Open Access
Issue |
E3S Web Conf.
Volume 427, 2023
International Conference on Geotechnical Engineering and Energetic-Iraq (ICGEE 2023)
|
|
---|---|---|
Article Number | 03032 | |
Number of page(s) | 6 | |
Section | Transportation Science and Technology | |
DOI | https://doi.org/10.1051/e3sconf/202342703032 | |
Published online | 13 September 2023 |
- ASTM D8-02, Standard Terminology Relating to Materials for Road and Pavements, Annual Book of ASTM Standards. 2004. [Google Scholar]
- Huang, Yang Hsien, et al. Pavement analysis and design. Upper Saddle River, NJ: Pearson Prentice Hall. 2004. [Google Scholar]
- Shahin, M. Y., Blackmon, E. W., Van Dam, T., Kirchner, K. Consequence of Layer Separation on Pavement Performance. Report No. DOT/FAA/PM-86/48. Federal Aviation Administration, Washington, D.C. 1987. [Google Scholar]
- Abed, Alaa H.; BAHIA, Hussain U. Enhancement of permanent deformation resistance of modified asphalt concrete mixtures with nano-high density polyethylene. Construction and Building Materials. 2020. [Google Scholar]
- Roffe, J.C. and F. Chaignon. Characterization Tests on Bond Coats: Worldwide Study, Impact, Tests, and Recommendations. 3rd International Conference on Bituminous Mixtures and Pavements, Thessaloniki, Greece. 2002. [Google Scholar]
- Tashman, L., K. Nam and T. Papagiannakis. Evaluation of the Influence of Tack Coat Road mark 4- 2011 Road Science, LLC. BondTekk is a registered service Science, LLC. 2006. [Google Scholar]
- Karkush M.O., Alkaby A.D.. Numerical Modeling of Pullout Capacity of Screw Piles Under Seismic Loading in Layered Soil. Transportation Infrastructure Geotechnology. 2023 Feb;10(1):125–146. [CrossRef] [Google Scholar]
- Karkush M.O., Mukhlef O.J.. Experimental Pullout Capacity of Screw Piles in Dry Gypseous Soil. InE3S Web of Conferences 2021 (Vol. 318, p. 01002). EDP Sciences. [CrossRef] [EDP Sciences] [Google Scholar]
- Hussein A.A., Karkush M.O.. Experimental Investigation of Pullout Capacity of Screw Piles in Soft Clayey Soil. In Geotechnical Engineering and Sustainable Construction: Sustainable Geotechnical Engineering 2022 Mar 20 (pp. 315–327). Singapore: Springer Singapore. [CrossRef] [Google Scholar]
- Mohammad, L.N., Elseifi, M.A., Bae, A., Patel, N., Button, J. and Scherocman, J.A. Optimization of Tack Coat for HMA Placement. National Cooperative Highway Research Program, No. NCHRP 712, Washington, D.C.: Transportation Research Boar. 2012. [Google Scholar]
- ROFFE, Jean-Claude; CHAIGNON, François. Characterisation tests on bond coats: worldwide study, impact, tests, and recommendations. In: Proceedings of the 3rd International Conference on Bituminous Mixtures and Pavements, Held Thessaloniki, Greece, November 2002. 2002. [Google Scholar]
- Sompie, Tampanatu; Pangemanan, Syanne. Shear strength of tack coat on flexible pavement and composite pavement. In: Journal of the Civil Engineering Forum. Universitas Gadjah Mada. 2018. [Google Scholar]
- Wang, J., F. Xiao, Z. Chen, X. Li and S. Amirkhanian. Application of tack coat in pavement engineering. Construction and Building Materials. 2017; 152(1): 856–871. [CrossRef] [Google Scholar]
- Raab, C.; Partl, Manfred N. Interlayer shear performance: experience with different pavement structures. In: Proceedings of The 3rd Eurasphalt And Eurobitume Congress Held Vienna. 2004. [Google Scholar]
- Talha, Sk Abu. Laboratory and field characterization of micro-surfacing mix bond strength. PhD Thesis. Ohio University. 2019. [Google Scholar]
- Haftprüfgerät, Pull-off Tester, Proceq DYNA Z16 manual. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.