EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 491 (2024) E3S Web Conf., 491 (2024) 01005 References
Open Access
Issue
E3S Web Conf.
Volume 491, 2024
International Conference on Environmental Development Using Computer Science (ICECS’24)
Article Number 01005
Number of page(s) 12
Section Energy Management for Sustainable Environment
DOI https://doi.org/10.1051/e3sconf/202449101005
Published online 21 February 2024
  1. Narasimha Murthy J, Babu Rao,Granulated Blast Furnace Slag: Potential Sustainable Material for Foundry Applications’, Journal of Sustainable Metallurgy, Vol. 10, (2010), pp.1–20. [Google Scholar]
  2. Mahrabi, H, A, M, R, Jolly, K, Salonitis, ‘Methods of Reducing Materials’ Waste and Saving Energy in Investment Casting’, Shape Casting: 6th International Symposium, Vol. 10, (2015) pp. 69-76. [Google Scholar]
  3. R, Brevick, Austin F, Mount-Campbell, Clark A, Mount-Campbell, Alan J, Horn, ‘ Modeling alloy and energy utilization in high volume die casting’ , Clean Technologies and Environmental Policy, Vol. 16, Issue 1, (2014). pp. 201–209. [CrossRef] [Google Scholar]
  4. EskinD, G, V, I, Savran, L, Katgerman, ‘Effects of melt temperature and casting speed on the structure and defect formation during direct-chill casting of an Al-Cu alloy’,Metallurgical and Materials Transactions A, Vol. 36, (2005) pp. 1965–1976,. [CrossRef] [Google Scholar]
  5. Christian W, Schmidt, Kai-Friedrich Karhausen, ‘Productivity Improvements in Industrial Twin-Roll Casting by Heat Loss Analysis Along the Process Chain’, Light Metals (2016), [Google Scholar]
  6. Amit Sata, B, Ravi, ‘Comparison of Some Neural Network and Multivariate Regression for Predicting Mechanical Properties of Investment Casting’, Journal of Materials Engineering and Performance, Vol. 23, Issue 8,(2014), pp. 2953–2964. [CrossRef] [Google Scholar]
  7. Benny Karunakar, D, G, L, Datta, ‘ Prevention of defects in castings using back propagation neural networks’,The International Journal of Advanced Manufacturing Technology, Vol. 39, Issue 11–12,(2008), pp. 1111–1124. [CrossRef] [Google Scholar]
  8. Parappagoudar,M, B, Pandu R, Vundavilli M, B, Parappagoudar, ‘Forward and reverse mappings of the cement-bonded sand mould system using fuzzy logic’ , The International Journal of Advanced Manufacturing Technology, Vol. 61, (2012), pp. 843–854. [CrossRef] [Google Scholar]
  9. Ganesh G, Patil, Dr, K, H, Inamdar, ‘Prediction of Casting Defects Through Artificial Neural Network’, International Journal of Science, Engineering and Technology, Vol 02, (2014),pp. 298-314. [Google Scholar]
  10. Priyank V, Parekh and Dr, J, A, Vadher, ‘Optimization of green sand process parameters by Taguchi method and Artificial Neural Network, Journal of Modern Engineering, Research, Vol. 5, (2015),pp. 6-12. [Google Scholar]
  11. Paul De Garmo, E, J,T, Black, Ronald A, Kohser, “Materials and Processes in Manufacturing”, Technology & Engineering (2003). [Google Scholar]
  12. Farzaneh F, M, L, S, Kokhan, ‘Determination of the hardness and the mechanical properties of steel during melting, secondary refining, and continuous casting in an arc-furnace shop’, Russian metallurgy, Vol. 2, (2016), pp. 1203–1206. [Google Scholar]
  13. NoorulHaq, A, S, Guharaja, K, M, Karuppannan, ‘Parameter optimization of CO2 casting process by using Taguchi method’, International Journal on Interactive Design and Manufacturing (IJIDeM), February Vol. 3, (2009), pp. 41–50. [CrossRef] [Google Scholar]
