EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 507 (2024) E3S Web of Conf., 507 (2024) 01021 References
Open Access
Issue
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01021
Number of page(s) 7
DOI https://doi.org/10.1051/e3sconf/202450701021
Published online 29 March 2024
  1. Seed, H. Bolton, and Izzat M. Idriss. “Influence of soil conditions on ground motions during earthquakes.” Journal of the Soil Mechanics and Foundations Division 95.1 (1969): 99–137. [CrossRef] [Google Scholar]
  2. Galal, K., and M. Naimi. “Effect of soil conditions on the response of reinforced concrete tall structures to near‐fault earthquakes.” The Structural Design of Tall and Special Buildings 17.3 (2008): 541–562. [CrossRef] [Google Scholar]
  3. Brunelli, A., et al. “Numerical simulation of the seismic response and soil–structure interaction for a monitored masonry school building damaged by the 2016 Central Italy earthquake.” Bulletin of Earthquake Engineering 19.2 (2021): 1181–1211. [CrossRef] [Google Scholar]
  4. Isbiliroglu, Yigit, Ricardo Taborda, and Jacobo Bielak. “Coupled soil-structure interaction effects of building clusters during earthquakes.” Earthquake Spectra 31.1 (2015): 463–500. [CrossRef] [Google Scholar]
  5. Matinmanesh, H., and M. Saleh Asheghabadi. “Seismic analysis on soil-structure interaction of buildings over sandy soil.” Procedia Engineering 14 (2011): 1737–1743. [CrossRef] [Google Scholar]
  6. Bhojak, Vishal, Jayahari Lade, Jinesh Kumar Jain, Amar Patnaik, and Kuldeep Kumar Saxena. “Investigation of annealing on CR-2 grade steel using Taguchi and Taguchi based gray relational analysis.” Advances in Materials and Processing Technologies 8, no. sup4 (2022): 2231–2246. [Google Scholar]
  7. Abdel, Raheem Shehata E., Mohamed M. Ahmed, and Tarek MA Alazrak. “Evaluation of Soil–foundation-structure Interaction Effects on Seismic Response Demands of Multi-storey MRF Buildings on Raft Foundations.” (2015): 11–30. [Google Scholar]
  8. Lu, Yang, Iman Hajirasouliha, and Alec M. Marshall. “Performance-based seismic design of flexible-base multistorey buildings considering soil–structure interaction.” Engineering Structures 108 (2016): 90–103. [CrossRef] [Google Scholar]
  9. Merritt, Richard George, and George William Housner. “Effect of foundation compliance on earthquake stresses in multistorey buildings.” Bulletin of the Seismological Society of America 44.4 (1954): 551–569. [CrossRef] [Google Scholar]
  10. Dwivedi, Shashi Prakash, Shubham Sharma, B. D. Y. Sunil, Nakul Gupta, Kuldeep K. Saxena, Sayed M. Eldin, Sana Shahab, Mohammed Ayad Alkhafaji, and Sherzod Shukhratovich Abdullaev. “Heat Treatment Behavior of Cr in the Form of Collagen Powder and Al2O3 Reinforced Aluminum-Based Composite Material.” Journal of Materials Research and Technology (2023). [Google Scholar]
  11. GovindaRaju, L., et al. “Site-specific ground response analysis.” Current Science (2004): 1354–1362. [Google Scholar]
  12. Mahmoud, Sayed, Ayman Abd-Elhamed, and Robert Jankowski. “Earthquake-induced pounding between equal height multi-storey buildings considering soil-structure interaction.” Bulletin of Earthquake Engineering 11 (2013): 1021–1048. [CrossRef] [Google Scholar]
  13. Awasthi, A., Saxena, K. K., & Arun, V. (2021). Sustainable and smart metal forming manufacturing process. Materials Today: Proceedings, 44, 2069–2079. [Google Scholar]
  14. Kumar, Ashish, Ravindra Singh Rana, Rajesh Purohit, Anurag Namdev, and Kuldeep K. Saxena. “Optimization of dry sliding wear behavior of Si3N4 and Gr reinforced Al–Zn–Mg–Cu composites using taguchi method.” Journal of Materials Research and Technology 19 (2022): 4793–4803. [CrossRef] [Google Scholar]
