EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 505 (2024) E3S Web Conf., 505 (2024) 01020 References
Open Access
Issue
E3S Web Conf.
Volume 505, 2024
3rd International Conference on Applied Research and Engineering (ICARAE2023)
Article Number 01020
Number of page(s) 9
Section Materials Science
DOI https://doi.org/10.1051/e3sconf/202450501020
Published online 25 March 2024
  1. Azushima, A., Kopp, R., Korhonen, A., et al. Severe plastic deformation (SPD) processes for metals. CIRP Ann - Manuf technol. 2008;57:716–735. [CrossRef] [Google Scholar]
  2. Wang, S., Liang, W., Wang, Y., et al. A modified die for equal channel angular pressing. J Mater Process technol. 2009; [Google Scholar]
  3. Yue, L., Jayapal, M., Cheng, X., et al. Highly dispersed ultra-small nano Sn-SnSb nanoparticles anchored on Ndoped graphene sheets as high performance anode for sodium ion batteries. Appl Surf Sci. 2020;512:145686. [CrossRef] [Google Scholar]
  4. Samyal, R., Bagha, A.K., Bedi, R., et al. Predicting the effect of fiber orientations and boundary conditions on the optimal placement of PZt sensor on the composite structures. Mater Res Express. 2021;8. [Google Scholar]
  5. Arora, G.S., Gupta, A., & Saxena, K.K. (2024). Evaluation of mechanical, microstructural, tribological characteristics and cytocompatibility in AZ31 hybrid bio-composite reinforced with tiO2-HAp. Results in Surfaces and Interfaces, 14, 100174. [CrossRef] [Google Scholar]
  6. Saxena, K.K., Awasthi, A. Novel Additive Manufacturing Processes and techniques in Industry 4.0. 2020. [Google Scholar]
  7. Gupta, T.K., Budarapu, P.R., Chappidi, S.R., Yb, S.S., Paggi, M., & Bordas, S.P. (2019). Advances in carbon based nanomaterials for bio-medical applications. Current Medicinal Chemistry, 26(38), 6851–6877. [CrossRef] [PubMed] [Google Scholar]
  8. Yadav, S., Yamasani, P., Kumar, S. Experimental studies on a micro power generator using thermo-electric modules mounted on a micro-combustor. Energy Convers Manag. 2015;99:1–7. [CrossRef] [Google Scholar]
  9. Elhefnawey, M., Shuai, G.L., Li, Z., et al. On achieving superior strength for Al-Mg-Zn alloy adopting cold ECAP. Vacuum. 2020;174. [Google Scholar]
  10. Awasthi, A., Saxena, K.K. Evaluation of mechanical properties of orange peel reinforced epoxy composite. Mater today Proc. 2019. p. 3821–3826. [CrossRef] [Google Scholar]
  11. Chaudhary, N., Dikshit, M.K., Kumar, C.L., Sonia, P., Pathak, V.K., Saxena, K.K., … & Salmaan, N.U. (2023). Sustainable mechanical properties evaluation for graphene reinforced Epoxy/Kevlar fiber using MD simulations. Journal of Experimental Nanoscience, 18(1), 2246662. [CrossRef] [Google Scholar]
  12. Quinn, C.J., Grundy, P.J., Mellors, N.J. The structural and magnetic properties of rapidly solidified Fe 100-xGax alloys, for 12.8≤x≤27.5. J Magn Magn Mater. 2014;361:74–80. [CrossRef] [Google Scholar]
  13. Sames, W.J., List, F.A., Pannala, S., et al. The metallurgy and processing science of metal additive manufacturing. InT. Mater. Rev. 2016. [Google Scholar]
  14. Jaffery, H.A., Sabri, M.F.M., Said, S.M., et al. Electrochemical corrosion behavior of Sn-0.7Cu solder alloy with the addition of bismuth and iron. J Alloys Compd. 2019;810:151925. [CrossRef] [Google Scholar]
  15. Chandrappa, V., Basavapoornima, C., Kesavulu, C.R., Babu, A.M., Depuru, S.R., & Jayasankar, C.K. (2022). Spectral studies of Dy3+: zincphosphate glasses for white light source emission applications: a comparative study. Journal of Non-Crystalline Solids, 583, 121466. [CrossRef] [Google Scholar]
  16. Kumar, P.S.S., Allamraju, K.V. A Review Of Natural Fiber Composites [Jute, Sisal, Kenaf]. Mater today Proc. 2019;18:2556–2562. [Google Scholar]
  17. Kodli, B.K., Karre, R., Saxena, K.K., et al. Flow behaviour of tiHy 600 alloy under hot deformation using gleeble 3800. Adv Mater Process technol. 2017; [Google Scholar]
  18. Naizabekov, A.B., Andreyachshenko, V.A., Kocich, R. Study of deformation behavior, structure and mechanical properties of the AlSiMnFe alloy during ECAP-PBP. Micron. 2013; [Google Scholar]
  19. Kadiyan S., Dehiya B.S., Pawan R.K.G., et al. A Statistical Method to Predict the Hardness and Grain Size After Equal Channel Angular Pressing of AA-6063 with Intermediate Annealing. Arab J Sci Eng [Internet]. 2020; Available from: https://doi.org/10.1007/s13369-020-04999-1. [Google Scholar]
  20. Atchudan, R., Jebakumar Immanuel Edison, T.N., Shanmugam, M., et al. Sustainable synthesis of carbon quantum dots from banana peel waste using hydrothermal process for in vivo bioimaging. Phys E Low-dimensional Syst Nanostructures. 2021;126:114417. [CrossRef] [Google Scholar]
