Open Access
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
Article Number 02017
Number of page(s) 10
Section Agricultural Engineering and Mechanization
Published online 11 August 2023
  1. R. Wang, X.-G. Ren, Z. Yan, L.-J. Jiang, W. Sha, G.-C. Shan, Graphene based functional devices: A short review Frontiers of Physics, 14(1), 13603 (2019) DOI: 10.1007/s11467-018-0859-y [Google Scholar]
  2. C. M. Armstrong, R. Kowalczyk, A. Zubyk, K. Berg, C. Meadows, D. Chan, T. Schoemehl, R. Duggal, N. Hinch, R. B. True, R. Tobin, Sweeney M and Weatherford B A 2018 compact extremely high frequency MPM power amplifier IEEE Transactions on Electron Devices, 65(6), 2183-2188 (2018) DOI: 10.1109/TED.2018.2808327 [Google Scholar]
  3. P. Mathur, S. Raman, Electromagnetic Interference (EMI): Measurement and Reduction Techniques Journal of Electronic Materials, 49(5), 2975-2998 (2020) DOI: 10.1007/s11664-020-07979-1 [Google Scholar]
  4. M. Zahid, S. Siddique, R. Anum, M. F. Shakir, Y. Nawab, Z. A. Rehan, M-type barium hexaferrite-based nanocomposites for EMI shielding application: Journal of Superconductivity and Novel Magnetism, 34(4), 1019-1045 (2021) DOI: 10.1007/s10948-021-05859-1 [Google Scholar]
  5. U. Rath, P. M. Pandey, Investigations into the microwave shielding behavior of oriented Polycaprolactone/Carbonyl iron particles composites fabricated using magnetic field assisted extrusion 3D printing Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235(15), 2768-2781 (2021) DOI: 10.1177/0954406220959098 [CrossRef] [Google Scholar]
  6. Q. Zhang, Z. Du, M. Hou, Z. Ding, X. Huang, A. Chen, Y. Ma, S. Lu, X.-Z. Tang, Ultralight, anisotropic, and self-supported graphene/MWCNT aerogel with high-performance microwave absorption Carbon, 188, 442-452 (2022) DOI: 10.1016/j.carbon.2021.11.047 [Google Scholar]
  7. W.-H. Choi, B.-S. Kwak, J.-H. Kweon, Y.-W. Nam, Microwave absorbing structure using periodic pattern coated fabric Composite Structures, 238, 111953 (2020) DOI: 10.1016/j.compstruct.2020.111953 [Google Scholar]
  8. E. Pittella, L. D'Alvia, E. Palermo, E. Piuzzi, Microwave Characterization of 3D Printed PLA and PLA/CNT Composites 6th International Forum on Research and Technology for Society and Industry, RTSI 2021 – Proceedings, 52-56 (2021) DOI: 10.1109/RTSI50628.2021.9597226 [Google Scholar]
  9. G. E. Kuleshov, A. V. Badin, M. O. Gering, Electromagnetic properties of composite materials based on ABS plastic with carbon nanotubes obtained by the additive technology in the SHF and EHF bands IOP Conference Series: Materials Science and Engineering, 731(1), 012014 (2020) DOI: 10.1088/1757-899X/731/1/012014 [Google Scholar]
  10. T. Hanemann, D. Syperek, D. Nötzel, 3D printing of ABS barium ferrite composites Materials, 13(6), 1481 (2020) DOI: 10.3390/ma13061481 [Google Scholar]
  11. C. Vong, A. Chevalier, A. Maalouf, J. Ville, J.-F. Rosnarho, V. Laur, Manufacturing of a magnetic composite flexible filament and optimization of a 3D printed wideband electromagnetic multilayer absorber in X-ku frequency bands Materials, 15(9), 3320 (2022) DOI: 10.3390/ma15093320 [Google Scholar]
  12. G. Liu, X. Zhang, X. Chen, Y. He, L. Cheng, M. Huo, J. Yin, F. Hao, S. Chen, P. Wang, S. Yi, L. Wan, Z. Mao, Z. Chen, X. Wang, Z. Cao, J. Lu, Additive manufacturing of structural materials Materials Science and Engineering R: Reports, 1 45, 100596 (2021) DOI: 0.1016/j.mser.2020.100596 [Google Scholar]
  13. J. Melendro-Jimenez, P. Sanchez-Olivares, A. Tamayo-Dominguez, X. Sun, J. Fernandez-Gonzalez, 3D printed directive beam-steering antenna based on gradient index flat lens with an integrated polarizer for dual circular polarization at W-band IEEE Transactions on Antennas and Propagation, 1-6 (2022)DOI: 10.1109/TAP.2022.3217177 [Google Scholar]
  14. C. Tomassoni, O. A. Peverini, G. Venanzoni, G. Addamo, F. Paonessa, G. Virone, 3D printing of microwave and millimeter-wave filters: Additive manufacturing technologies applied in the development of high-performance filters with novel topologies IEEE Microwave Magazine, 21(6), 24-45 (2020) DOI: 10.1109/MMM.2020.2979153 [Google Scholar]
  15. Y.-G. Park, I. Yun, W. G. Chung, W. Park, D. H. Lee, J.-U. Park, High-resolution 3D printing for electronics Advanced Science, 9(8), 2104623,= (2022) DOI: 10.1002/advs.202104623 [Google Scholar]
  16. M. Popov, I. Zavislyak, A. Ustinov, G. Srinivasan, Sub-terahertz magnetic and dielectric excitations in hexagonal ferrites IEEE Transactions on Magnetics, 47, 289-294 (2011) DOI: 10.1109/TMAG.2010.2091677 [Google Scholar]
  17. J. Smith, H. Wayne, Ferrites, 504 (1962) [Google Scholar]
  18. D. Klimyuk, M. Serezhkin, A. Plokhikh, Application of 3D printing in sheet metal forming, Materials Today: Proceedings, 38(4), 1579-1583 (2021) [CrossRef] [Google Scholar]
  19. F. A. Fedulov, D. V. Saveliev, D. V. Chashin, S. B. Odinokov, A. S. Kuznetsov, Y. K. Fetisov, Anisotropy of magnetoelectric effects in a planar heterostructure comprising a piezoelectric substrate and a ferromagnetic grating, Journal of Magnetism and Magnetic Materials, 547, 168943 (2022) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.