EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 434 (2023) E3S Web Conf., 434 (2023) 02012 References
Open Access
Issue
E3S Web Conf.
Volume 434, 2023
4th International Conference on Energetics, Civil and Agricultural Engineering (ICECAE 2023)
Article Number 02012
Number of page(s) 6
Section Civil Engineering
DOI https://doi.org/10.1051/e3sconf/202343402012
Published online 12 October 2023
  1. K. Turgunov, N. Annaev, A. Umarov, Optimizing the parameters of leather pressing machines. Journal of Physics: Conference Series 2373, 072006 (2022) [CrossRef] [Google Scholar]
  2. Sh.R. Khurramov, To the development of the theory of contact in two-roll modules. Journal of Physics: Conference Series 1901, 012115 (2021) [CrossRef] [Google Scholar]
  3. L.A. Galin, Contact problems of the theory of elasticity and viscoelasticity, Science, Moscow (1980) [Google Scholar]
  4. Sh.R. Khurramov, F.S. Khalturaev, F.Z. Kurbanova, Modeling the contact curves of leather squeezing machines. Journal of Physics: Conference Series 2373, 072002 (2022) [CrossRef] [Google Scholar]
  5. V. Alexa, A.-J. Nussabon, Theoretical and economical consideration about parametrical forces of asymmetrical rolling, Annals of the faculty of Engineering Hunedoara IV, 1 (2006) [Google Scholar]
  6. O.M. Volchkov, Improving methods for calculating and design of elastic Coating of pressure roll for wet flax spinning machines, Cand. Tech. Sci. Dissertation, Kostroma (2000) [Google Scholar]
  7. T.P. Tutskaya, Rational technological modes of deformation of cotton fabrics during processing in roller machines, Cand. Tech. Sci. Diss., Ivanova (2009) [Google Scholar]
  8. A. Amanov, S.R. Khurramov, G.A. Bahadirov, A. Abdukarimov, T.Y. Amanov, Modeling of strain and filtration properties of a semi-finished leather product, Journal of Leather Science and Engineering 3(1), 14 (2021) [CrossRef] [Google Scholar]
  9. Sh.R. Khurramov, F.S. Khalturayev, F.Z. Kurbanova, Deformation and Filtration Characteristics of a Leather Semi-Finished Product. Decision and Control 342, 227–241 (2021) [Google Scholar]
  10. Al Halabe Rafe, Development of a method for setting up an offset printing unit of modern sheet machines, Cand. Tech. Sci. Diss., Moscow (2003) [Google Scholar]
  11. S. Khurramov, B. Abdurakhmonov, Contact Problems of the Theory of Roller Squeezing of Leather. AIP Conference Proceedings 2637, 060003 (2022) [CrossRef] [Google Scholar]
  12. A.N. Marinin, Yu.G. Fomin, I.Kh. Sviridov, Estimation of elastic deformation of roll coating. Textile Industry Technology 328, 118–121 (2010) [Google Scholar]
  13. Sh.R. Khurramov, F.S. Khalturaev, E.S. Buriev, Residual moisture content in semi- finished leather under roller pressing. AIP Conference Proceedings 2402, 030038 (2021) [CrossRef] [Google Scholar]
  14. A.V. Korolev, Study of the physical and mechanical properties of polyurethane covering the press rolls of paper-making machines in order to increase their resource, Candidate of Technical Sciences Dissertation, Ekaterinburg Technical University, Ekaterinburg (2013) [Google Scholar]
  15. Sh.R. Khurramov, A. Abdukarimov, F.S. Khalturayev, F.Z. Kurbanova, Modeling of friction stress in twin roll modules. J. Physics: Conference Series 1789, 012008 (2021) [CrossRef] [Google Scholar]
  16. M.V. Kolychev, N.N. Kokushin, Study of the deformation properties of press felt in paper making machines. Cellulose.Paper.Cardboard 6, 68–72 (2015) [Google Scholar]
  17. N.E. Novikov, Pressing of paper web, Teacher, Moscow (1998) [Google Scholar]
  18. Sh.R. Khurramov, Analytical description of the contact curve shape of the rolls in the two-roll module. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil'noi Promyshlennosti 4 (2021) [Google Scholar]
  19. K. Turgunov, N. Annaev, A. Umarov, Optimizing the parameters of leather pressing machines. Journal of Physics: Conference Series 2373, 072006 (2022) [CrossRef] [Google Scholar]
  20. S. Khurramov, F. Khalturaev, F.Z. Kurbanova, Filtration velocity under roller squeezing. E3S Web of Conferences 376, 01053 (2023) [CrossRef] [EDP Sciences] [Google Scholar]
  21. V.A. Nikolaev, A.A. Vasilyev Analysis of Strip Asymmetrical Cold Rolling Parameters, Metallurgical and Mining Industry 2, 405–412 (2010) [Google Scholar]
  22. Sh.R. Khurramov, F.S. Khalturaev, F.Z. Kurbanova, Theoretical analysis of the conditions of capture in an asymmetric two-roll module. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil'noi Promyshlennosti 4 (2021) [Google Scholar]
  23. G.K. Kuznetsov, Research and methodology for designing roll presses devices of textile machines, Doc. Tech. Sci. Diss., Kostroma (1970) [Google Scholar]
  24. S.C. Pan, M.N. Huang, G.-Y.T. Zou, S.W. Syu, Analysis of asymmetrical cold and hot bond rolling of unbounded clad sheet under contact shear friction. Journal of Materials Processing Technology 177, 114–120 (2006) [CrossRef] [Google Scholar]
  25. Sh.R. Khurramov, F.S. Khalturaev, Simulation of contact stresses in two-roll modules. IOP Conf.Series: Earth and Environmental Science 614, 012097 (2020) [CrossRef] [Google Scholar]
  26. T. Yung, G. Yan-hui, W. Zhiao-dong, W. Cuo-dong, Analysis of Rolling Pressure in Asymmetrical Rolling Process by Slab Method. Journal of Iron and Steel Research 16, 22–26 (2009) [Google Scholar]
  27. X. Tan, Friction of plasticity: application of the dynamic friction model. Proceedings of the Institution of Mechanical Engineers, Part J: Journal ofEngineering Tribology 221(2), 115–131 (2007) [CrossRef] [Google Scholar]
  28. S. Khurramov, B. Abdurakhmonov, Contact Problems of the Theory of Roller Squeezing of Leather. AIP Conference Proceedings 2637, 060003 (2022) [CrossRef] [Google Scholar]
  29. A.P. Grudev, Gripping ability of mill rolls, Science, Moscow (1998) [Google Scholar]
  30. V. Alexa, S. Ratiu, I. Kiss, Metal Rolling-Asymmetrical rolling process. IOP Conference Series: Materials Science and Engineering 106, 012019 (2016) [CrossRef] [Google Scholar]
  31. Sh.R. Khurramov, G.A. Bahadirov, To the solution problems of contact interaction in a two-roll module. Journal of Physics: Conference Series 1889, 042029 (2021) [CrossRef] [Google Scholar]
  32. Yu.G. Fomin, Development of theoretical foundations and means to improve efficiency of processing of fabrics with roll modules of finishing machines, Doc. Tech. Sci. Diss., Moscow (2001) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.