  21. Singh, P., Singh, A.K., Arun, V., & Dixit, H.K. (2016). Design and analysis of all-optical half-adder, halfsubtractor and 4-bit decoder based on SOA-MZI configuration. Optical and Quantum Electronics, 48, 1–14. [CrossRef] [Google Scholar]
  22. Anugu A.R., Reddy N.V.T., Venkateswarlu, D. Theoritical modelling and finite element analysis of automobile piston. Mater today Proc. 2021;45:1799–1803. [CrossRef] [Google Scholar]
  23. Kalpana G., Kumar P. V., Aljawarneh, S., et al. Shifted Adaption Homomorphism Encryption for Mobile and Cloud Learning. Comput Electr Eng. 2018;65:178–195. [Google Scholar]
  24. Poul Raj I.L., Valanarasu S., Hariprasad K., et al. Enhancement of optoelectronic parameters of Nd-doped ZnO nanowires for photodetector applications. Opt Mater (Amst). 2020;109:110396. [CrossRef] [Google Scholar]
  25. Patil, B.V., Chakkingal, U., Prasanna Kumar, T.S. Effect of geometric parameters on strain, strain inhomogeneity and peak pressure in equal channel angular pressing - A study based on 3D finite element analysis. J Manuf Process. 2015; [Google Scholar]
  26. Pandya, D.J., Pandian, P.M., Kumar, I., Parmar, A., Singh, N., Abd Al-saheb, A.J., & Arun, V. (2023). Supercapacitors: Review of materials and fabrication methods. Materials today: Proceedings. [Google Scholar]
  27. Singh, L., Yahya, M.M., Singh, B., Sehgal, S., Saxena, K.K., & Mohammed, K.A. (2023). Investigation of the Effects of Overlapping Passes on Friction Stir Processed Aluminum Alloy 5083. Metal Science and Heat treatment, 1–5. [Google Scholar]
  28. Tripathi, G.P., Agarwal, S., Awasthi, A., & Arun, V. (2022, August). Artificial Hip Prostheses Design and Its Evaluation by Using Ansys Under Static Loading Condition. In Biennial International Conference on Future Learning Aspects of Mechanical Engineering (pp. 815–828). Singapore: Springer Nature Singapore. [Google Scholar]
  29. Tański, T., Snopiński, P., Prusik, K., et al. The effects of room temperature ECAP and subsequent aging on the structure and properties of the Al-3%Mg aluminium alloy. Mater CharacT. 2017;133:185–195. [CrossRef] [Google Scholar]
  30. Paul, A., Kesharvani, S., Agrawal, A., Dwivedi, G., Singh, V., & Saxena, K.K. (2023). Mechanical and tribological properties of nano clay/PMMA composites extruded with a twin-screw extruder. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231215224. [Google Scholar]
  31. Saxena, A., Saxena, K.K., Singh, B., Rajput, S.K., & Yelamasetti, B. (2023). Study and effect of GtAW parameters on mechanical properties of aluminium dissimilar welded joints: optimization technique. International Journal on Interactive Design and Manufacturing (IJIDeM), 1–11. [Google Scholar]
  32. Agarwal, K.M., Tyagi, R.K., & Saxena, K.K. (2022). Deformation analysis of Al Alloy AA2024 through equal channel angular pressing for aircraft structures. Advances in Materials and Processing technologies, 8(1), 828–842. [CrossRef] [Google Scholar]
  33. Akter F., Ibanez J., Kotter M.. Neural tissue Engineering. Tissue Eng Made Easy. 2016;29–42. [CrossRef] [Google Scholar]
  34. Alsaffar A.J., Raoufi K., Kim K.Y., et al. Simultaneous consideration of unit manufacturing processes and supply chain activities for reduction of product environmental and social impacts. J Manuf Sci Eng trans ASME. 2016;138. [Google Scholar]
  35. Ciemiorek M., Chromiński, W., Jasiński, C., et al. Microstructural changes and formability of Al-Mg ultrafinegrained aluminum plates processed by multi-turn ECAP and upsetting. Mater Sci Eng A. 2022;831:142202. [CrossRef] [Google Scholar]
  36. Awasthi A., Saxena K.K., Arun V.. Sustainability and survivability in manufacturing sector. Mod Manuf Process. 2020. [Google Scholar]
  37. Cesar P.F., Yoshimura H.N., Miranda W.G., et al. Correlation between fracture toughness and leucite content in dental porcelains. J DenT. 2005;33:721–729. [CrossRef] [Google Scholar]
  38. Niu X., Wang C., Chan K.C., et al. Study of numerical simulation during ECAP processing of can based on smooth particle hydrodynamics. Complexity. 2019; [Google Scholar]
  39. Gopala Krishna K., Sivaprasad K., Sankara Narayanan, T.S.N., et al. Localized corrosion of an ultrafine grained Al-4Zn-2Mg alloy produced by cryorolling. Corros Sci [Internet]. 2012;60:82–89. Available from: http://dx.doi.org/10.1016/j.corsci.2012.04.009. [CrossRef] [Google Scholar]
  40. Hussain M., Rao P.N., Singh D., et al. Comparative study of microstructure and mechanical properties of al 6063 alloy processed by multi axial forging at 77k and cryorolling. Procedia Eng. Elsevier Ltd; 2014. p. 129–133. [Google Scholar]
  41. Nasrollah S.A.S., Najmoddin N., Mohammadi M., et al. Three dimensional polyurethane/ hydroxyapatite bioactive scaffolds: the role of hydroxyapatite on pore generation. J Appl Polym Sci. 2021;138:1–14. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.