Open Access
Issue |
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
|
|
---|---|---|
Article Number | 01246 | |
Number of page(s) | 9 | |
DOI | https://doi.org/10.1051/e3sconf/202343001246 | |
Published online | 06 October 2023 |
- M. Naik, D.G. Thakur, Experimental investigation of effect of printing parameters on impact strength of the bio-inspired 3D printed specimen. Sadhana - Acad Proc Eng Sci 46:, (2021) [Google Scholar]
- Q. Sun, G.M. Rizvi CTB and PG, Effect of processing conditions on the bonding quality of FDM polymer filaments. Rapid Prototyp J 2:72–80., (2008) [CrossRef] [Google Scholar]
- S. Dev, R. Srivastava, Influence of process variables on mechanical properties and material weight of acrylic butadiene styrene parts produced by fused filament fabrication. Prog Addit Manuf., (2022) [Google Scholar]
- D. K. Yadav, R. Srivastava, S. Dev, Design & fabrication of ABS part by FDM for automobile application. Mater Today Proc 26:2089–2093, (2020) [CrossRef] [Google Scholar]
- O. A. Mohamed, S. H. Masood, J.L. Bhowmik, Mathematical modeling and FDM process parameters optimization using response surface methodology based on Q-optimal design. Appl Math Model 40:10052– 10073, (2016) [Google Scholar]
- M. Jiménez, L. Romero, I. A. Domínguez, et al Additive Manufacturing Technologies: An Overview about 3D Printing Methods and Future Prospects. Complexity 2019:.(2019) [Google Scholar]
- S. D. Srivastava and R, Effect of infill parameters on material sustainability and mechanical properties in fused deposition modelling process : A case study. Prog Addit Manuf 1–12. (2021) [Google Scholar]
- J. Liu, A. T. Gaynor, S. Chen, et al, Current and future trends in topology optimization for additive manufacturing. Struct Multidiscip Optim., (2018) [Google Scholar]
- M. Vaezi, C. K. Chua Effects of layer thickness and binder saturation level parameters on 3D printing process. Int J Adv Manuf Technol 53:275–284. (2014) [Google Scholar]
- A. Farzadi, M. Solati-hashjin, M. Asadi-eydivand , et al, Effect of Layer Thickness and Printing Orientation on Mechanical Properties and Dimensional Accuracy of 3D Printed Porous Samples for Bone Tissue Engineering. LOS ONE 9:1–14. (2014) [Google Scholar]
- A. Lanzotti, M. Grasso, G. Staiano, M. Martorelli, The Impact of Process Parameters on Mechanical Properties of Parts Fabricated in PLA with an Open-source 3-D Printer. Rapid Prototyp J 21:2014–0135, (2015) [Google Scholar]
- F. Ning, Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling : Effects of ... J Compos Mater 0:1–12. (2016) [Google Scholar]
- B. H. Lee, J. Abdullah, Z. A. Khan Optimization of rapid prototyping parameters for production of flexible ABS object. J Mater Process Technol 169:54–61. (2005) [CrossRef] [Google Scholar]
- J. P. Thomas, J.E. Renaud Design of Fused-Deposition ABS Components for Stiffness. J Mech Des 125:545–551. (2003) [CrossRef] [Google Scholar]
- F. Rodrı, J. P. Thomas, J. E. Renaud, materials modeling Mechanical behavior of acrylonitrile butadiene styrene fused deposition materials modeling. Rapid Prototyp J 9:219–230. (2003) [CrossRef] [Google Scholar]
- E. Ulu, E. Korkmaz, K. Yay, et al, Enhancing the Structural Performance of Additively Manufactured Objects Through Build Orientation Optimization. J Mech Des. (2015) [Google Scholar]
- W. Wu, P. Geng, G. Li, et al, Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS. Materials (Basel) 8:5834–5846. (2015) [CrossRef] [PubMed] [Google Scholar]
- S. Vyavahare, S. Kumar, Experimental study of surface roughness , dimensional accuracy and time of fabrication of parts produced by fused deposition modelling. Rapid Prototyp J. (2020) [Google Scholar]
- M. P. G. Chandrashekarappa, G. R. Chate, Parashivamurthy V, et al, Analysis and optimization of dimensional accuracy and porosity of high impact polystyrene material printed by FDM process: PSO, JAYA, Rao, and bald eagle search algorithms. Materials (Basel) 14:1–20., (2021) [Google Scholar]
- A. K. Sood, R. K. Ohdar, S. S. Mahapatra, Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method. Mater Des 30:4243–4252. (2009) [CrossRef] [Google Scholar]
- P. Yadav, A. Sahai, R. S. Sharma, Strength and Surface Characteristics of FDM-Based 3D Printed PLA Parts for Multiple Infill Design Patterns. J Inst Eng Ser C 102:197–207. (2021) [CrossRef] [Google Scholar]
- P. Yadav, A. Sahai, R. S. Sharma, Flexural Strength and Surface Profiling of Carbon-Based PLA Parts by Additive Manufacturing. J Inst Eng Ser C 102:921–931. (2021) [CrossRef] [Google Scholar]
- M. Juneja, N. Thakur, D. Kumar, et al, Accuracy in dental surgical guide fabrication using different 3-D printing techniques. Addit Manuf 22:243–255. (2018) [Google Scholar]
- S. Ahn, P. K. Wright, Anisotropic material properties of fused deposition modeling ABS. Rapid Prototyp Journa 8:248–257. (2002) [CrossRef] [Google Scholar]
- K. C. Ang, K. F. Leong, C. K. Chua, Investigation of the mechanical properties and porosity relationships in fused deposition modelling-fabricated porous structures. Rapid Prototyp J 12:100–105. (2006) [CrossRef] [Google Scholar]
- F. Rayegani, G. C. Onwubolu, Fused deposition modelling (fdm) process parameter prediction and optimization using group method for data handling (gmdh) and differential evolution (de). Int J Adv Manuf Technol 73:509–519. (2014) [CrossRef] [Google Scholar]
- J. M. Chacón, M. A. Caminero, E. García-Plaza, P. J. Núñez, Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection. Mater Des 124:143–157. (2017) [CrossRef] [Google Scholar]
- J. Butt, R. Bhaskar, Investigating the effects of annealing on the mechanical properties of FFF-printed thermoplastics. J Manuf Mater Process 4:1–20. (2020) [Google Scholar]
- C. Ziemian, M. Sharma, S. Ziemian, Anisotropic Mechanical Properties of ABS Parts Fabricated by Fused Deposition Modelling. Mech Eng 23:2397. (2012) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.