Open Access
Issue
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
Article Number 02012
Number of page(s) 12
Section Agricultural Engineering and Mechanization
DOI https://doi.org/10.1051/e3sconf/202341302012
Published online 11 August 2023
  1. M. Bazli, H. Ashrafi, A. V. Oskouei, Effect of harsh environments on mechanical properties of GFRP pultruded profiles. Compos. Part B Eng., 99, 203–215 (2016) [CrossRef] [Google Scholar]
  2. X. Wang, L. Jiang, H. Shen, Z. Wu, Long-Term Performance of Pultruded Basalt Fiber Reinforced Polymer Profiles under Acidic Conditions. J. Mater. Civ. Eng., 30, 04018096 (2018) [CrossRef] [Google Scholar]
  3. Z. Wang, X.-L. Zhao, G. Xian, G. Wu, R. S. Raman, S. Al-Saadi, A. Haque, Long-term durability of basalt-and glass-fibre reinforced polymer (BFRP/GFRP) bars in seawater and sea sand concrete environment. Constr. Build. Mater., 139, 467–489 (2017) [CrossRef] [Google Scholar]
  4. L. Yan, N. Chouw, Effect of water, seawater and alkaline solution ageing on mechanical properties of flax fabricepoxy composites used for civil engineering applications. Constr. Build. Mater., 99, 118–127 (2015) [Google Scholar]
  5. Z. Lu, J. Xie, H. Zhang, J. Li, Long-term durability of basalt fiber-reinforced polymer (BFRP) sheets and the epoxy resin matrix under a wet–dry cyclic condition in a chloride-containing environment. Polymers, 9, 652 (2017) [CrossRef] [PubMed] [Google Scholar]
  6. H. Xin, A. Mosallam, Y. Liu, C. Wang, Y. Zhang, Impact of hydrothermal aging on rotational behavior of web-flange junctions of structural pultruded composite members for bridge applications. Compos. Part B Eng., 110, 279–297 (2017) [CrossRef] [Google Scholar]
  7. H. Xin, A. Mosallam, Y. Liu, F. Yang, Y. Zhang, Hydrothermal aging effects on shear behavior of pultruded FRP composite web-flange junctions in bridge application. Compos. Part B Eng., 110, 213–228 (2017) [CrossRef] [Google Scholar]
  8. Z. Wang, G. Xian, X.-L. Zhao, Effects of hydrothermal aging on carbon fiber/epoxy composites with different interfacial bonding strength. Constr. Build. Mater., 161, 634–648 (2018) [CrossRef] [Google Scholar]
  9. B. Hong, G. Xian, H. Li, Comparative study of the durability behaviors of epoxy-and polyurethane-based CFRP plates subjected to the combined effects of sustained bending and water/seawater immersion. Polymers, 9, 603 (2017) [CrossRef] [PubMed] [Google Scholar]
  10. P. K. Dutta, D. Hui, Low-temperature and freeze-thaw durability of thick composites. Compos. Part B Eng, 27, 371–379 (1996) [CrossRef] [Google Scholar]
  11. J. M. Sousa, J. R. Correia, S. Cabral-Fonseca, A. C. Diogo, Effects of thermal cycles on the mechanical response of pultruded GFRP profiles used in civil engineering applications. Compos. Struct., 116, 720–731 (2014) [CrossRef] [Google Scholar]
  12. H. Ashrafi, M. Bazli, A. Vatani Oskouei, L. Bazli, Effect of sequential exposure to UV radiation and water vapor condensation and extreme temperatures on the mechanical properties of GFRP bars. J. Compos. Constr., 22, 04017047 (2017) [Google Scholar]
  13. M. M. Shokrieh, A. Bayat, Effects of ultraviolet radiation on mechanical properties of glass/polyester composites. J. Compos. Mater., 41, 2443–2455 (2007) [CrossRef] [Google Scholar]
  14. M. Bazli, H. Ashrafi, A. Jafari, X.-L. Zhao, H. Gholipour, A. V. Oskouei, Effect of thickness and reinforcement configuration on flexural and impact behaviour of GFRP laminates after exposure to elevated temperatures. Compos. Part B Eng., 157, 76–99 (2019) [CrossRef] [Google Scholar]
  15. M. Di Ludovico, F. Piscitelli, A. Prota, M. Lavorgna, G. Mensitieri, G. Manfredi, Improved mechanical properties of CFRP laminates at elevated temperatures and freeze–thaw cycling. Constr. Build. Mater., 31, 273–283 (2012) [CrossRef] [Google Scholar]
  16. J. Sousa, J. Correia, J. Gonilha, S. Cabral-Fonseca, J. Firmo, T. Keller, Durability of adhesively bonded joints between pultruded GFRP adherents under hydrothermal and natural ageing. Compos. Part B Eng., 158, 475–488 (2019) [CrossRef] [Google Scholar]
  17. S. A. Grammatikos, R. G. Jones, M. Evernden, J. R. Correia, Thermal cycling effects on the durability of a pultruded GFRP material for off-shore civil engineering structures. Compos. Struct., 153, 297–310 (2016) [CrossRef] [Google Scholar]
  18. A. Jafari, H. Ashrafi, M. Bazli, T. Ozbakkaloglu, Effect of thermal cycles on mechanical response of pultruded glass fiber reinforced polymer profiles of different geometries. Compos. Struct., 223, 110959 (2019) [CrossRef] [Google Scholar]
  19. O. V. Startsev, M. P. Lebedev, A. K. Kychkin, Aging of polymer composites in extremely cold climates. Izvestiya Altayskogo gosudarstvennogo universiteta -Izvestiya of Altai State University, 1(111), 41–51 (2020) [CrossRef] [Google Scholar]
  20. E. N. Kablov, E. N. Startsev, Systematical analysis of the climatic influence on mechanical properties of the polymer composite materials based on domestic and foreign sources (review). Aviatsionnye materialy i tekhnologii – Aviation materials and technologies, 2, 47–58 (2018) [CrossRef] [Google Scholar]
  21. E. N. Kablov, O. V. Startsev, A. S. Krotov, V. N. Kirillov, Climatic aging aviation applications of composite materials. I. Mechanisms of aging. Deformatsiya i razrushenie materialov – Deformation and Fracture of Materials, 11, 19–26 (2010) [Google Scholar]
  22. E. N. Kablov, O. V. Startsev, A. S. Krotov, V. N. Kirillov, Climatic aging aviation applications of composite materials. II. Relaxation of the initial disequilibrium and structural properties of the gradient across the thickness. Deformatsiya i razrushenie materialov – Deformation and Fracture of Materials, 12, 40–46 (2010) [Google Scholar]
  23. E. N. Kablov, O. V. Startsev, A. S. Krotov, V. N. Kirillov. Klimaticheskoe starenie kompozitsionnykh materialov aviatsionnogo naznacheniya. III. Znachimye faktory stareniya [Climatic aging aviation applications of composite materials. III. Significant factors of aging]. Deformatsiya i razrushenie materialov – Deformation and Fracture of Materials, 1, 34–40 (2011) [Google Scholar]
  24. A. L. Pomerantsev, Methods of nonlinear regressive analysis for simulating kinetics of the chemical and physical processes, d-r fiz.-mat. nauk – Diss Dr. Sci. (Phys.-Math.), Moscow, 304 (2003) [Google Scholar]
  25. O. V. Startsev, A. S. Krotov, Sorption and diffusion of moisture in the fiberglass rods of circular cross section. Materialovedenie – Material Science, 6, 24–28 (2012) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.