Open Access
Issue |
E3S Web Conf.
Volume 582, 2024
1st International Conference on Materials Sciences and Mechatronics for Sustainable Energy and the Environment (MSMS2E 2024)
|
|
---|---|---|
Article Number | 02007 | |
Number of page(s) | 10 | |
Section | Materials Sciences in Energy | |
DOI | https://doi.org/10.1051/e3sconf/202458202007 | |
Published online | 22 October 2024 |
- A. Poursaee, Corrosion of steel bars in saturated Ca(OH)2 and concrete pore solution. Concr. Res. Lett. 1, 90–97 (2010). [Google Scholar]
- L. Bertolini, B. Elsener, P. Pedeferri, E. Redaelli and R. B. Polder, Corrosion of steel in concrete : prevention, diagnosis, repair. (John Wiley & Sons, 2013). [CrossRef] [Google Scholar]
- U.M. Angst, B. Elsener, C. K. Larsen and Ø. Vennesland, Critical chloride content in reinforced concrete–A review. Cem. Concr. Res. 39, 1122–1138 (2009). https://doi.org/10.1016/j.cemconres.2009.08.006 [CrossRef] [Google Scholar]
- S. Mahima, P. V. P. Moorthi, A. Bahurudeen and A. Gopinath, Influence of chloride threshold value in service life prediction of reinforced concrete structures. Sādhanā 43, 115 (2018). https://doi.org/10.1007/s12046-018-0863-5 [Google Scholar]
- B. Šavija and M. Luković, Carbonation of cement paste : Understanding, challenges, and opportunities. Constr. Build. Mater. 117, 285–301 (2016). https://doi.org/10.1016/j.conbuildmat.2016.04.138 [CrossRef] [Google Scholar]
- C. Andrade, and C. Alonso, Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method. Mater. Corros. 55, 537–547 (2004). https://doi.org/10.1007/BF02483292 [Google Scholar]
- K. Tuutti, Corrosion of steel in concrete, CBI Research Report n°4.82, Swedish Cement and Concrete, Research Institute, Stockholm, Sweden, (1982). [Google Scholar]
- C. Andrade and J.A. González, Quantitative measurements of the corrosion rate of reinforcing steels embedded in concrete using polarization resistance measurements. Mater. Corros. 29, 515–519 (1978). https://doi.org/10.1002/maco.19780290804 [CrossRef] [Google Scholar]
- G. K. Glass and N. R. Buenfeld, The influence of chloride binding on the chloride induced corrosion risk in reinforced concrete. Corros. Sci. 42, 329–344 (2000). https://doi.org/10.1016/S0010-938X(99)00083-9 [CrossRef] [Google Scholar]
- C. L. Page and K. W. J. Treadaway, Aspects of the electrochemistry of steel in concrete. Nature, 297, 109–115 (1982). https://doi.org/10.1038/297109a0 [CrossRef] [Google Scholar]
- Y. Liu, R. E. Weyers, Modeling the time to corrosion cracking of the cover concrete in chloride contaminated reinforced concrete structures, Ph.D. thesis, Blacksburg Virginia, (1996). [Google Scholar]
- C. Andrade, P. Merino, X. R. Nóvoa, M. C. Pérez and L. Soler, Passivation of reinforcing steel in concrete. Mater. Sci. Forum. 192, 891–898 (1995). https://doi.org/10.4028/www.scientific.net/MSF.192-194.891 [CrossRef] [Google Scholar]
- A. Poursaee and C. M. Hansson, Reinforcement corrosion in simulated concrete pore solutions. Cem. Concr. Res. 37, 1127–1133 (2007). https://doi.org/10.1016/j.cemconres.2007.04.005 [CrossRef] [Google Scholar]
- R. Rodrigues, S. Gaboreau, J. Gance, I. Ignatiadis and S. Betelu, Reinforced concrete structures : A review of corrosion mechanisms and advances in electrical methods for corrosion monitoring. Constr. Build. Mater. 269, 121240 (2021). https://doi.org/10.1016/j.conbuildmat.2020.121240 [CrossRef] [Google Scholar]
- M. F. Montemor, A. M. Simões and M. G. S. Ferreira, Chloride-induced corrosion on reinforcing steel: from the fundamentals to the monitoring techniques. Cem. Concr. Compos. 25, 491–502 (2003). https://doi.org/10.1016/S0958-9465(02)00089-6 [CrossRef] [Google Scholar]
- J. Monnier, D. Neff, S. Réguer, P. Dillmann, L. Bellot-Gurlet, E. Leroy, E. Foy, L. Legrand, I. Guillot, A corrosion study of the ferrous medieval reinforcement of the Amiens cathedral. Phase characterisation and localisation by various microprobes techniques. Corros. Sci. 52, 695–710 (2010). https://doi.org/10.1016/j.corsci.2009.10.028 [Google Scholar]
- K. Noda, T. Tsuru, S. Haruyama, The impedance characteristics of passive films on iron, Corros. Sci. 31, 673–678, (1990). https://doi.org/10.1016/0010-938X(90)90179-9 [CrossRef] [Google Scholar]
- ASTM International, Standard practice for operating salt spray (fog) apparatus (ASTM B117-19). ASTM International (2023). [Google Scholar]
- S.P Lynch, Progress towards understanding mechanisms of hydrogen embrittlement and stress corrosion cracking. Nace Corrosion, NACE-07493 (2007). [Google Scholar]
- A. Bentur, N. Berke and S. Diamond, Steel corrosion in concrete : fundamentals and civil engineering practice (CRC press, 1997). [CrossRef] [Google Scholar]
- X. Zhang, Y. Zhang, B. Liu, B. Liu, W. Wu and C. Yang, Corrosion-induced spalling of concrete cover and its effects on shear strength of RC beams. Eng. Fail. Anal. 127, 105538 (2021). https://doi.org/10.1016/j.engfailanal.2021.105538 [CrossRef] [Google Scholar]
- S. Ahmad, Reinforcement corrosion in concrete structures, its monitoring and service life prediction––a review. Cem. Concr. Compos. 25, 459–471 (2003). https://doi.org/10.1016/S0958-9465(02)00086-0 [CrossRef] [Google Scholar]
- Y. Liang and L. Wang, Prediction of corrosion-induced cracking of concrete cover: A critical review for thick-walled cylinder models. Ocean Eng. 213, 107688 (2020). https://doi.org/10.1016/j.oceaneng.2020.107688 [CrossRef] [Google Scholar]
- W. Juimo, R. Ngono, D. Fokwa and T. Cherradi, Fissuration dans les ouvrages en béton armé soumis à la corrosion: simulation de la fissuration par éléments finis via le code Cast3M. In CFM 2015-22ème Congrès Français de Mécanique. AFM, Maison de la Mécanique, 39/41 rue Louis Blanc-92400 Courbevoie, August (2015). [Google Scholar]
- A. Jamali, U. Angst, B. Adey and B. Elsener, Modeling of corrosion-induced concrete cover cracking: A critical analysis. Constr. Build. Mater. 42, 225–237 (2013). https://doi.org/10.1016/j.conbuildmat.2013.01.019 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.