EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 505 (2024) E3S Web Conf., 505 (2024) 02005 References
Open Access
Issue
E3S Web Conf.
Volume 505, 2024
3rd International Conference on Applied Research and Engineering (ICARAE2023)
Article Number 02005
Number of page(s) 9
Section Renewable Energy
DOI https://doi.org/10.1051/e3sconf/202450502005
Published online 25 March 2024
  1. Abdullah Al, A., Aktab, S. A., Trisha, S. I., & Hasan, M. (2023). Iot Based Water Purification System Using Solar Energy (Doctoral Dissertation, “Faculty Of Engineering, American International University- Bangladesh). [Google Scholar]
  2. Baig, A., Zodape, V., Kosare, D., Meshram, D., Raut, P., Kolte, Y., & Muneshwar, A. Investigation Of Charcoal As A Filter Material In Water Treatment. [Google Scholar]
  3. Ghernaout, D., Irki, S., Elboughdiri, N., & Ghernaout, B. (2023). Solar-Driven Water Treatment: New Technologies, Challenges, and Futures. Green and Sustainable Chemistry, 13(2), 110–152. [CrossRef] [Google Scholar]
  4. Senna, D. A., Moreira, V. R., Amaral, M. C. S., de Paula, E. C., Pereira, L. P., Batista, R. M. G., … & Rezende, S. (2023). Industry 4.0 as a strategy to contribute to the water supply universalization in developing countries. Journal of Environmental Chemical Engineering, 11(6), 111198. [CrossRef] [Google Scholar]
  5. Basavapoornima, C., Kesavulu, C. R., Maheswari, T., Pecharapa, W., Depuru, S. R., & Jayasankar, C. K. (2020). Spectral characteristics of Pr3+-doped leadbased phosphate glasses for optical display device applications. Journal of Luminescence, 228, 117585. [CrossRef] [Google Scholar]
  6. Saxena, K. K., & Lal, A. (2012). Comparative Molecular Dynamics simulation study of mechanical properties of carbon nanotubes with number of stone-wales and vacancy defects. Procedia Engineering, 38, 2347–2355. [CrossRef] [Google Scholar]
  7. Chaitanya, B., Akhter, M. Z., Ramachandran, T., Al-Marzouqi, A. H., & Omar, F. K. (2023, February). Trends in Solar Powered Water Desalination Using Hydrogels: A Short Review. In 2023 Advances in Science and Engineering Technology International Conferences (ASET) (pp. 1–5). IEEE. [Google Scholar]
  8. Godavarthi, B., Nalajala, P., & Ganapuram, V. (2017, August). Design and implementation of vehicle navigation system in urban environments using internet of things (IoT). In IOP Conference Series: Materials Science and Engineering (Vol. 225, No. 1, p. 012262). IOP Publishing. [CrossRef] [Google Scholar]
  9. Kumari, C. U., Murthy, A. S. D., Prasanna, B. L., Reddy, M. P. P., & Panigrahy, A. K. (2021). An automated detection of heart arrhythmias using machine learning technique: SVM. Materials Today: Proceedings, 45, 1393–1398. [CrossRef] [Google Scholar]
  10. Saxena, K. K., Srivastava, V., & Sharma, K. (2012). Calculation of Fundamental Mechanical Properties of Single Walled Carbon Nanotube using Non-local Elasticity. Advanced Materials Research, 383, 3840–3844. [Google Scholar]
  11. Tripathi, G. P., Agarwal, S., Awasthi, A., & Arun, V. (2022, August). Artificial Hip Prostheses Design and Its Evaluation by Using Ansys Under Static Loading Condition. In Biennial International Conference on Future Learning Aspects of Mechanical Engineering (pp. 815–828). Singapore: Springer Nature Singapore. [Google Scholar]
  12. Reddy, K. S. P., Roopa, Y. M., Ln, K.R., & Nandan, N.S. (2020, July). IoT based smart agriculture using machine learning. In 2020 Second international conference on inventive research in computing applications (ICIRCA) (pp. 130–134). IEEE [Google Scholar]
  13. He, W., Le Henaff, A. C., Amrose, S., Buonassisi, T., Peters, I., & Winter, A. (2023). Flexible batch electrodialysis for low-cost solar-powered brackish water desalination. [Google Scholar]
  14. Agrawal, R., Singh, S., Saxena, K. K., & Buddhi, D. (2023). A role of biomaterials in tissue engineering and drug encapsulation. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221150740. [Google Scholar]
  15. Arun, V., Shukla, N. K., Singh, A. K., & Upadhyay, K. K. (2015, September). Design of all optical line selector based on SOA for data communication. In Proceedings of the Sixth International Conference on Computer and Communication Technology 2015 (pp. 281–285). [Google Scholar]
  16. SudhirSastry, Y. B., Krishna, Y., & Budarapu, P. R. (2015). Parametric studies on buckling of thin walled channel beams. Computational Materials Science, 96, 416–424. [CrossRef] [Google Scholar]
  17. Ramadugu, S., Ledella, S. R. K., Gaduturi, J. N. J., Pinninti, R. R., Sriram, V., & Saxena, K. K. (2023). Environmental life cycle assessment of an automobile component fabricated by additive and conventional manufacturing. International Journal on Interactive Design and Manufacturing (IJIDeM), 1–12. [Google Scholar]
  18. Liu, M., Zhang, S., Yuan, T., & Bao, C. (2023). Low-cost, scalable, and durable coal-based composite aerogel beads solar evaporator for efficient seawater desalination and wastewater purification. Desalination, 550, 116401. [CrossRef] [Google Scholar]
