Open Access
| Issue |
E3S Web Conf.
Volume 455, 2023
First International Conference on Green Energy, Environmental Engineering and Sustainable Technologies 2023 (ICGEST 2023)
|
|
|---|---|---|
| Article Number | 02014 | |
| Number of page(s) | 7 | |
| Section | Renewable & Sustainable Energy Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202345502014 | |
| Published online | 05 December 2023 | |
- M. Y. Khan, P. S. Rao, Int J of Innov Tech & Explor Engg 8(11) 1696–1701 (2019). [CrossRef] [Google Scholar]
- C. Guo, S. Di, D. Wei, Mater & Manufac Proc 31(14) 1865–1871 (2016). [CrossRef] [Google Scholar]
- M.Y. Khan, P. S. Rao, B. S. Pabla, Adv in Mat & Process Technol 8(S4), 2204–2230 (2022). [Google Scholar]
- Kunal, P.S. Rao, M.Y. Khan, K. Saidaiah, Mat Tod: Proc 62(6) 3707–3712 (2022). [CrossRef] [Google Scholar]
- G. Semon, A practical guide to electro-discharge machining 2nd ed. (Atelier De Charmilles, Geneva, 1975). [Google Scholar]
- S. D. Mohanty, R. C. Mohanty, S. S. Mahapatra, J of Adv Manufac Sys 16(04) 357–374 (2017). [CrossRef] [Google Scholar]
- S. Shamsudin, M. A. Lajis, Feasibility study on production of metal matrix composite (MMC) material for electrical discharge machining (EDM) tools using rapid prototyping (RP) technique. In: 8th Int Conf on Mechanical and Manufacturing Engineering (MATEC Web of Conferences) 135, 00011 (2017). [Google Scholar]
- S. K. Padhi, S. S. Mahapatra, R. Padhi, H. C. Das, Adv in Manufac 6(4) 442–456 (2018). [CrossRef] [Google Scholar]
- U. A. Danade, S. D. Londhe, R. M. Metkar, Rapid Prototyping J 25(7) 1224–1231 (2019). [CrossRef] [Google Scholar]
- A. Equbal, M. I. Equbal, A. K. Sood, CIRP J of Manufac Sc & Technol 26, 10–25 (2019). [CrossRef] [Google Scholar]
- A. K. Sahu, S. S. Mahapatra, The Int J of Adv Manufac Technol 106(3) 1017–1041 (2020). [CrossRef] [Google Scholar]
- M. A. Ilani, M. Khoshnevisan, Multiscale and Multidisciplinary Modeling, Exp & Des 3(3) 173–186 (2020). [CrossRef] [Google Scholar]
- S. Klaric, Z. Botak, D. J. Hill, M. Harbidge, R. Murray, Tehnički Glasnik 14(1) 27–31 (2020). [CrossRef] [Google Scholar]
- M. S. N. M. Shaikh, B. B. Ahuja, Mat Tod: Proc 41(4) 874–885 (2021). [CrossRef] [Google Scholar]
- S. Shashank, T. Pinto, C. G. Ramachandra, M. J. Raghavendra, Mat Sc & Engg 1013(1) 012002 (2021). [Google Scholar]
- A. Equbal, A. Equbal, Z. A. Khan, I. A. Badruddin, M. B. A. Bashir, H. Alrobei, Polymers 13(23) 4109 (2021). [CrossRef] [PubMed] [Google Scholar]
- A. Equbal, S. Ahmad, I. A. Badruddin, Z.A. Khan, S. Kamangar, S. Javed, Proceedings of the Institution of Mech Engineers, Part B: J of Engg Manufacture 09544054221151093 (2023). [Google Scholar]
- A. K. Sahu, S.S. Mahapatra, J. Thomas, A.E. Patterson, M. Leite, S. Goel, J of the Brazilian Soc of Mech Scs & Engg 45(9) 470 (2023). [CrossRef] [Google Scholar]
- M. Y. Khan, P. S. Rao, B. S. Pabla, Arch. of Metallur. & Mat. 68(4) 1225–1232 (2023). [Google Scholar]
- M. Y. Khan, P. S. Rao, B. S. Pabla, 3-D printing technology: Inclusive study and applicability in different sectors. In: C. Pandey, V. Goyat, S. Goel, editors, Lecture Notes in Mechanical Engineering-Advances in Materials and Mechanical Engineering, Springer, Singapore 357–366 (2021). [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.