EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 491 (2024) E3S Web Conf., 491 (2024) 04015 References
Open Access
Issue
E3S Web Conf.
Volume 491, 2024
International Conference on Environmental Development Using Computer Science (ICECS’24)
Article Number 04015
Number of page(s) 9
Section Engineering for Environment Development Applications
DOI https://doi.org/10.1051/e3sconf/202449104015
Published online 21 February 2024
  1. Paramasivam, P., & Vijayakumar, S. (2021). “Mechanical characterization of aluminium alloy 6063 using destructive and non-destructive testing”, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.04.312 [Google Scholar]
  2. Gugulothu, B., Satheesh Kumar, P. S., Srinivas, B., Ramakrishna, A., & Vijayakumar, S. (2021). “Investigating the material removal rate parameters in ECM for Al 5086 alloy-reinforced silicon carbide/flyash hybrid composites by using Minitab-18”, Advances in Materials Science and Engineering, 2021, 1–6. https://doi.org/10.1155/2021/2079811 [Google Scholar]
  3. Gugulothu, B., Sankar, S. L., Vijayakumar, S., Prasad, A. S. V., Thangaraj, M., Venkatachalapathy, M., & Rao, T. V. J. (2022). “Analysis of wear behaviour of AA5052 alloy composites by addition alumina with zirconium dioxide using the Taguchi-grey relational method”,Advances in Materials Science and Engineering, 2022, 1–7. https://doi.org/10.1155/2022/4545531 [Google Scholar]
  4. Gugulothu, B., Nagarajan, N., Pradeep, A., Saravanan, G., Vijayakumar, S., & Rao, J. (2022). “Analysis of mechanical properties for Al-MMC fabricated through an optimized stir casting process”, Journal of Nanomaterials, 2022, 1–7. https://doi.org/10.1155/2022/2081189 [Google Scholar]
  5. Prakash Pasupulla, A., Abebe Agisho, H., Seetharaman, S., & Vijayakumar, S. (2022). “Characterization and analysis of TIG welded stainless steel 304 alloy plates using radiography and destructive testing techniques”, Materials Today: Proceedings, 51, 935–938. https://doi.org/10.1016/j.matpr.2021.06.305 [CrossRef] [Google Scholar]
  6. Pydi, H. P., Pasupulla, A. P., Vijayakumar, S., & Agisho, H. A. (2022). “Study on microstructure, behavior and Al₂O3 content flux A-TIG weldment of SS-316L steel”, Materials Today: Proceedings, 51, 728–734. https://doi.org/10.1016/j.matpr.2021.06.218 [CrossRef] [Google Scholar]
  7. Vijayakumar, S., Anitha, S., Arivazhagan, R., Hailu, A. D., Rao, T. V. J., & Pydi, H. P. (2022). Wear investigation of aluminum alloy surface layers fabricated through friction stir welding method. Advances in Materials Science and Engineering, 2022, 1–8. https://doi.org/10.1155/2022/4120145 [Google Scholar]
  8. Gugulothu, B., Anusha, P., Swapna Sri, M. N., Vijayakumar, S., Periyasamy, R., & Seetharaman, S. (2022). Optimization of stir-squeeze casting parameters to analyze the mechanical properties of Al7475/B4C/Al2O3/TiB2 hybrid composites by the Taguchi method. Advances in Materials Science and Engineering, 2022, 1–9. https://doi.org/10.1155/2022/3180442 [Google Scholar]
  9. Vijayakumar, S., Manickam, S., Seetharaman, S., Rao, T. V. J., Pounraj, D., & Pydi, H. P. (2022). Examination of friction stir-welded AA 6262/5456 joints through the optimization technique. Advances in Materials Science and Engineering, 2022, 1–11. https://doi.org/10.1155/2022/4527595 [Google Scholar]
  10. Vijayakumar, S., Satheesh Kumar, P. S., Sampath kumar, P., Manickam, S., Ramaiah, G. B., & Pydi, H. P. (2022). The Effect of Stir-Squeeze Casting Process Parameters on Mechanical Property and Density of Aluminum Matrix Composite. In M. A. Khan (Ed.), Advances in Materials Science and Engineering (Vol. 2022, pp. 1–10). Hindawi Limited. https://doi.org/10.1155/2022/3741718 [CrossRef] [Google Scholar]
  11. K. Kumar, Satish V. Kailas & T. S. Srivatsan (2008): Influence of Tool Geometry in Friction Stir Welding, Materials and Manufacturing Processes, 23:2, 188-194 http://dx.doi.org/10.1080/10426910701774734 [CrossRef] [Google Scholar]
  12. S.Ugendera, A.Kumar b, A. Somi Reddy (2014): Microstructure and Mechanical Properties of AZ31B Magnesium alloy by Friction stir Welding, Procedia Materials Science 6 (2014) 1600 –1609 [CrossRef] [Google Scholar]
  13. G. Padmanaban, V. Balasubramanian Selection of FSW tool pin profile, shoulder diameter and material for joining AZ31B magnesium alloy – An experimental approach(2008) Materials and Design 30 (2009) 2647–2656 [Google Scholar]
  14. Dhanesh G mohan S Gopi (2007): influence of induction heat of friction stir weldingon corrsive behavior mechanical and microstructure of different metals Indian journal 203-208 [Google Scholar]
