Open Access
E3S Web Conf.
Volume 505, 2024
3rd International Conference on Applied Research and Engineering (ICARAE2023)
Article Number 01034
Number of page(s) 10
Section Materials Science
Published online 25 March 2024
  1. Wolcott P.J., Dapino M.J. Ultrasonic additive manufacturing. Addit Manuf Handb Prod Dev Def Ind. 2017. [Google Scholar]
  2. Gupta, T.K., Budarapu, P.R., Chappidi, S.R., et al. Advances in Carbon Based Nanomaterials for Bio-Medical Applications. Curr Med Chem [Internet]. 2019 [cited 2023 Apr 27];26:6851–6877. Available from: [Google Scholar]
  3. Krishnaja D., Cheepu M., Venkateswarlu D. A Review of Research Progress on Dissimilar Laser Weld-Brazing of Automotive Applications. IOP Conf Ser Mater Sci Eng [Internet]. 2018 [cited 2023 Apr 23];330:012073. Available from: [Google Scholar]
  4. Yadav S., Yamasani P., Kumar S. Experimental studies on a micro power generator using thermo-electric modules mounted on a micro-combustor. Energy Convers Manag. 2015;99:1–7. [Google Scholar]
  5. Yue L., Jayapal M., Cheng X., et al. Highly dispersed ultra-small nano Sn-SnSb nanoparticles anchored on N-doped graphene sheets as high performance anode for sodium ion batteries. Appl Surf Sci. 2020;512:145686. [CrossRef] [Google Scholar]
  6. Leal-Junior A.G., Diaz C.A.R., Avellar L.M., et al. Polymer optical fiber sensors in healthcare applications: A comprehensive review. Sensors (Switzerland). 2019;19. [Google Scholar]
  7. Agarwal K.M., Tyagi R.K., Saxena, V., et al. Mechanical behaviour of Aluminium Alloy AA6063 processed through ECAP with optimum die design parameters. Adv Mater Process technol [Internet]. 2021;00:1–15. Available from: [Google Scholar]
  8. Katiyar V., Gupta R., Ghosh, T., editors. Advances in Sustainable Polymers. 2019 [cited 2023 Apr 29]; Available from: [CrossRef] [Google Scholar]
  9. Vishwanatha H., Saxena K.K., Pramanik A., et al. Cryo treatment and corrosion studies of nickel-titanium shapememory alloy. [Internet]. 2023 [cited 2023 Apr 25];095440892311592. Available from: [Google Scholar]
  10. Stoeckel, D. Nitinol medical devices and implants. Minim. Invasive ther. Allied technol. 2000. [Google Scholar]
  11. Niinomi, M. Metallic biomaterials. J. Artif. Organs. 2008. [Google Scholar]
  12. Agarwal K.M., Tyagi, R.K., Saxena, K.K. Deformation analysis of Al Alloy AA2024 through equal channel angular pressing for aircraft structures. Adv Mater Process technol. 2020;1–15. [Google Scholar]
  13. Mohammed, M.T., Khan, Z.A., Siddiquee, A.N. Surface Modifications of titanium Materials for developing Corrosion Behavior in Human Body Environment: A Review. Procedia Mater Sci. 2014;6:1610–1618. [Google Scholar]
  14. Awasthi A., Gupta A., Saxena K.K., et al. Equal channel angular processing on aluminium and its alloys - A review. Mater today Proc. 2022;56:2388–2391. [Google Scholar]
  15. Jaffery H.A., Sabri M.F.M., Said S.M., et al. Electrochemical corrosion behavior of Sn-0.7Cu solder alloy with the addition of bismuth and iron. J Alloys Compd. 2019;810:151925. [Google Scholar]
  16. Chandrappa V., Basavapoornima C., Kesavulu C.R., et al. Spectral studies of Dy3+:zincphosphate glasses for white light source emission applications: A comparative study. J Non Cryst Solids [Internet]. 2022 [cited 2023 Apr 23];583:121466. Available from: [CrossRef] [Google Scholar]
  17. Grover, T., Pandey, A., Kumari, S.T., et al. Role of titanium in bio implants and additive manufacturing: An overview. Mater today Proc [Internet]. 2020; Available from: [Google Scholar]
  18. Kumar P.S.S., Allamraju K.V. A Review Of Natural Fiber Composites [Jute, Sisal, Kenaf]. Mater today Proc. 2019;18:2556–2562. [Google Scholar]
  19. Hook A.L., Alexander M.R., Winkler D.A. Materiomics: A toolkit for Developing New Biomaterials. Tissue Eng Second Ed. 2014;253–281. [Google Scholar]
  20. Yadav P., Saxena K.K. Effect of heat-treatment on microstructure and mechanical properties of ti alloys: An overview. Mater today Proc. 2020;26:2546–2557. [Google Scholar]
