Open Access
Issue
E3S Web Conf.
Volume 505, 2024
3rd International Conference on Applied Research and Engineering (ICARAE2023)
Article Number 01021
Number of page(s) 10
Section Materials Science
DOI https://doi.org/10.1051/e3sconf/202450501021
Published online 25 March 2024
  1. DiNunzio J.C., Brough C., Hughey J.R., et al. Fusion production of solid dispersions containing a heat-sensitive active ingredient by hot melt extrusion and Kinetisol® dispersing. Eur J Pharm Biopharm. 2010;74:340–351. [CrossRef] [Google Scholar]
  2. Zhang H., He R., Niu Y., et al. Graphene-enabled wearable sensors for healthcare monitoring. Biosens Bioelectron. 2022;197:113777. [Google Scholar]
  3. Krishnaja, D., Cheepu, M., & Venkateswarlu, D. (2018, March). A review of research progress on dissimilar laser weld-brazing of automotive applications. In IOP Conference Series: Materials Science and Engineering (Vol. 330, p. 012073). IOP Publishing. [Google Scholar]
  4. Kalpana G., Kumar P. V., Aljawarneh, S., et al. Shifted Adaption Homomorphism Encryption for Mobile and Cloud Learning. Comput Electr Eng. 2018;65:178–195. [Google Scholar]
  5. Shen J., Zhu Y., Yang X., et al. Graphene quantum dots: Emergent nanolights for bioimaging, sensors, catalysis and photovoltaic devices. Chem Commun. 2012;48:3686–3699. [CrossRef] [PubMed] [Google Scholar]
  6. Yue L., Jayapal M., Cheng X., et al. Highly dispersed ultra-small nano Sn-SnSb nanoparticles anchored on N-doped graphene sheets as high performance anode for sodium ion batteries. Appl Surf Sci. 2020;512:145686. [CrossRef] [Google Scholar]
  7. Gupta, T.K., Budarapu, P.R., Chappidi, S.R., Yb, S.S., Paggi, M., & Bordas, S.P. (2019). Advances in carbon based nanomaterials for bio-medical applications. Current Medicinal Chemistry, 26(38), 6851–6877. [CrossRef] [PubMed] [Google Scholar]
  8. Atchudan R., Jebakumar Immanuel, Edison TN, Shanmugam, M., et al. Sustainable synthesis of carbon quantum dots from banana peel waste using hydrothermal process for in vivo bioimaging. Phys E Low-dimensional Syst Nanostructures. 2021;126:114417. [Google Scholar]
  9. Poul Raj I.L., Valanarasu S., Hariprasad K., et al. Enhancement of optoelectronic parameters of Nd-doped ZnO nanowires for photodetector applications. Opt Mater (Amst). 2020;109:110396. [Google Scholar]
  10. Kumar P.S.S., Allamraju K.V.. A Review Of Natural Fiber Composites [Jute, Sisal, Kenaf]. Mater today Proc. 2019;18:2556–2562. [Google Scholar]
  11. Chandrappa, V., Basavapoornima, C., Kesavulu, C.R., Babu, A.M., Depuru, S.R., & Jayasankar, C.K. (2022). Spectral studies of Dy3+: zincphosphate glasses for white light source emission applications: a comparative study. Journal of Non-Crystalline Solids, 583, 121466. [Google Scholar]
  12. Yadav S., Yamasani P., Kumar S.. Experimental studies on a micro power generator using thermo-electric modules mounted on a micro-combustor. Energy Convers Manag. 2015;99:1–7. [Google Scholar]
  13. Jaffery H.A., Sabri M.F.M., Said S.M., et al. Electrochemical corrosion behavior of Sn-0.7Cu solder alloy with the addition of bismuth and iron. J Alloys Compd. 2019;810:151925. [Google Scholar]
  14. Pandey A., Awasthi A., Saxena K.K.. Metallic implants with properties and latest production techniques: a review. Adv. Mater. Process. technol. 2020. [Google Scholar]
  15. De la Bat, B.J.G., Dobson, R.T., Harms, T.M., et al. Simulation, manufacture and experimental validation of a novel single-acting free-piston Stirling engine electric generator. Appl Energy. 2020;263:114585. [CrossRef] [Google Scholar]
  16. Chaudhary, N., Dikshit, M.K., Kumar, C.L., Sonia, P., Pathak, V.K., Saxena, K.K., … & Salmaan, N.U. (2023). Sustainable mechanical properties evaluation for graphene reinforced Epoxy/Kevlar fiber using MD simulations. Journal of Experimental Nanoscience, 18(1), 2246662. [CrossRef] [Google Scholar]
  17. Wang Z., Eisen M., Ribeiro A.. Learning Decentralized Wireless Resource Allocations With Graph Neural Networks. IEEE trans Signal Process. 2022;70:1850–1863. [Google Scholar]
  18. Pal P., Sambhakar S., Dave V., et al. A review on emerging smart technological innovations in healthcare sector for increasing patient’s medication adherence. Glob Heal J. 2021;5:183–189. [Google Scholar]