  14. SaliuOjo Seidu, Bolarinwa Johnson Kutelu, ‘Effects of Additives on Some Selected Properties of Base Sand’, Journal of Minerals and Materials Characterization and Engineering, volume 2, (2014), 507-512. [CrossRef] [Google Scholar]
  15. CharnnarongSaikaew, SermsakWiengwiset, “Optimization of molding sand composition for quality improvement of iron castings” Applied Clay Science,(2012). [Google Scholar]
  16. HimanshuKhandelwal, B, Ravi,’ Effect of molding parameters on chemically bonded sandmold properties ‘, journal of manufacturing process, vol. 22,(2016)pp. 127–133. [CrossRef] [Google Scholar]
  17. Bose narayanasamy, Palanikumardhanabalan, prediction of surface roughness from the magnified digital images of titanium alloy(gr5) in Grinding: a Machine Vision Approach, Tierärztliche Praxis ISSN: 0303-6286 Vol. 40, (2020). [Google Scholar]
  18. John O, OJI, Pamtoks H, Sunday, Omolayo M, Petinrin, Adelana R, Adetunji, ‘Taguchi Optimization of Process Parameters on the Hardness and Impact Energy of Aluminium Alloy Sand Castings’, Leonardo Journal of Sciences, Vol.3, pp. 1-12 (2013). [Google Scholar]
  19. MekonnenLibenNekere, Ajit Pal Singh, “Optimization of aluminium blanks sand casting for process by using Taguchi Robust Design Method”, International Journal for Quality research Vol. 6, No. 1, (2012), pp. 81-97. [Google Scholar]
  20. Guharaja, S, A, NoorulHaq, K, M, Karuppannan, ‘Optimization of green sand casting process parameters by using Taguchi’s method’, International Journal of Advanced Manufacturing Technology, vol. 3, (2006), 30: pp. 1040–1048. [CrossRef] [Google Scholar]
  21. Vijayakumar, S., Anitha, S., Arivazhagan, R., Hailu, A. D., Rao, T. V. J., & Pydi, H. P. (2022). Wear investigation of aluminum alloy surface layers fabricated through friction stir welding method. Advances in Materials Science and Engineering, 2022, 1–8. [Google Scholar]
  22. Vijayakumar, S., Manickam, S., Seetharaman, S., Rao, T. V. J., Pounraj, D., & Pydi, H. P. (2022). Examination of friction stir-welded AA 6262/5456 joints through the optimization technique. Advances in Materials Science and Engineering, 2022, 1–11. [Google Scholar]
  23. Meshach W.T., Hemajothi S., Anita E.A.M. ,(2021),”Real-time facial expression recognition for affect identification using multi-dimensional SVM”,Journal of Ambient Intelligence and Humanized Computing,Vol.12,no.6,pp.6365. 6&partnerID=40&md5=f26fcc07673abde54939bae377bb22f2 [Google Scholar]
  24. Latha A.A., Anbuchezhiyan M., Kanakam C.C., Selvarani K., (2017),”Synthesis and characterization of γ-glycine - A nonlinear optical single crystal for optoelectronic and photonic applications”,Materials Science- Poland,Vol.35,no.1,pp.150.doi:https://www.scopus.com/inward/record.uri?eid=2-s2.0-85019152619 [Google Scholar]
  25. Mr. Dharmesh Dhabliya. (2012). Intelligent Banal type INS based Wassily chair (INSW). International Journal of New Practices in Management and Engineering, 1(01), 01 -08. Retrieved from http://ijnpme.org/index.php/IJNPME/article/view/2 [CrossRef] [Google Scholar]
  26. Ms. Madhuri Zambre. (2012). Performance Analysis of Positive Lift LUO Converter . International Journal of New Practices in Management and Engineering, 1(01), 09 -14. Retrieved from http://ijnpme.org/index.php/IJNPME/article/view/3 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.