EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 576 (2024) E3S Web Conf., 576 (2024) 06009 References
Open Access
Issue
E3S Web Conf.
Volume 576, 2024
The 13th Engineering International Conference “Sustainable Development Through Green Engineering and Technology” (EIC 2024)
Article Number 06009
Number of page(s) 10
Section Sustainable Materials and Green Chemistry
DOI https://doi.org/10.1051/e3sconf/202457606009
Published online 03 October 2024
  1. Z. Song, Z. Wang, Q. Chen, Z. Qi, K.B. Kim, W. Wang, Role of Cr Element in Highly Dense Passivation of Fe-Based Amorphous Alloy, Materials 16, 1–18 (2023) [Google Scholar]
  2. Y. Zhao, Y. Cao, W. Wen, Z. Lu, J. Zhang, Y. Liu, P. Chen, Effects of Mn content on austenite stability and mechanical properties of low Ni alumina-forming austenitic heat-resistant steel: a first-principles study, Sci. Rep. 13, 1–10 (2023) [CrossRef] [Google Scholar]
  3. Z. Wang, B. Fu, Y. Wang, T. Dong, J. Li, G. Li, X. Zhao, J. Liu, G. Zhang, Effect of Cu Content on the Precipitation Behaviors, Mechanical and Corrosion Properties of AsCast Ti-Cu Alloys, Materials 15, 1–16 (2022) [Google Scholar]
  4. S. Wang, G. Meng, M. Song, Effect of Cu Addition on Properties of an Al-La Alloy, Coatings 13, 1–11 (2024) [Google Scholar]
  5. J. Wang, C. Li, X. Di, D. Wang, Effect of Cu Content on Microstructure and Mechanical Properties for High-Strength Deposited Metals Strengthened by Nano-Precipitation, Metals 12, 1–17 (2022) [Google Scholar]
  6. P. Salvetr, A. Gokhman, M. Svoboda, Č. Donik, I. Podstranská, J. Kotous, Z. Nový, Effect of Cu Alloying on Mechanical Properties of Medium-C Steel after Long-Time Tempering at 500 °C, Materials 16, 1–17 (2023) [Google Scholar]
  7. Y.Y. Liu, Z. Chen, J.C. Shi, Z.Y. Wang, J.Y. Zhang, The effect of Al content on microstructures and comprehensive properties in AlxCoCrCuFeNi high entropy alloys, Vacuum 161, 143–149 (2019) [CrossRef] [Google Scholar]
  8. R.D. Desiati, E. Sutiawan, T. Sudiro, B. Hermanto, Structure, Mechanical Properties, And Oxidation Resistance Of Mn-Rich Fe-Mn-Al Alloys, Metalurgi 3, 127–138 (2022) [Google Scholar]
  9. A. Mao, P. Ding, F. Quan, T. Zhang, X. Ran, Y. Li, X. Jin, X. Gu, Effect of aluminum element on microstructure evolution and properties of multicomponent Al-Co-Cr-CuFe-Ni nanoparticles, J. Alloys Compd. 735, 1167–1175 (2018) [CrossRef] [Google Scholar]
  10. Suprianto, C.L. Chen, Study of Cu Effect and In-situ Yttria Dispersoids on Microstructure Evolution of Mechanically Alloyed CoFeNiCrCu High Entropy Alloys, Met. Mater. Int. 29, 420–428 (2022) [Google Scholar]
  11. M. Wang, Q. Yang, Y. Jiang, Z. Li, Z. Xiao, S. Gong, Y. Wang, C. Guo, H. Wei, Effects of Fe content on microstructure and properties of Cu−Fe alloy, Trans. Nonferrous Met. Soc. China 31, 3039–3049 (2021) [CrossRef] [Google Scholar]
  12. C.L. Chen, Y.M. Dong, Effect of mechanical alloying and consolidation process on microstructure and hardness of nanostructured Fe–Cr–Al ODS alloys, Mater. Sci. Eng. A 528, 8374–8380 (2011) [CrossRef] [Google Scholar]