  19. Sinha A., Kumar Rajak D., Shaik N.B., et al. A review on 4D printing of Nickel-titanium smart alloy processing, the effect of major parameters and their biomedical applications. Proc. InsT. Mech. Eng. Part E J. Process Mech. Eng. SAGE PublicationsSage UK: London, England; 2023. [Google Scholar]
  20. Zarandi S., Tabassum, H. Federated Double Deep Q-learning for Joint Delay and Energy Minimization in Iot networks. 2021 IEEE Int Conf Commun Work ICC Work 2021 - Proc. 2021; [Google Scholar]
  21. Basanth Kumar K., Saxena K.K., Dey S.R., et al. Peak stress studies of hot compressed tiHy 600 alloy. Mater today Proc. 2017;4:7365–7374. [Google Scholar]
  22. Singh, L., Yahya, M.M., Singh, B., Sehgal, S., Saxena, K.K., & Mohammed, K.A. (2023). Investigation of the Effects of Overlapping Passes on Friction Stir Processed Aluminum Alloy 5083. Metal Science and Heat treatment, 1–5. [Google Scholar]
  23. Wojciechowski S., Królczyk, G.M., Maruda, R.W. Advances in hard-to-cut materials: Manufacturing, properties, process mechanics and evaluation of surface integrity. Materials (Basel). 2020;13. [Google Scholar]
  24. Sankaranarayanan R.N. Rjh, J.S.K., et al. A comprehensive review on research developments of vegetable-oil based cutting fluids for sustainable machining challenges. J Manuf Process. 2021;67:286–313. [Google Scholar]
  25. Paul, A., Kesharvani, S., Agrawal, A., Dwivedi, G., Singh, V., & Saxena, K.K. (2023). Mechanical and tribological properties of nano clay/PMMA composites extruded with a twin-screw extruder. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231215224. [Google Scholar]
  26. Alsaffar A.J., Raoufi K., Kim K.Y., et al. Simultaneous consideration of unit manufacturing processes and supply chain activities for reduction of product environmental and social impacts. J Manuf Sci Eng trans ASME. 2016;138. [Google Scholar]
  27. Awasthi, A., Gupta, A., Saxena, K.K., Dwivedi, R.K., Kundalkar, D., Abdul-Zahra, D.S., … & Saggu, H.S. (2022). Design and analysis of equal-channel angular pressing of Al6061: a comparative study. Advances in Materials and Processing technologies, 1–10. [CrossRef] [Google Scholar]
  28. Ki C.S., Park S.Y., Kim H.J., et al. Development of 3-D nanofibrous fibroin scaffold with high porosity by electrospinning: Implications for bone regeneration. Biotechnol LetT. 2008;30:405–410. [Google Scholar]
  29. Kolesky D.B., Truby, R.L., Gladman, A.S., et al. 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs. Adv Mater [Internet]. 2014 [cited 2021 Aug 4];26:3124–3130. Available from: http://www.ncbi.nlm.nih.gov/pubmed/24550124. [CrossRef] [PubMed] [Google Scholar]
  30. Saxena, K.K., & Awasthi, A. (2020). Novel Additive Manufacturing Processes and techniques in Industry 4.0. In Handbook of Research on Integrating Industry 4.0 in Business and Manufacturing (pp. 439–455). IGI Global. [Google Scholar]
  31. Awasthi A., Saxena K.K., Arun V.. Sustainable and smart metal forming manufacturing process. Mater today Proc. 2021;44:2069–2079. [Google Scholar]
  32. Arun V., Singh A.K., Shukla N.K., et al. Design and performance analysis of SOA-MZI based reversible toffoli and irreversible AND logic gates in a single photonic circuiT. Opt Quantum Electron. 2016;48:1–15. [Google Scholar]
  33. Awasthi A., Saxena K.K., Arun V.. Sustainability and survivability in manufacturing sector. Mod Manuf Process. 2020. [Google Scholar]
  34. Ning Z., Dong P., Wang X., et al. Deep reinforcement learning for vehicular edge computing: An intelligent offloading system. ACM trans Intell Syst technol. 2019;10. [Google Scholar]
  35. P. Sonia, J.K. Jain, K.K. Saxena, J. Lade, V. Malik, and R. Singh, “Fabrication and characterization of magnesium-based mg-titania surface composite for bioimplants,” Surf. rev. letT., vol. 0, no. 0, p. 2340003, DOI: 10.1142/s0218625x23400036. [Google Scholar]
  36. Pankaj, Sonia, Jinesh K. Jain, Naveenkrishna, Alla, Manish, Gupta, Md Irfanul Haque, Siddiqui, Karrar Hazim, Salem, Farooq, Ahmed & Sherzod Shukhratovich, Abdullaev (2023) Friction stir processing of AZ31 alloy to improve the mechanical, biodegradation, and in vitro biocompatible characteristics, Journal of Adhesion Science and technology, DOI: 10.1080/01694243.2023.2283969 [Google Scholar]
  37. P. Sonia, J.K. Jain, and K.A. Mohammed, “A Review of Magnesium Based MMC Fabrication techniques for Biomedical Applications,” Key Eng. Mater., vol. 924, pp. 141–150, 2022, DOI: 10.4028/p-g66wl1. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.