EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 434 (2023) E3S Web Conf., 434 (2023) 02016 References
Open Access
Issue
E3S Web Conf.
Volume 434, 2023
4th International Conference on Energetics, Civil and Agricultural Engineering (ICECAE 2023)
Article Number 02016
Number of page(s) 6
Section Civil Engineering
DOI https://doi.org/10.1051/e3sconf/202343402016
Published online 12 October 2023
  1. J.A. Dunford, P.M. Wild, Cyclic transverse compression of single wood pulp fibers. Journal of pulp and paper science 28, 4 (2002) [Google Scholar]
  2. D. Bežanović, C.J. Van Duijn, E.F. Kaasschieter, Analysis of Wet Pressing of Paper: The Three-Phase Model. Part II: Compressible Air Case. Transp Porous Med 67, 171–187 (2007) [CrossRef] [Google Scholar]
  3. Sh.R. Khurramov, F.S. Khalturaev, Simulation of contact stresses in two-roll modules. IOP Conf.Series: Earth and Environmental Science 614, 012097 (2020) [CrossRef] [Google Scholar]
  4. Sh.R. Khurramov, G.A. Bahadirov, E.S. Buriev, D.N. Abdukhalikova, Modeling of the roller pressing of fibrous materials. E3S Web of Conference 264, 01019 (2021) [CrossRef] [EDP Sciences] [Google Scholar]
  5. G.K. Kuznetsov, Research and methodology for designing roll squeezing devices for textile machines, Doc. Tech. Sci. Diss., Kostroma (1970) [Google Scholar]
  6. N.E. Novikov, Pressing of paper web, Science, Moscow (1998) [Google Scholar]
  7. V.S. Paramonov, The study of transport mechanisms in relation the creation of new skinning and similar roller machines for leather production, Cand. Tech. Sci. Diss., Moscow (1973) [Google Scholar]
  8. S. Khurramov, F. Khalturaev, F. Kurbanova, E3S Web of Conferences 376, 01053 (2023) [CrossRef] [EDP Sciences] [Google Scholar]
  9. Yu.G. Fomin, Development of theoretical foundations and means to improve efficiency of processing of fabrics with roll modules of finishing machines, Dis. … Doc. Tech. Sci., Moscow (2001) [Google Scholar]
  10. Sh.R. Khurramov, Filtration rates in roller pressing of fibrous materials. AIP Conference Proceedings 2402, 030042 (2021) [CrossRef] [Google Scholar]
  11. Sh.R. Khurramov, F.S. Khalturaev, E.S. Buriev, Residual moisture content in semi-finished leather under roller pressing. AIP Conference Proceedings 2402, 030038 (2021) [CrossRef] [Google Scholar]
  12. S.A. Polumiskov, Roll impregnator research and development of the method for calculating its design and technological parameters, Cand. Tech. Sci. Diss., Ivanovo (1997) [Google Scholar]
  13. K. Turgunov, N. Annaev, A. Umarov, Optimizing the parameters of leather pressing machines. Journal of Physics: Conference Series 2373, 072006 (2022) [CrossRef] [Google Scholar]
  14. Sh.R. Khurramov, A. Abdukarimov, F.S. Khalturayev, F.Z. Kurbanova, Modeling of friction forces in an asymmetric two-roll module. IOP Conf. Series: Materials Science and Engineering 916, 012051 (2020) [CrossRef] [Google Scholar]
  15. O.P. Maksimenko, A.A. Nikulin, R.Ya. Romanyuk, Theoretical analysis of the gripping ability of rolls in steady state rolling, News of universities. Ferrous metallurgy 10, 2008 (2008) [Google Scholar]
  16. Sh.R. Khurramov, A. Abdukarimov, F.S. Khalturayev, F.Z. Kurbanova, Modeling of friction stress in two roll modules. Journal of Physics: Conference Series 1789, 012008 (2021) [CrossRef] [Google Scholar]
  17. A. Kavalek, Forming of band curvature in asymmetrical rolling process. Journal of Materials Processing Technolody 155, 2033–2038 (2004) [Google Scholar]
  18. A. Kavalek et al., The analysis of the asymmetric plate rolling process, Materials Science Forum 706-709, 1438–1443 (2012) [Google Scholar]
  19. A. Amanov, S.R. Khurramov, G.A. Bahadirov, A. Abdukarimov, T.Y. Amanov, Modeling of strain and filtration properties of a semi-finished leather product. Journal of Leather Science and Engineering 3(1), 14 (2021) [CrossRef] [Google Scholar]
  20. S. Khurramov, B. Abdurakhmonov, Contact Problems of the Theory of Roller Squeezing of Leather. AIP Conference Proceedings 2637, 060003 (2022) [CrossRef] [Google Scholar]
  21. R.J. Clos, L.L. Edwars, I. Gunaman, A limiting consistency model for pulp dewatering and wet pressing, Tappi Journal 77, 179–187 (1994) [Google Scholar]
  22. M.V. Kolychev, N.N. Kokushin, Study of the deformation properties of press felt in paper making machines. Cellulose Paper Cardboard 6, 68–72 (2015) [Google Scholar]
  23. V.A. Nikolaev, A.A. Vasilyev, Analysis of Strip Asymmetrical Cold Rolling Parameters. Metallurgical and Mining Industry 2, 405–412 (2010) [Google Scholar]
  24. S. Khurramov, F. Khalturaev, F. Kurbanova, Deformation and Filtration Characteristics of a Leather SemiFinished Product, In: A.G. Kravets, A.A. Bolshakov, M. Shcherbakov, (eds) Cyber-Physical Systems: Design and Application for Industry 4.0. Studies in Systems, Decision and Control, vol 342. Springer, Cham (2021) [Google Scholar]
  25. D. McDonald, R.J. Kerekes, J. Zhao, Perspectives on deriving mathematical models in pulp and paper science. BioResources 15, 7319–7329 (2020) [CrossRef] [Google Scholar]
  26. O. Iliev, G. Printsypar, S. Rief, On mathematical modeling and simulation of the pressing section of a paper machine including dynamic capillary effects: One dimensional model. J Transport in Porous Media 92, 41–59 (2012) [CrossRef] [Google Scholar]
  27. S. Khurramov, F. Kurbanova, Hydraulic Problems of the Theory of Roller Pressing Hides. AIP Conference Proceedings 2637, 060004 (2022) [CrossRef] [Google Scholar]
  28. E. Balan et al., Preventive maintenance features specific to offset printing machines, MATEC Web of Conferences 343, 08012 (2021) [CrossRef] [EDP Sciences] [Google Scholar]
  29. Sh.R. Khurramov, F.S. Khalturaev, F.Z. Kurbanova, Theoretical analysis of the conditions of capture in an asymmetric two-roll module. Teknologiya Tekstil'noi Promyshlennosti 4, 2021 (2021) [Google Scholar]
  30. G. Bahadirov, G. Tsoy, E. Nabiev, A. Umarov, Experiments on Moisture Squeezing from a Leather SemiFinished Product. Int. J. Recent Technology and Engineering 8, 3367–3371 (2020) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.