  13. G.J. Shu, C.J. Huang, W.X. Chien, P. Wang, M.W. Wu, The Microstructure of Fe-Based Laminated Metal Composite Produced by Powder Metallurgy, Materials 14, 1–9 (2021) [Google Scholar]
  14. P.A. Loginov, E.N. Avdeenko, A.A. Zaitsev, E.A. Levashov, Structure and properties of powder alloys Fe–(45-15)%Ni–(10-5)%Cu, obtained via mechanical alloying, CIS Iron Steel Rev. 22, 82–87 (2021) [CrossRef] [Google Scholar]
  15. L. Chen, Z. Li, P. Dai, P. Fu, Q. Tang, J. Chen, Microstructure and tensile properties of metastable Fe50Mn30Co10Cr10 high-entropy alloy prepared via powder metallurgy, J. Alloys Compd. 955, 170225 (2023) [CrossRef] [Google Scholar]
  16. H. He, L. Zhang, Z. Liu, W. Zhao, Evolution of intermetallics between solid Fe-Cr/FeNi alloys and molten aluminium, Int. J. Mech. Sci. 257, 108549 (2023) [CrossRef] [Google Scholar]
  17. S.C. Han, D.F. Sanchez, D. Grolimund, S.H. Uhm, D.Y. Choi, H.C. Jeong, T.S. Jun, Role of silicon on formation and growth of intermetallic phases during rapid Fe-Zn alloying reaction, Mater. Today Adv. 18, 100368 (2023) [CrossRef] [Google Scholar]
  18. S. Du, S. Zhang, J. Wang, Z. Lv, Z. Yan, J. Liu, B. Liu, Evolutionary mechanism of the precipitation behavior and organization of iron-containing intermetallic phase during solidification of recycled high-Fe Al-Zn-Mg-Cu melts, J. Alloys Compd. 968, 171836 (2023) [CrossRef] [Google Scholar]
  19. X. Li, D. Zhu, K. Pan, H.H. Wu, Y. Ren, C. Hu, S. Zhao, Exploring interpretable features of hardness for intermetallic compounds prepared by spark plasma sintering, Int. J. Refract. Met. Hard Mater. 117, 106386 (2023) [CrossRef] [Google Scholar]
  20. J. Mathew, G. Remy, M.A. Williams, F. Tang, P. Srirangam, Effect of Fe Intermetallics on Microstructure and Properties of Al-7Si Alloys, Jom 71, 4362 (2019) [CrossRef] [Google Scholar]
  21. A. Noviyanto, S. Harjanto, W.B. Widayatno, A.S. Wismogroho, M.I. Amal, N.T. Rochman, Mechanical Alloying-assisted Coating of Fe–Al Powders on Steel Substrate, Makara J Technol 24, 111–116 (2020) [CrossRef] [Google Scholar]
  22. J. Li, J. Li, Q. Zhao, Y. Chen, J. Chen, Effect of pore design on the mechanical properties of nanoporous high-entropy alloys, Int. J. Refract. Met. Hard Mater. 111, 106089 (2023) [CrossRef] [Google Scholar]
  23. E. Dudrová, M. Kabátová, Fractography Of Sintered Iron And Steels, Powder Metall. Prog. 8, 59–75 (2008) [Google Scholar]
  24. A.N. Wieczorek, D. Myszka, Abrasive Wear Properties Of Fe-Based Alloys Designed For Mining Applications, Arch. Metall. Mater. 62, 1521–1534 (2017) [CrossRef] [Google Scholar]
  25. C. Feng, X. Wang, L. Yang, Y. Guo, Y. Wang, High Hardness and Wear Resistance in AlCrFeNiV High-Entropy Alloy Induced by Dual-Phase Body-Centered Cubic Coupling Effects, Materials 15, 1–12 (2022) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.