EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 511 (2024) E3S Web Conf., 511 (2024) 01014 References
Open Access
Issue
E3S Web Conf.
Volume 511, 2024
International Conference on “Advanced Materials for Green Chemistry and Sustainable Environment” (AMGSE-2024)
Article Number 01014
Number of page(s) 13
DOI https://doi.org/10.1051/e3sconf/202451101014
Published online 10 April 2024
  1. Abdul Kareem, K.S., Parida, B., S, A.A., Al Ghaithi, A., O., Qamhieh, N., Amrane, N., Benkraouda, M., Shengzhong (Frank) Liu and Najar, A. Towards High Performance: Solution-Processed Perovskite Solar Cells with Cu-Doped CH3NH3PbI3. Nanomaterials, 14(2), pp. 172 (2024). [CrossRef] [PubMed] [Google Scholar]
  2. Elmasry, Y., Chaturvedi, R., Ali, A., Mamun, K., Hadrawi, S. K., & Smaisim, G. F. Numerical analysis and RSM modeling of the effect of using a V-cut twisted tape turbulator in the absorber tube of a photovoltaic/thermal system on the energy and exergy performances of the system. Engineering Analysis with Boundary Elements, 155, 340–350 (2023). [CrossRef] [Google Scholar]
  3. Ali, S., Rahmat, M.K. and Mohd Helmy Hakimie, M.R. Organic Solar cells: Recent advances and Challenges. IOP Conference Series.Earth and Environmental Science, 1261(1), pp. 012019 (2023). [Google Scholar]
  4. He, D., Zeng, M., Zhang, Z., Bai, Y., Xing, G., Hui-Ming, C. and Lin, Y. Exciton diffusion and dissociation in organic and quantum-dot solar cells. Smartmat, 4(6) (2023). [CrossRef] [Google Scholar]
  5. Mausam, K., Sharma, A., & Singh, P. K. Calculating stress, temperature in brake pad using ANSYS composite materials. Materials Today: Proceedings, 45, 3547–3550 (2021). [CrossRef] [Google Scholar]
  6. Islam, M.A., Mhd Deb, A.H., S F W Muhammad, H., Norhayati, B.S., Khan, S. and Amin, N. Device Optimization of a Pb-Free All Perovskite Tandem Solar Cell with 29.59% Power Conversion Efficiency. IOP Conference Series.Materials Science and Engineering, 1278(1), pp. 012005 (2023). [CrossRef] [Google Scholar]
  7. Sharma, A., & Dwivedi, V. K. Effect of spindle speed, feed rate and cooling medium on the burr structure of aluminium through milling. In IOP conference series: materials science and engineering (Vol. 998, No. 1, p. 012028). IOP Publishing (2021). [Google Scholar]
  8. Kumar, A., Singh, S., Mohammed, M.K.A. and Ahmed, D.S. Experimental investigation of additive free-low-cost vinyl triarylamines based hole transport material for FAPbI3-based perovskite solar cells to enhance efficiency and stability. Materials Research Express, 10(4), pp. 044003 (2023). [CrossRef] [Google Scholar]
  9. Sharma, T., Singh, S., Sharma, S., Sharma, A., Shukla, A. K., Li, C., ... & Eldin, E. M. T. Studies on the Utilization of Marble Dust, Bagasse Ash, and Paddy Straw Wastes to Improve the Mechanical Characteristics of Unfired Soil Blocks. Sustainability, 14(21), 14522 (2022). [CrossRef] [Google Scholar]
  10. Lee, J., Son, T., Min, K., Park, S., Kim, Y. and Seo, J. Rationally designed hole transporting layer system for efficient and stable perovskite solar cells. EcoMat, 5(11), (2023). [Google Scholar]
  11. Singh, I., Arora, R., Dhiman, H., & Pahwa, R. Carbon quantum dots: Synthesis, characterization and biomedical applications. Turk. J. Pharm. Sci, 15(2), 219–230 (2018). [CrossRef] [Google Scholar]
  12. Li, Y., Shi, Y., Wang, H., Liu, T., Zheng, X., Gao, S. and Lu, J. Recent advances in carbon-based materials for solar-driven interfacial photothermal conversion water evaporation: Assemblies, structures, applications, and prospective. Carbon Energy, 5(11), (2023). [Google Scholar]
  13. P. B. Joshi, N. C. Durve1 and C. Mohan, “Full blown green metrics”, Elsevier Publishing, pp 109–129 (2024). doi : 10.1016/B978-0-443-18959-3.00013-6 [Google Scholar]
  14. Majumdar, S., Mondal, A., Mahajan, A., Bhattacharya, S.K. and Ray, R. Dye-sensitized solar cell employing chitosan-based biopolymer electrolyte. IOP Conference Series.Materials Science and Engineering, 1291(1), pp. 012014 (2023). [CrossRef] [Google Scholar]
