EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 483 (2024) E3S Web Conf., 483 (2024) 03019 References
Open Access
Issue
E3S Web Conf.
Volume 483, 2024
The 3rd International Seminar of Science and Technology (ISST 2023)
Article Number 03019
Number of page(s) 14
Section Trends in Mathematics and Computer Science for Sustainable Living
DOI https://doi.org/10.1051/e3sconf/202448303019
Published online 31 January 2024
  1. World Economic Forum, Radically Reducing Plastic Pollution in Indonesia: A Multistakeholder Action Plan. (2020) [Google Scholar]
  2. J. Hopewell, R. Dvorak, E. Kosior, Plastics recycling: Challenges and opportunities. Philos. Trans. R. Soc. B Biol. Sci. 364, 2115 (2009). https://doi.org/10.1098/rstb.2008.0311 [CrossRef] [PubMed] [Google Scholar]
  3. P. Soemadijo, F. Anindita, D. Trisyanti, R. Akib, M. Abdulkadir, N. Nizardo, R. L. Rachmawati, J. Environ. Sci. Sustain. Dev. 5, 436 (2022). https://doi.org/10.7454/jessd.v5i2.1128 [Google Scholar]
  4. A. T. Oladimeji, O. D. Okechukwu, Effect of chemically modified Cissus populnea fibers on mechanical, microstructural and physical properties of Cissus populnea/high density polyethylene composites. Eng. J. 21, 25 (2017). https://doi.org/10.4186/ej.2017.21.2.25 [Google Scholar]
  5. Y. Shi, T. Rabin, C. Mark, C. Tony, J. Mohan, S. A. Robert, “Mechanical Properties Of Recycled Plastic Fibres For Reinforcing Concrete, in Fibre Concrete 2013, Prague, Czech Republic, September 12 -13 (2013). [Google Scholar]
  6. S. U. Handayani, M. Fahrudin, W. Mangestiyono, A. F. Hadi Muhamad, Mechanical Properties of Commercial Recycled Polypropylene from Plastic Waste. J. Vocat. Stud. Appl. Res. 3 1 (2021). https://doi.org/10.14710/jvsar.v3i1.10868 [CrossRef] [Google Scholar]
  7. S. Bertin, J.-J. Robin, C. E. Re, P. Ma, Study and characterization of virgin and recycled LDPE/PP blends. Eur Polym J. 38, 2255 (2002). https://doi.org/10.1016/S0014-3057(02)00111-8 [CrossRef] [Google Scholar]
  8. L. Martins. From plastic waste to frugal products-Mechanical properties evaluation. Master Thesis, Tecnico Lisboa, Portugal (2019) [Google Scholar]
  9. A. Rayside, B. Chowdary, P. Dey, Circular Economy Adoption Within 3d Printing Industry: The State Of The Art, Major Issues And Challenges, in The International Conference on Emerging Trends in Engineering and Technology (IConTech-2020), The University of The West Indies (2020) https://doi.org/10.47412/ezcq1118 [Google Scholar]
  10. E. Soury, A. H. Behravesh, E. Rouhani Esfahani, and A. Zolfaghari, Design, optimization and manufacturing of wood-plastic composite pallet. Mater Des. 30, 4183 (2009). https://doi.org/10.1016/j.matdes.2009.04.035 [CrossRef] [Google Scholar]
  11. N. Thiele. Simulation based evaluation of pallet management simulation based evaluation of pallet management strategies in the context of sustainability strategies in the context of sustainability. Master Thesis, University of Rhode Island, USA (2021) [Google Scholar]
  12. N. Narasimhamurthy. Development of Commercial Applications for Recycled Plastics Using Finite Element Analysis,” Master Thesis, Brigham Young University, USA (2005) [Google Scholar]
  13. H. H. Tsai, Y. L. Liao, Feasibility Study of the Flatness of a Plastic Injection Molded Pallet by a Newly Proposed Sequential Valve Gate System. Polymers 2022, 14, 616 (2022). https://doi.org/10.3390/POLYM14030616 [Google Scholar]
  14. ASTM D-638, Standard Test Method for Tensile Properties of Plastics 1,” (2015). https://doi.org/10.1520/D0638-14 [Google Scholar]
  15. ASTM D-695, Standard Test Method for Compressive Properties of Rigid Plastics 1. (2015). https://doi.org/10.1520/D0695-15 [Google Scholar]