  19. Swapna Sri, M. N., Anusha, P., Madhav, V. V., Saxena, K. K., Chaitanya, C. S., Haranath, R., & Singh, B. (2023). Influence of Cu particulates on a356mmc using frequency response function and damping ratio. Advances in Materials and Processing Technologies, 1–9. [CrossRef] [Google Scholar]
  20. Telagam, N., Kandasamy, N., & Nanjundan, M. (2017). Smart sensor network based high quality air pollution monitoring system using labview. International Journal of Online Engineering (iJOE), 13(08), 79–87. [CrossRef] [Google Scholar]
  21. Li, F., Li, N., Wang, S., Qiao, L., Yu, L., Murto, P., & Xu, X. (2021). Self-repairing and damage-tolerant hydrogels for efficient solar-powered water purification and desalination. Advanced Functional Materials, 31(40), 2104464. [CrossRef] [Google Scholar]
  22. Hu, Y., Yao, H., Liao, Q., Lin, T., Cheng, H., & Qu, L. (2022). The promising solar-powered water purification based on graphene functional architectures. EcoMat, 4(5), e12205. [CrossRef] [Google Scholar]
  23. Arora, G. S., & Saxena, K. K. (2023). A review study on the influence of hybridization on mechanical behaviour of hybrid Mg matrix composites through powder metallurgy. Materials Today: Proceedings. [Google Scholar]
  24. Ajith, J. B., Manimegalai, R., & Ilayaraja, V. (2020, February). An IoT based smart water quality monitoring system using cloud. In 2020 International conference on emerging trends in information technology and engineering (ic-ETITE) (pp. 1–7). IEEE. [Google Scholar]
  25. Elasaad, H., Bilton, A., Kelley, L., Duayhe, O., & Dubowsky, S. (2015). Field evaluation of a community scale solar powered water purification technology: A case study of a remote Mexican community application. Desalination, 375, 71–80. [CrossRef] [Google Scholar]
  26. Korpi, A. G., Țălu, Ş., Bramowicz, M., Arman, A., Kulesza, S., Pszczolkowski, B., … & Gopikishan, S. (2019). Minkowski functional characterization and fractal analysis of surfaces of titanium nitride films. Materials Research Express, 6(8), 086463. [CrossRef] [Google Scholar]
  27. Dikgale, K., Ntobela, D. F., Mendes, B. G. V., Tartibu, L. K., Kunene, T. J., & Bakaya-Kyahurwa, E. (2019). Development of solar powered water purification systems. [Google Scholar]
  28. Zhao, F., Guo, Y., Zhou, X., Shi, W., & Yu, G. (2020). Materials for solar-powered water evaporation. Nature Reviews Materials, 5(5), 388–401. [CrossRef] [Google Scholar]
  29. Awasthi, A., Saxena, K. K., & Arun, V. (2020). Sustainability and survivability in manufacturing sector. In Modern Manufacturing Processes (pp. 205–219). Woodhead Publishing. [CrossRef] [Google Scholar]
  30. Zewdie, T. M., Habtu, N. G., Dutta, A., & Van der Bruggen, B. (2021). Solar-assisted membrane technology for water purification: a review. Water Reuse, 11(1), 1–32. [Google Scholar]
  31. Arun, V., Singh, A. K., Shukla, N. K., & Tripathi, D. K. (2016). Design and performance analysis of SOA - MZI based reversible toffoli and irreversible AND logic gates in a single photonic circuit. Optical and quantum electronics, 48, 1–15. [CrossRef] [Google Scholar]
  32. Singh, B., Saxena, K. K., Dagwa, I. M., Singhal, P., & Malik, V. (2023). Optimization Of Machining Characteristics of Titanium-Based Biomaterials: Approach to Optimize Surface Integrity for Implants Applications. Surface Review and Letters, 2340008. [Google Scholar]
  33. Balguri, P. K., Samuel, D. H., & Thumu, U. (2021). A review on mechanical properties of epoxy nanocomposites. Materials Today: Proceedings, 44, 346–355. [CrossRef] [Google Scholar]
  34. Awasthi, A., Saxena, K. K., Dwivedi, R. K., Buddhi, D., & Mohammed, K. A. (2022). Design and analysis of ECAP Processing for Al6061 Alloy: a microstructure and mechanical property study. International Journal on Interactive Design and Manufacturing (IJIDeM), 1–13. [Google Scholar]
  35. Wong, Y. (2014). Scalable, Solar Powered Membrane-Based Water Purification Systems for Community Development in Developing Countries. [Google Scholar]
  36. Gupta, T. K., Budarapu, P. R., Chappidi, S. R., Yb, S.S., Paggi, M., & Bordas, S.P. (2019). Advances in carbon-based nanomaterials for bio-medical applications. Current Medicinal Chemistry, 26(38), 6851–6877. [CrossRef] [PubMed] [Google Scholar]
  37. Basha, R. F. K., & Venusamy, K. (2021, December). IoT Enabled Solar Powered Water Purification System for Rural Areas. In 2021 IEEE International Conference on Mobile Networks and Wireless Communications (ICMNWC) (pp. 1–6). IEEE. [Google Scholar]
  38. Kumar, S., Kumar, M., Chowdhury, S., Rajpurohit, B. S., & Randhawa, J. K. (2022). Environmental concerns and long-term solutions for solar-powered water desalination. Journal of Cleaner Production, 345, 131180. [CrossRef] [Google Scholar]
  39. Awasthi, A., Saxena, K. K., & Arun, V. (2021). Sustainable and smart metal forming manufacturing process. Materials Today: Proceedings, 44, 2069–2079. [CrossRef] [Google Scholar]
  40. Lei, C., Guo, Y., Guan, W., & Yu, G. (2021). Polymeric materials for solar water purification. Journal of Polymer Science, 59(24), 3084–3099. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.