EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 455 (2023) E3S Web Conf., 455 (2023) 03009 References
Open Access
Issue
E3S Web Conf.
Volume 455, 2023
First International Conference on Green Energy, Environmental Engineering and Sustainable Technologies 2023 (ICGEST 2023)
Article Number 03009
Number of page(s) 11
Section Sustainable Technology in Construction
DOI https://doi.org/10.1051/e3sconf/202345503009
Published online 05 December 2023
  1. Pinki Deb and Kh. Lakshman Singh. Mix design, durability and strength enhancement of cold mix asphalt: a state-of-the-art review. Innovative Infrastructure Solutions (2022) 7:61, https://doi.org/10.1007/s41062-021-00600-2 [CrossRef] [Google Scholar]
  2. Needham, D. Developments in bitumen emulsion mixtures for roads. University of Nottingham, Nottingham (1996). [Google Scholar]
  3. Thanaya, I.N.A. Review and recommention of cold asphlat emulsion mixtures CAEMS design. Civil Engineering Dimension, 9 (1), 49–56 (2007). [Google Scholar]
  4. Read, J. and Whiteoak, D. The shell bitumen handbook. Thomas Telford. (2003). [Google Scholar]
  5. MORTH (Ministry of Road Transport and Highways) Specifications for Road and Bridge Works (Fifth Revision) Indian Road Congress New Delhi (2013). [Google Scholar]
  6. H. Wang, I. Al-Qadi, A. Faheem, H. Bahia, S.H. Yang, G. Reinke, Effect of mineral filler characteristics on asphalt mastic and mixture rutting potential, Trans. Res. Rec.: J. Transp. Res. Board 2208, 33–39 (2011). [CrossRef] [Google Scholar]
  7. A.H. Aljassar, S. Metwali, M.A. Ali, Effect of filler types on Marshall stability and retained strength of asphalt concrete effect of filler types on Marshall stability and retained strength of asphalt concrete, Int. J. Pavement Eng. 5 (1) 47–51(2016). [Google Scholar]
  8. Feuerborn, H.-J. Coal ash utilisation over the world and in Europe. Workshop on environmental and health aspects of coal ash utilization, 23rd-24th November, Tel- Aviv, Israel (2005). [Google Scholar]
  9. Dash, S.S., Panda, M. Influence of mix parameters on design of cold bituminous mix. Construct. Build. Mater. 191, 376e385 (2018). https://doi.Org/10.1016/j.conbuildmat.2018.10.002. [CrossRef] [Google Scholar]
  10. Thanaya, I.N.A., Zoorob, S.E., Forth, J.P. A laboratory study on cold-mix, cold-lay emulsion mixtures. Proc. Inst. Civ. Eng. Transp. (2009) https://doi.org/10.1680/tran.2009.162.1.47 [Google Scholar]
  11. Sargin, S., Saltan, M., Morova, N., Serin, S., Terzi, S., Evaluation of rice husk ash as filler in hot mix asphalt concrete, Constr. Build. Mater. 48, 390–397, (2013) [CrossRef] [Google Scholar]
  12. Al-Hdabi, A. Laboratory investigation on the properties of asphalt concrete mixture with Rice Husk Ash as filler, Constr. Build. Mater. 126. 544–551, (2016). [CrossRef] [Google Scholar]
  13. Mistry, R., Karmakar, S., T. Kumar Roy. Experimental evaluation of rice husk ash and fly ash as alternative fillers in hot-mix asphalt, Road Mater. Pavement Des. 112(2018). [Google Scholar]
  14. Arabani, M., Tahami, S.A., Taghipoor, M. Laboratory investigation of hot mix asphalt containing waste materials, Road Mater. Pavement Des. 1–17 (2017) [Google Scholar]
  15. IRC:SP:100, Use of cold mix technology in construction and maintenance of roads using bitumen emulsion, 2014. [Google Scholar]
  16. Thanaya, I.N.A. Improving the performances of cold bituminous emulsion mixture incorporating waste materials. Ph.D thesis. School of civil engineering. The University of Leeds (2003). [Google Scholar]
  17. ASTM D6927-15. Standard test method for marshall stability and flow of asphalt mixtures [Google Scholar]
  18. ASTM D6931-17. Standard test method for Indirect tensile stregth (IDT) of asphalt mixtures. [Google Scholar]
  19. AASHTO T283, Resistance of Compacted Bituminous Mixture to Moisture Induced Damage Standard Specifications for Transportation Materials and Methods of Sampling and Testing. Part II Tests. Washington, DC (2009) [Google Scholar]
  20. AASHTO T324. Standard method of test for Hamburg wheel-track testing of compacted hot mix asphalt (HMA) (2011) [Google Scholar]
  21. Du Shaowen. Effect of curing conditions on properties of cement asphalt mixtures. Construction and building materials 164, 84–93 (2018) https://doi.org/10.1016/j.conbuildmat.2017.12.179 [CrossRef] [Google Scholar]
  22. Jince, P. Zachariah, Partha Pratim Sarkar, Manish Pal. A study on the moisture damage and rutting resistance of polypropylene modified bituminous mixes with crushed brick aggregate wastes. Construction and Building Materials 269, 121357 (2021). https://doi.org/10.1016/j.conbuildmat.2020.121357 [CrossRef] [Google Scholar]
  23. Al-Busaltan, S., Al Nageim, H., Atherton, W., and Sharples, G. Mechanical properties of an upgrading cold-mix asphalt using materials. Journal of Materials in Civil Engineering, 24 (12), 1484–1491(2012). [CrossRef] [Google Scholar]
  24. Arabani, M., and Azarhoosh, A.R. The effect of recycled concrete aggregate and steel slag on the dynamic properties of asphalt mixtures. Construction and Building Materials, 35, 1–7, (2012). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.