  16. ASTM D-792, Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement 1. (2007). https://doi.org/10.1520/D0792-20 [Google Scholar]
  17. Kinetic Vision, FEA Material Properties Information Resources by Kinetic Vision. https://kinetic-vision.com/capabilities/fea-material-properties/ (accessed Sep. 21, 2023). [Google Scholar]
  18. M. Ashby, Material Property Definitions-a summary. ANSYS. (2021). [Google Scholar]
  19. Team Xometry, Bulk Modulus: Definition, How it Works, Formula, Examples, and Benefits. (2023) https://www.xometry.com/resources/3d-printing/what-is-bulk-modulus/ (accessed Sep. 21, 2023). [Google Scholar]
  20. D. S. Eyinla, M. A. Oladunjoye, A. I. Olayinka, B. B. Bate, Rock physics and geomechanical application in the interpretation of rock property trends for overpressure detection. J Pet Explor Prod Technol. 11, 75 (2020). https://doi.org/10.1007/S13202-020-01039-4/FIGURES/22 [Google Scholar]
  21. Z. Liu, R. Samuel, A. Gonzales, Y. Kang, Modeling and Simulation of Annular Pressure Buildup APB Management Using Syntactic Foam in HP/HT Deepwater Wells, in SPE Deepwater Drilling and Completions Conference, Galveston, Texas, USA, September 14 (2016). https://doi.org/10.2118/180308-MS [Google Scholar]
  22. International Standard Organization, ISO 8611-1: Pallets for materials handling — Flat pallets. (2006) [Google Scholar]
  23. H. Patil, P. V. Jeyakarthikeyan, Mesh convergence study and estimation of discretization error of hub in clutch disc with integration of ANSYS, in 2nd International conference on Advances in Mechanical Engineering (ICAME 2018) 22– Kattankulathur, India, March 24 (2018). https://doi.org/10.1088/1757-899X/402/1/012065 [Google Scholar]
  24. O. Tramis, C. Garnier, C. Yus, S. Irusta, F. Chabert, Enhancement of the fatigue life of recycled PP by incorporation of recycled opaque PET collected from household milk bottle wastes. Waste Manag. 125, 49 (2021). https://doi.org/10.1016/J.WASMAN.2021.02.006 [CrossRef] [PubMed] [Google Scholar]
  25. T. Oladimeji Azeez, Thermoplastic Recycling: Properties, Modifications, and Applications, in Thermosoftening Plastics, IntechOpen, (2020). https://doi.org/10.5772/intechopen.81614 [Google Scholar]
  26. B. I. S. Murat, M. S. Kamalruzaman, M. H. N. Azman, M. F. Misroh, Assessment of Mechanical Properties of Recycled HDPE and LDPE Plastic Wastes, in International Conference on Sustainable Materials (ICoSM 2020, Pahang, Malaysia, March 30 (2020) https://doi.org/10.1088/1757-899X/957/1/012046 [Google Scholar]
  27. L. Gustavo Barbosa, M. Piaia, and G. Henrique Ceni, Analysis of Impact and Tensile Properties of Recycled Polypropylene. Int. J. Mater. Eng. 7, 117 (2017) https://doi.org/10.5923/j.ijme.20170706.03 [CrossRef] [Google Scholar]
  28. Y. Dou and D. Rodrigue, Morphological, thermal and mechanical properties of recycled HDPE foams via rotational molding. J. Cell. Plast. 58, 305 (2022). https://doi.org/10.1177/0021955X211013793 [CrossRef] [Google Scholar]
  29. S. E. Benzley A, K. Merkley, T. D. Blacker, L. Schoof, Pre-and post-processing for the finite element method, Finite Elements in Analysis and Design, 19, 243 (1995). https://doi.org/10.1016/0168-874X(94)00072-N [CrossRef] [Google Scholar]
  30. W. N. Mascarenhas, C. H. Ahrens, and A. Ogliari, Design criteria and safety factors for plastic components design. Mater Des. 25, 257 (2004). https://doi.org/10.1016/j.matdes.2003.10.003 [CrossRef] [Google Scholar]
  31. L. Horvath, How much load can my pallet carry?, (2018). https://www.unitload.vt.edu/education/white-papers/5-wp-load-carrying-capacity-of-pallets.html (Accessed: Sep. 21, 2023) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.