  15. Swarna, K. S. V., Vinayagam, A., Ananth, M. B. J., Kumar, P. V., Veerasamy, V., & Radhakrishnan, P. (2022). A KNN based random subspace ensemble classifier for detection and discrimination of high impedance fault in PV integrated power network. Measurement, 187, 110333. [CrossRef] [Google Scholar]
  16. Manohar, T., Prashantha, S. C., Nagaswarupa, H. P., Naik, R., Nagabhushana, H., Anantharaju, K. S., … & Premkumar, H. B. (2017). White light emitting lanthanum aluminate nanophosphor: near ultra violet excited photoluminescence and photometric characteristics. Journal of Luminescence, 190, 279–288. [CrossRef] [Google Scholar]
  17. Thakur, Ashish, Din Bandhu, D. R. Peshwe, Y. Y. Mahajan, Kuldeep K. Saxena, and Sayed M. Eldin. “Appearance of reinforcement, interfacial product, heterogeneous nucleant and grain refiner of MgAl2O4 in aluminium metal matrix composites.” Journal of Materials Research and Technology (2023). [Google Scholar]
  18. Upadhyay, K. K., Srivastava, S., Arun, V., & Shukla, N. K. (2020). Design and performance analysis of all-optical reversible full adder, as ALU. Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, 90, 899–909. [Google Scholar]
  19. Ashwini, S., Prashantha, S. C., Naik, R., & Nagabhushana, H. (2019). Enhancement of luminescence intensity and spectroscopic analysis of Eu3+ activated and Li+ charge-compensated Bi2O3 nanophosphors for solid-state lighting. Journal of Rare Earths, 37(4), 356–364. [CrossRef] [Google Scholar]
  20. Kishore, Kamal, Nakul Gupta, Kuldeep Kumar Saxena, and Jayahari Lade. “Development and characterisation of bacteria as a potential application in enduring the mechanical and durability characteristic of cement composite.” Advances in Materials and Processing Technologies 8, no. sup3 (2022): 1604–1621. [Google Scholar]
  21. Kumar, C. P., Raghu, M. S., Prathibha, B. S., Prashanth, M. K., Kanthimathi, G., Kumar, K. Y., … & Alharthi, F. A. (2021). Discovery of a novel series of substituted quinolines acting as anticancer agents and selective EGFR blocker: Molecular docking study. Bioorganic & Medicinal Chemistry Letters, 44, 128118. [CrossRef] [PubMed] [Google Scholar]
  22. Tripathi, A., & Gupta, H. Assessing Seismic Behavior In Medium And Hard Soil Conditions For A Three-Dimensional Rcc Frame With Different Zone Considerations. [Google Scholar]
  23. Srinivasan, K., Porkumaran, K., & Sainarayanan, G. (2009, August). Improved background subtraction techniques for security in video applications. In 2009 3rd International Conference on Anti-counterfeiting, Security, and Identification in Communication (pp. 114–117). IEEE. [Google Scholar]
  24. Bisht, P. S., & Awasthi, A. (2021). Analysis of E-glass fiber wheel rim by using ANSYS. In Recent Advances in Mechanical Engineering: Select Proceedings of ITME 2019 (pp. 79–91). Springer Singapore. [Google Scholar]
  25. Ghaedi, K., Hejazi, F., Ibrahim, Z., & Khanzaei, P. (2018). Flexible foundation effect on seismic analysis of Roller Compacted Concrete (RCC) dams using finite element method. KSCE Journal of Civil Engineering, 22, 1275–1287. [CrossRef] [Google Scholar]
  26. Gupta, Akash, K. K. Saxena, Ajaya Bharti, Jayahari Lade, Kanwal Chadha, and Prudvi Reddy Paresi. “Influence of ECAP processing temperature and number of passes on hardness and microstructure of Al-6063.” Advances in Materials and Processing Technologies 8, no. sup3 (2022): 1635–1646. [Google Scholar]
  27. Alkorbi, A. S., Kumar, K. Y., Prashanth, M. K., Parashuram, L., Abate, A., Alharti, F. A., … & Raghu, M. S. (2022). Samarium vanadate affixed sulfur self doped g-C3N4 heterojunction; photocatalytic, photoelectrocatalytic hydrogen evolution and dye degradation. International Journal of Hydrogen Energy, 47(26), 12988–13003. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.