Open Access
E3S Web Conf.
Volume 505, 2024
3rd International Conference on Applied Research and Engineering (ICARAE2023)
Article Number 01022
Number of page(s) 10
Section Materials Science
Published online 25 March 2024
  1. Wang X.L., Wang X.M., Shang C.J., et al. Characterization of the multi-pass weld metal and the impact of retained austenite obtained through intercritical heat treatment on low temperature toughness. Mater Sci Eng A. 2016;649:282–292. [Google Scholar]
  2. Paul, A., Kesharvani, S., Agrawal, A., Dwivedi, G., Singh, V., & Saxena, K.K. (2023). Mechanical and tribological properties of nano clay/PMMA composites extruded with a twin-screw extruder. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231215224. [Google Scholar]
  3. Poul Raj I.L., Valanarasu S., Hariprasad K., et al. Enhancement of optoelectronic parameters of Nd-doped ZnO nanowires for photodetector applications. Opt Mater (Amst). 2020;109:110396. [Google Scholar]
  4. Modenesi P.J., Apolinário, E.R., Pereira, I.M. TIG welding with single-component fluxes. J Mater Process technol. 2000;99:260–265. [CrossRef] [Google Scholar]
  5. Singh, L., Yahya, M.M., Singh, B., Sehgal, S., Saxena, K.K., & Mohammed, K.A. (2023). Investigation of the Effects of Overlapping Passes on Friction Stir Processed Aluminum Alloy 5083. Metal Science and Heat treatment, 1–5. [Google Scholar]
  6. Chaudhary, N., Dikshit, M.K., Kumar, C.L., Sonia, P., Pathak, V.K., Saxena, K.K., … & Salmaan, N.U. (2023). Sustainable mechanical properties evaluation for graphene reinforced Epoxy/Kevlar fiber using MD simulations. Journal of Experimental Nanoscience, 18(1), 2246662. [CrossRef] [Google Scholar]
  7. Kalpana G., Kumar P. V., Aljawarneh, S., et al. Shifted Adaption Homomorphism Encryption for Mobile and Cloud Learning. Comput Electr Eng. 2018;65:178–195. [Google Scholar]
  8. Kumar P.S.S., Allamraju K.V.. A Review Of Natural Fiber Composites [Jute, Sisal, Kenaf]. Mater today Proc. 2019;18:2556–2562. [Google Scholar]
  9. Gupta A., Chandrasekhar B., Saxena K.K.. Effect of Equal-channel angular pressing on mechanical Properties: An overview. Mater today Proc. 2021; [Google Scholar]
  10. Atchudan R., Jebakumar Immanuel E. Dison, N., Shanmugam, M., et al. Sustainable synthesis of carbon quantum dots from banana peel waste using hydrothermal process for in vivo bioimaging. Phys E Low-dimensional Syst Nanostructures. 2021;126:114417. [Google Scholar]
  11. Awasthi A., Saxena K.K., Arun V.. Sustainable and smart metal forming manufacturing process. Mater today Proc. 2021;44:2069–2079. [Google Scholar]
  12. Krishnaja, D., Cheepu, M., & Venkateswarlu, D. (2018, March). A review of research progress on dissimilar laser weld-brazing of automotive applications. In IOP Conference Series: Materials Science and Engineering (Vol. 330, p. 012073). IOP Publishing. [Google Scholar]
  13. Ramesh M.V.L., Rao P.S., Rao V.V., et al. Structure - Properties Evaluation in Laser Beam Welds of High Strength Low Alloy Steel. Mater today Proc. 2015;2:2532–2537. [Google Scholar]
  14. Arora, G.S., Gupta, A., & Saxena, K.K. (2024). Evaluation of mechanical, microstructural, tribological characteristics and cytocompatibility in AZ31 hybrid bio-composite reinforced with tiO2-HAp. Results in Surfaces and Interfaces, 14, 100174. [Google Scholar]
  15. Chandrappa, V., Basavapoornima, C., Kesavulu, C.R., Babu, A.M., Depuru, S.R., & Jayasankar, C.K. (2022). Spectral studies of Dy3+: zincphosphate glasses for white light source emission applications: a comparative study. Journal of Non-Crystalline Solids, 583, 121466. [Google Scholar]
  16. Jaffery H.A., Sabri M.F.M., Said S.M., et al. Electrochemical corrosion behavior of Sn-0.7Cu solder alloy with the addition of bismuth and iron. J Alloys Compd. 2019;810:151925. [Google Scholar]
  17. Karabulut, Ş., Bilgin, M., Karakoç, H., et al. A study on the influence of thermally assisted novel hybrid methods on the drilling behavior of ti6Al4V alloy. Tribol InT. 2022;175. [Google Scholar]