  21. Alsaffar A.J., Raoufi K., Kim K.Y., et al. Simultaneous consideration of unit manufacturing processes and supply chain activities for reduction of product environmental and social impacts. J Manuf Sci Eng trans ASME. 2016;138. [Google Scholar]
  22. Kumar Yadav A., Agrawal M.K., Saxena K.K., et al. Prediction of thermal fields and stresses developed in GtAW dissimilar weldments of AA 5083 and AA 6082. Mater today Proc. 2023; [Google Scholar]
  23. Atchudan R., Jebakumar Immanuel E. Dison, N., Shanmugam, M., et al. Sustainable synthesis of carbon quantum dots from banana peel waste using hydrothermal process for in vivo bioimaging. Phys E Low-dimensional Syst Nanostructures. 2021;126:114417. [Google Scholar]
  24. Kalpana G., Kumar P.V., Aljawarneh, S., et al. Shifted Adaption Homomorphism Encryption for Mobile and Cloud Learning. Comput Electr Eng. 2018;65:178–195. [Google Scholar]
  25. Poul Raj I.L., Valanarasu S., Hariprasad K., et al. Enhancement of optoelectronic parameters of Nd-doped ZnO nanowires for photodetector applications. Opt Mater (Amst). 2020;109:110396. [Google Scholar]
  26. Zhang J., Tan, B., Zhang, X., et al. Atomically thin Hexagonal Boron Nitride and Its Heterostructures. Adv Mater. 2021;33. [Google Scholar]
  27. Samyal R., Bagha A.K., Bedi R., et al. Predicting the effect of fiber orientations and boundary conditions on the optimal placement of PZt sensor on the composite structures. Mater Res Express. 2021;8. [Google Scholar]
  28. Enriquez-Flores, C.I. Gervacio-Arciniega J.J., Flores-Ruiz F.J., Cardona, D., et al. Piezoresponse Force Microscopy Studies of pc-BiFeO3 thin Films Produced by the Simultaneous Laser Ablation of Bi and FeO3. Mater Res Soc Symp Proc. 2012;1477:61–66. [Google Scholar]
  29. Saxena K.K., Kumar K.B., Gupta A. Effect of processing parameters on equal-channel angular pressing of aluminum alloys: An overview. Mater today Proc. Elsevier Ltd; 2021. p. 5551–5559. [Google Scholar]
  30. Schafer, T., Schraft, R.D. Incremental sheet metal forming by industrial robots. Rapid Prototyp J. 2005; [Google Scholar]
  31. Sinha A., Kumar Rajak D., Shaik N.B., et al. A review on 4D printing of Nickel-titanium smart alloy processing, the effect of major parameters and their biomedical applications. [Internet]. 2023 [cited 2023 Apr 25]; Available from: [Google Scholar]
  32. Niinomi, M. Metallic biomaterials. J Artif Organs. 2008;11:105. [Google Scholar]
  33. Schlesinger E., Johengen D., Luecke E., et al. A tunable, Biodegradable, thin-Film Polymer Device as a Long- Acting Implant Delivering tenofovir Alafenamide Fumarate for HIV Pre-exposure Prophylaxis. Pharm Res. 2016;33:1649–1656. [Google Scholar]
  34. Agarwal K.M., Tyagi R.K., Saxena, V., et al. Mechanical behaviour of Aluminium Alloy AA6063 processed through ECAP with optimum die design parameters. Adv Mater Process technol. 2021; [Google Scholar]
  35. Arun V., Singh A.K., Shukla N.K., et al. Design and performance analysis of SOA-MZI based reversible toffoli and irreversible AND logic gates in a single photonic circuiT. Opt Quantum Electron. 2016;48:1–15. [Google Scholar]
  36. Awasthi A., Saxena K.K., Arun V. Sustainable and smart metal forming manufacturing process. Mater today Proc. 2021;44:2069–2079. [Google Scholar]
  37. Gupta A., Kundalkar D., Saxena K.K. Investigation on deformation of Inconel alloy 751. Mater today Proc. 2021; [Google Scholar]
  38. Davis J., Edgar, T., Porter, J., et al. Smart manufacturing, manufacturing intelligence and demand-dynamic performance. Comput Chem Eng. 2012; [Google Scholar]
  39. Kusiak, A. Smart manufacturing. Int J Prod Res. 2018; [Google Scholar]
  40. Gupta N., Gupta A., Saxena K.K., et al. Mechanical and durability properties of geopolymer concrete composite at varying superplasticizer dosage. Mater today Proc. 2021;44:12–16. [Google Scholar]
  41. Song X., Yang S., Huang Z., et al. The Application of Artificial Intelligence in Electronic Commerce. J Phys Conf Ser. 2019. [Google Scholar]
  42. Wysocki B., Maj P., Sitek R., et al. Laser and electron beam additive manufacturing methods of fabricating titanium bone implants. Appl Sci. 2017; [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.