  15. S. Malarvizhi, V. Balasubramanian 2012: Influences of tool shoulder diameter to plate thickness ratio (D/T) on stir zone formation and tensile properties of friction stir welded dissimilar joints of AA6061 aluminum–AZ31B magnesium alloys Material and design 2012 453-460 [Google Scholar]
  16. B Mansoor, A Dorbance G Ayouh A Imad (2015):friction stir welding of AZ31B Mg alloy with Al 6061-T6 Influence of processing parametres of micro structutre and mechanical properties,Minerals,Metals,&Materails society 259-266 [Google Scholar]
  17. A.A.McLean, G.L.F.Powell, I.H.Brownand V.M.Linton Frictionstirwelding of magnesium alloy AZ31B to aluminiumalloy5083 (2003) Minerals,Metals,&Materails society, ScienceandTechnologyofWeldingandJoining 462-464 DOI10.1179/136217103225009134 [Google Scholar]
  18. Kulwant Singh (2018): A Review on Magensium & its alloys,Journal of magnesium &alloys 2018 1-18 [Google Scholar]
  19. Bo Zheng, Xinbin Hu, Qingquan Lv, Li Zhao, Da Cai, Shijie Dong: (2019)Study of self-reaction assisted friction stir welding of AZ31B Mg/5052 Al alloys material letters 2019 doi: https://doi.org/10.1016/j.matlet.2019.127138 [Google Scholar]
  20. Dejia Liu *, Yanchuan Tang, Mingxue Shen, Yong Hu and Longzhi Zhao”Analysis of Weak Zones in Friction Stir Welded Magnesium Alloys from the Viewpoint of Local Texture: A Short Review Metals 2018, 8, 970; doi:10.3390/met8110970 [Google Scholar]
  21. X. Cao, M. Jahazi : Effect of welding speed on the quality of friction stir welded butt joint of Mg alloy Materials and Design 30 (2009) 2033–2042 [Google Scholar]
  22. R.S. Mishraa, Z.Y. Mab: Friction stir welding and processing Materials Science and Engineering R 50 (2005) 1–78. [CrossRef] [Google Scholar]
  23. Bhojak, V., Jain, J. K., Saxena, K. K., Singh, B., & Mohammed, K. A. (2023). Friction stir process: A comprehensive review on material and methodology. Indian Journal of Engineering & Materials Sciences, 30(01), 45–64. https://doi.org/10.56042/ijems.v1i1.61877 [Google Scholar]
  24. Gugulothu, B., Bharadwaja, K., Vijayakumar, S., Rao, T. V. J., Sri, M. N. S., Anusha, P., & Agrawal, M. K. (2023). Modeling and parametric optimization of electrical discharge machining on casted composite using central composite design. International Journal on Interactive Design and Manufacturing (IJIDeM). https://doi.org/10.1007/s12008-023-01323-7 [Google Scholar]
  25. Anusha, P., Sri, M. N. S., Vijayakumar, S., Rao, T. V. J., Paramasivam, P., Jeyakrishnan, S., & Saxena, K. K. (2023). Design and optimization the wear characteristics for Al7178/TiO2/B4C/FA central hybrid composite. International Journal on Interactive Design and Manufacturing (IJIDeM). https://doi.org/10.1007/s12008-023-01341-5 [Google Scholar]
  26. Vijayakumar, S., Arunkumar, A., Pradeep, A., Satishkumar, P., Singh, B., Rama Raju, K. S., & Sharma, V. K. (2023). Optimization of process variables for shielded metal arc welding dissimilar mild steel and medium carbon steel joints. Journal of Adhesion Science and Technology, 1–18. https://doi.org/10.1080/01694243.2023.2227461 [Google Scholar]
  27. Sharma, P., Paramasivam, P., Bora, B. J., & Sivasundar, V. (2023). Application of nanomaterials for emission reduction from diesel engines powered with waste cooking oil biodiesel. International Journal of Low-Carbon Technologies, 18, 795–801. https://doi.org/10.1093/ijlct/ctad060 [CrossRef] [Google Scholar]
  28. Ashok V., Geetha N.B., Rajkumar S., Pauline T., (2022),”Experimental Investigations for Thermal Energy Management by Encapsulation of Nano –Enhanced Bio Phase Change Material in buildings”,Energy Sources, Part A: Recovery, Utilization and Environmental Effects,Vol.44,no.2,pp.4183 [Google Scholar]
  29. Sunder Selwyn T., Hemalatha S., (2020),”Experimental analysis of mechanical vibration in 225kW wind turbine gear box”,Materials Today: Proceedings,Vol.46,pp.3296. doi:https://www.scopus.com/inward/record.uri?eid=2-s2.0-85112702490 [Google Scholar]
  30. Mr. Rahul Sharma. (2015). Recognition of Anthracnose Injuries on Apple Surfaces using YOLOV 3-Dense. International Journal of New Practices in Management and Engineering, 4(02), 08 –14. Retrieved from http://ijnpme.org/index.php/IJNPME/article/view/36 [CrossRef] [Google Scholar]
  31. Ms. Mohini Dadhe, Ms. Sneha Miskin. (2015). Optimized Wireless Stethoscope Using Butterworth Filter. International Journal of New Practices in Management and Engineering, 4(03), 01 –05. Retrieved from http://ijnpme.org/index.php/IJNPME/article/view/37 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.