EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 491 (2024) E3S Web Conf., 491 (2024) 01016 References
Open Access
Issue
E3S Web Conf.
Volume 491, 2024
International Conference on Environmental Development Using Computer Science (ICECS’24)
Article Number 01016
Number of page(s) 9
Section Energy Management for Sustainable Environment
DOI https://doi.org/10.1051/e3sconf/202449101016
Published online 21 February 2024
  1. J R Murray, J N Tullberg and B B Basnet, “Planters and their Components, (Types, attributes, functional requirements, classification and description)”, School of Agronomy and Horticulture, University of Queensland, Australia. [Google Scholar]
  2. Kyada, A. R., Patel D. B., “Design And Development Of Manually Operated Seed Planter Machine”, (AIMTDR 2014) December 12th–14th, 2014, IIT Guwahati, Assam, India. [Google Scholar]
  3. B. Mursec, P. Vindis, M. Janzekovic, F. Cus, M. Brus, (2008)“Testing of quality of sowing by pneumatic sowing machines”, Journal of Achievements in Materials and Manufacturing Engineering, volume 26, issue 1January 2008. [Google Scholar]
  4. Ronald J. Esdaile, Prof. Richard Bell, Mr Israil Hossain, Mr Enamul Haque, Mr Pao Sinath and Mr Leigh Vial,(2009) “Development of conservation farming implements for two-wheel tractors (power tillers) in Cambodia”, Lao PDR and Bangladesh Australian centre for international agricultural research, September 2009. [Google Scholar]
  5. P. Vijay, K.V.N. Rakesh, B. Varun, (2013)“Design of a Multi-Purpose Seed Sower Cum Plougher”, International Journal of Emerging Technology and Advanced Engineering, Volume 3, Issue 4, April 2013. [Google Scholar]
  6. Book By Robert D Walters “Department of Soil Science”, North Carolina State University, soil draft and traction. [Google Scholar]
  7. Gugulothu, B., Bharadwaja, K., Vijayakumar, S., Rao, T. V. J., Sri, M. N. S., Anusha, P., & Agrawal, M. K. (2023). Modeling and parametric optimization of electrical discharge machining on casted composite using central composite design. International Journal on Interactive Design and Manufacturing (IJIDeM). https://doi.org/10.1007/s12008-023-01323-7 [Google Scholar]
  8. Anusha, P., Sri, M. N. S., Vijayakumar, S., Rao, T. V. J., Paramasivam, P., Jeyakrishnan, S., & Saxena, K. K. (2023). Design and optimization the wear characteristics for Al7178/TiO2/B4C/FA central hybrid composite. International Journal on Interactive Design and Manufacturing (IJIDeM). https://doi.org/10.1007/s12008-023-01341-5 [Google Scholar]
  9. Vijayakumar, S., Arunkumar, A., Pradeep, A., Satishkumar, P., Singh, B., Rama Raju, K. S., & Sharma, V. K. (2023). Optimization of process variables for shielded metal arc welding dissimilar mild steel and medium carbon steel joints. Journal of Adhesion Science and Technology, 1–18. https://doi.org/10.1080/01694243.2023.2227461 [Google Scholar]
  10. Sharma, P., Paramasivam, P., Bora, B. J., & Sivasundar, V. (2023). Application of nanomaterials for emission reduction from diesel engines powered with waste cooking oil biodiesel. International Journal of Low-Carbon Technologies, 18, 795–801. https://doi.org/10.1093/ijlct/ctad060. [CrossRef] [Google Scholar]
  11. Vijayakumar, S., Satheesh Kumar, P. S., Sampath kumar, P., Manickam, S., Ramaiah, G. B., & Pydi, H. P. (2022). The Effect of Stir-Squeeze Casting Process Parameters on Mechanical Property and Density of Aluminum Matrix Composite. In M. A. Khan (Ed.), Advances in Materials Science and Engineering (Vol. 2022, pp. 1–10). Hindawi Limited. [Google Scholar]
  12. Pradeep, A., Kavitha, N., Janardhana Rao, T. V., & Vijayakumar, S. (2022). Influence of nano alumina/vegetable oil based cutting fluid on MQL turning of stainless steel 304. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.06.547 [Google Scholar]
  13. Pal, D., Vijayakumar, S., Rao, T. V. J., & Babu, R. S. R. (2022). “An examination of the tensile strength, hardness and SEM analysis of Al 5456 alloy by addition of different percentage of SiC/flyash”,Materials Today: Proceedings. [Google Scholar]
  14. Paramasivam, P., & Vijayakumar, S. (2021). “Mechanical characterization of aluminium alloy 6063 using destructive and non-destructive testing”, Materials Today: Proceedings. [Google Scholar]
  15. MekonnenLibenNekere, Ajit Pal Singh, “Optimization of aluminium blanks sand casting for process by using Taguchi Robust Design Method”, International Journal for Quality research Vol. 6, No. 1, (2012), pp. 81–97. [Google Scholar]
  16. Guharaja, S, A, NoorulHaq, K, M, Karuppannan, ‘Optimization of green sand casting process parameters by using Taguchi’s method’, International Journal of Advanced Manufacturing Technology, vol. 3, (2006), 30: pp. 1040–1048. [Google Scholar]
  17. Vijayakumar, S., Anitha, S., Arivazhagan, R., Hailu, A. D., Rao, T. V. J., & Pydi, H. P. (2022). Wear investigation of aluminum alloy surface layers fabricated through friction stir welding method. Advances in Materials Science and Engineering, 2022, 1–8. [CrossRef] [Google Scholar]
  18. Sheeba Rani S., Kamatchi Sundari V., Subha Hency Jose P., Sivaranjani S., Stalin B., Pritima D.,(2020),"Enrichment of material subtraction rate on Eglin steel using electrical discharge machining process through modification of electrical circuits",Materials Today: Proceedings,Vol.33,pp.4430 [Google Scholar]
  19. Dhaya R., Ujwal U.J., Sharma T., Singh P., Kanthavel R., Selvan S., Krah D.,(2022),"Energy-Efficient Resource Allocation and Migration in Private Cloud Data Centre",Wireless Communications and Mobile Computing,Vol.2022. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85126998057 [Google Scholar]
  20. Mr. Ather Parvez Abdul Khalil. (2012). Healthcare System through Wireless Body Area Networks (WBAN) using Telosb Motes. International Journal of New Practices in Management and Engineering, 1(02), 01–07. Retrieved from http://ijnpme.org/index.php/IJNPME/article/view/4 [Google Scholar]
  21. Ms. Ritika Dhabalia, Ms. Kritika Dhabalia. (2012). An Intelligent Auto-Tracking Vehicle. International Journal of New Practices in Management and Engineering, 1(02), 08–13. Retrieved from http://ijnpme.org/index.php/IJNPME/article/view/5 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.