bending loading. Composites Part B: Engineering, Vol. 224, 2021. Proceedings, 2402. [Google Scholar]
  33. Amosov, A. G. (2021). Special software application for antenna modelling in mechanical engineering. Journal of Physics: Conference Series, 1889(4). [Google Scholar]
  34. Amosov, A. G. (2021). Comparative analysis of requirements for industrial cleanliness in mechanical engineering. Journal of Physics: Conference Series, 1889(4). [Google Scholar]
  35. Bodryshev, V.V., Babaytsev, A.V., Orekhov, A.A., Min, Y.N. Digital method for analysing speckle-interferometric images of material deformation. Periodicals of Engineering and Natural Sciences, 2021, 9(3), pp. 886–900. [CrossRef] [Google Scholar]
  36. Orekhov, A., Rabinskiy, L., & Fedotenkov, G. (2022). Analytical model of heating an isotropic half-space by a moving laser source with a gaussian distribution. Symmetry, 14(4). [Google Scholar]
  37. N.A. Bulychev, L.N. Rabinskiy, O.V. Tushavina. Effect of Intensive Mechanic Vibration of Ultrasonic Frequency on Thermal Instable Low-Temperature Plasma, Nanoscience and Technology. An International Journal, 2020, Vol. 11, I. 1, pp. 15-21. [Google Scholar]
  38. Zhavoronok, S.I., Kurbatov, A.S., Rabinskiy, L.N. The Generalized Routh Equations in the Plate Theory of (Formula presented.) th Order and their Use in Problems of Normal Wave Dispersion in Heterogeneous Waveguides. Lobachevskii Journal of Mathematics, 2022, 43(7), pp. 2010–2018. [CrossRef] [Google Scholar]
  39. Rabinskiy L.N., Pogodin, V.A., Sitnikov S.A. Obtaining a composite material based on quartz woven filler and pyrolysis matrix of organosilicon resin. Periodicals of Engineering and Natural Sciences, 2021, 9(4), pp. 347–356. [CrossRef] [Google Scholar]
  40. Fedotenkov G., Rabinskiy, L., Lurie, S. Conductive Heat Transfer in Materials under Intense Heat Flows. Symmetry, 2022, 14(9), 1950. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.