  18. Yadav S., Yamasani P., Kumar S.. Experimental studies on a micro power generator using thermo-electric modules mounted on a micro-combustor. Energy Convers Manag. 2015;99:1–7. [Google Scholar]
  19. Saxena, A., Saxena, K.K., Singh, B., Rajput, S.K., & Yelamasetti, B. (2023). Study and effect of GtAW parameters on mechanical properties of aluminium dissimilar welded joints: optimization technique. International Journal on Interactive Design and Manufacturing (IJIDeM), 1–11. [Google Scholar]
  20. Skariya P.D., Satheesh M., Dhas E.R., et al. Experimental investigation of pftig welding process on 15CDV6 steel using nanopowders. Int J Mech Prod Eng Res Dev. 2018;8:237–246. [Google Scholar]
  21. Gupta, T.K., Budarapu, P.R., Chappidi, S.R., Yb, S.S., Paggi, M., & Bordas, S.P. (2019). Advances in carbon based nanomaterials for bio-medical applications. Current Medicinal Chemistry, 26(38), 6851–6877. [CrossRef] [PubMed] [Google Scholar]
  22. Yelamasetti, B.N.S.S., Saxena, K.K., Gupta, N.P.N.K., & Shelare, S.D. (2023). Metallurgical, mechanical and corrosion behavior of Interpulse and pulsed current tIG dissimilar welds of Monel 400 and AISI 316L. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231216029. [Google Scholar]
  23. Agarwal K.M., Tyagi, R.K., Saxena, K.K. Deformation analysis of Al Alloy AA2024 through equal channel angular pressing for aircraft structures. Adv Mater Process technol. 2020;1–15. [Google Scholar]
  24. Yue L., Jayapal M., Cheng X., et al. Highly dispersed ultra-small nano Sn-SnSb nanoparticles anchored on N-doped graphene sheets as high performance anode for sodium ion batteries. Appl Surf Sci. 2020;512:145686. [CrossRef] [Google Scholar]
  25. Singh N., Hameed P., Ummethala R., et al. Selective laser manufacturing of ti-based alloys and composites: impact of process parameters, application trends, and future prospects. Mater today Adv. 2020;8. [Google Scholar]
  26. Malyshev V.N. Tribological aspects in friction stir welding and processing. Adv Frict Weld Process. 2014. [Google Scholar]
  27. K. Bk, Saxena, K.K., Dey, S.R., et al. Processing map-microstructure evolution correlation of hot compressed near alpha titanium alloy (tiHy 600). J Alloys Compd. 2017; [Google Scholar]
  28. Saresh N., Pillai M.G., Mathew J.. Investigations into the effects of electron beam welding on thick ti-6Al-4V titanium alloy. J Mater Process technol. 2007;192-193:83–88. [CrossRef] [Google Scholar]
  29. Awasthi, A., Saxena, K.K., Dwivedi, R.K., Buddhi, D., & Mohammed, K.A. (2023). Design and analysis of ECAP Processing for Al6061 Alloy: a microstructure and mechanical property study. International Journal on Interactive Design and Manufacturing (IJIDeM), 17(5), 2309–2321. [Google Scholar]
  30. Hillmann G., Gebert A., Geurtsen W.. Matrix expression and proliferation of primary gingival fibroblasts in a three-dimensional cell culture model. J Cell Sci. 1999;112:2823–2832. [Google Scholar]
  31. Yang J., Yu X., Wang Y., et al. Effect of tiC Content on Microstructures and Properties of Laser Cladding tiC/ti Based Composite Coatings. Hangkong Cailiao Xuebao/Journal Aeronaut Mater. 2018; [Google Scholar]
  32. Imran M., Mativenga P., Gholinia, A., et al. Comparison of tool wear mechanisms and surface integrity for dry and wet micro-drilling of nickel-base superalloys. Int J Mach tools Manuf. 2014;76:49–60. [Google Scholar]
  33. Dhiman S., Joshi R.S., Singh S., et al. A framework for effective and clean conversion of machining waste into metal powder feedstock for additive manufacturing. Clean Eng technol. 2021;4. [Google Scholar]
  34. Yadav, A.K., Awasthi, A., Saxena, K.K., & Agrawal, M.K. (2022, July). Critical Review on 3D Scaffolds Materials. In Materials Science Forum (Vol. 1065, pp. 129–143). Trans tech Publications Ltd. [Google Scholar]
  35. Tisza M., Czinege I.. Comparative study of the application of steels and aluminium in lightweight production of automotive parts. Int J Light Mater Manuf. 2018; [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.