EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 493 (2024) E3S Web Conf., 493 (2024) 01025 References
Open Access
Issue
E3S Web Conf.
Volume 493, 2024
International Conference on Advances in Agrobusiness and Biotechnology Research (ABR 2024)
Article Number 01025
Number of page(s) 6
DOI https://doi.org/10.1051/e3sconf/202449301025
Published online 22 February 2024
  1. Belousov, S. V. Explanation of the angle of sharpening of a plough cutting working body / S. V. Belousov, E. A. Saprykin, I. S. Karmazin // E3S Web of Conferences, Sevastopol, 09–13 of September 2019. Vol. 126. – Sevastopol: EDP Sciences, 2019. – P. 00025. – DOI 10.1051/e3sconf/201912600025. – EDN OCJGFB. [Google Scholar]
  2. Belousov, S. V. On the problem of interaction of the tillage working body with the soil / S. V. Belousov, E. E. Samurganov // E3S Web of Conferences, Sevastopol, 07–11 of September 2020. – Sevastopol, 2020. – P. 01062. – DOI 10.1051/e3sconf/202019301062. – EDN HHVTAF. [Google Scholar]
  3. Parkhomenko, G. G. Qualitative Indexes of a Plane Cutter for Shallow Tillage with Optimized Parameters / G. G. Parkhomenko, O. S. Babenko, S. I. Kambulov [et al.] // E3S Web of Conferences, Krasnodar, 30–31 of May 2023 / Kuban State Agrarian University. Vol. 398. – Krasnodar: EDP Sciences, 2023. – P. 01030. – DOI 10.1051/e3sconf/202339801030. – EDN JHKJLU. [Google Scholar]
  4. Belousov, S. V. Energy Assessment of Tillage Working Bodies / I. V. Bozhko, S. I. Kambulov, G. G. Parkhomenko, S. V. Belousov // AIP Conference Proceedings : INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT 2021, Sevastopol, 06–10 сентября 2021 года. Vol. 2503. – Sevastopol: American Institute of Physics Inc., 2022. – P. 030044. – DOI 10.1063/5.0099966. – EDN HLWYHS. [Google Scholar]
  5. Parkhomenko S.G., Parkhomenko G.G. Method of structural modeling of automatic control systems of operational modes of tillage units // Proceedings of GOSNITI. 2017. Vol. 126. pp. 55-61. [Google Scholar]
  6. B. Talamini, Y. Mao, L. Anand, Progressive damage and rupture in polymers, Journal of the Mechanics and Physics of Solids, 111, 434-457 (2018) https://doi.org/10.1016/j.jmps.2017.11.013 [CrossRef] [Google Scholar]
  7. Pakhomov, V. I. The Results of Studying Agronomic Indicators of the Demetra Selection Seeder / V. I. Pakhomov, S. I. Kambulov, I. V. Bozhko, G. G. Parkhomenko // Engineering Technologies and Systems. – 2022. – C.90–109. (DOI 10.15507/26584123.032.202201.090-109). [CrossRef] [Google Scholar]
  8. Rykov, V.B. Replaceable crawler engine and its interaction with the sup-porting base / V.B. Rykov, S.I. Kambulov // Achievements of science and technol-ogy of the agroindustrial complex. – № 9. – 2005. – P. 29-30. [Google Scholar]
  9. Rykov, V.B. Development of efficient mobile technological units for conditions of the South of Russia / V.B. Rykov, S.I. Kambulov, Е.I. Trubilin, N.V. Shevchenko. – Krasnodar: KubSAU, 2019. – 265 p. [Google Scholar]
  10. V. Telichenko, A. Ter-Martirosyan, V. Sidorov, The rate of the pile settlement in clay soil with regard to its viscoelastic and elastic-plastic properties, Procedia Engineering, 165, 1359-1366 (2016) https://doi:10.1016/j.proeng.2016.11.865 [CrossRef] [Google Scholar]
  11. P. Panagos, P. Borrelli, J. Poesen, C. Ballabio, E. Lugato, K. Meusburger, L. Montanarella, C. Alewel, Environmental Science & Policy 54, 438-447 (2015) https://doi.10.1016/j.envsci.2015.08.012 [CrossRef] [Google Scholar]
  12. A. Chappell, N. Webb, Aeolian Research 23, 63–78 (2016) https://doi.org/10.1016/j.aeolia.2016.09.006 [Google Scholar]
  13. I. Katra, A. Gross, N. Swet, S. Tanner, H. Krasnov, A. Angert, Sci. Rep. 6, 24736 (2016) https://doi.org/10.1038/srep24736 [CrossRef] [Google Scholar]
  14. K. Adhikari, A.E. Hartemink, Geoderma 262, 101-111 (2016) https://doi.org/10.1016/j.geoderma.2015.08.009 [Google Scholar]
  15. V. Couvreur, J. Vanderborght, X. Draye, M. Javaux, Water Resources Research 50(11), 8891-8906 (2014) https://doi.org/10.1002/2014WR015608 [CrossRef] [Google Scholar]
  16. Z. Sándor; M. Tállai; I. Kincses; Z. László; J. Kátai; I. Vágó, DRC Sustainable Future 1(1), 14-20 ) https://doi.org/10.37281/DRCSF/1.1.3 [Google Scholar]
  17. G.F. Botta, D.L. Antille, F. Bienvenido, D. Rivero, E.E. Contessotto, Engineer-ing for Rural Development. Jelgava, 22, 174-178 (2019) https://doi.org/10.22616/ERDev2019.18.N216 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.