  15. C. Mohan, N. Kumari, “Effect of various types of naturally occurring clay minerals on mechanical and thermal properties of PMMA polymer composite films” MRS Advances, vol. 7, pp 933–938, (2022). doi : 10.1557/s43580-022-00347-7 [CrossRef] [Google Scholar]
  16. Bati, A.S.R., Zhong, Y.L., Burn, P.L., Nazeeruddin, M.K., Shaw, P.E. and Batmunkh, M. Next-generation applications for integrated perovskite solar cells. Communications Materials, 4(1), pp. 2 (2022). [Google Scholar]
  17. Sharma, A., & Dwivedi, V. K. Effect of spindle speed, feed rate and cooling medium on the burr structure of aluminium through milling. In IOP conference series: materials science and engineering (Vol. 998, No. 1, p. 012028). IOP Publishing (2020). [CrossRef] [Google Scholar]
  18. Bojar, A., Micha, D., Giteau, M., Ruiz-Preciado, M., Paetzold, U.W., Simor, M., Gevaerts, V.S., Carron, R., Medjoubi, K., Collin, S., Naghavi, N., JEAN-FRANÇOIS Guillemoles and Schulz, P. Optical simulations and optimization of perovskite/CI(G)S tandem solar cells using the transfer matrix method. JPhys Energy, 5(3), pp. 035001 (2023). [CrossRef] [Google Scholar]
  19. Sharma, T., Singh, S., Sharma, S., Sharma, A., Shukla, A. K., Li, C., ... & Eldin, E. M. T. Studies on the Utilization of Marble Dust, Bagasse Ash, and Paddy Straw Wastes to Improve the Mechanical Characteristics of Unfired Soil Blocks. Sustainability, 14(21), 14522 (2022). [CrossRef] [Google Scholar]
  20. Chen, J., Liu, Y., Chen, F., Guo, M., Zhou, J., Fu, P., Zhang, X., Wang, X., Wang, H., Hua, W., Chen, J., Hu, J., Mao, Y., Jin, D. and Bu, W. Non-Faradaic optoelectrodes for safe electrical neuromodulation. Nature Communications, 15(1), pp. 405 (2024). [CrossRef] [PubMed] [Google Scholar]
  21. Yan, G., Shawabkeh, A., Chaturvedi, R., Nur-Firyal, R., & Youshanlouei, M. M. Using MHD free convection to receive the generated heat by an elliptical porous media. Case Studies in Thermal Engineering, 36, 102153 (2022). [CrossRef] [Google Scholar]
  22. Cuadra, L., Salcedo-Sanz, S. and Nieto-Borge, J. Carrier Transport in Colloidal Quantum Dot Intermediate Band Solar Cell Materials Using Network Science. International Journal of Molecular Sciences, 24(4), pp. 3797 (2023). [CrossRef] [PubMed] [Google Scholar]
  23. Hai, T., Ali, M. A., Chaturvedi, R., Almojil, S. F., Almohana, A. I., Alali, A. F., ... & Shamseldin, M. A. A low-temperature driven organic Rankine cycle for waste heat recovery from a geothermal driven Kalina cycle: 4E analysis and optimization based on artificial intelligence. Sustainable Energy Technologies and Assessments, 55, 102895 (2023). [CrossRef] [Google Scholar]
  24. Faremi, A.A., Olubosede, O., Salau, A.O., Adigbo, S.O., Olubambi, P.A. and Lawan, E. Variability of temperature on the electrical properties of heterostructured CIS/Cds through SCAPS simulation for photovoltaic applications. Materials for Renewable and Sustainable Energy, 12(3), pp. 235–246 (2023). [CrossRef] [Google Scholar]
  25. Chaturvedi, R., & Singh, P. K. A practicable learning under conversion of plastic waste and building material waste keen on concrete tiles. Materials Today: Proceedings, 45, 2938–2942 (2021). [CrossRef] [Google Scholar]
  26. Mukhtar, M., Bilal, M., Rahdar, A., Barani, M., Arshad, R., Behl, T., ... & Bungau, S. Nanomaterials for diagnosis and treatment of brain cancer: Recent updates. Chemosensors, 8(4), 117 (2020). [CrossRef] [Google Scholar]
  27. Muhammad, A.A., Ciampi, G. and Sibilio, S. Novel Materials for SemiTransparent Organic Solar Cells. Energies, 17(2), pp. 333 (2024). [CrossRef] [Google Scholar]
  28. Grewal, A. K., Singh, T. G., Sharma, D., Sharma, V., Singh, M., Rahman, M. H., ... & Abdel-Daim, M. M. Mechanistic insights and perspectives involved in neuroprotective action of quercetin. Biomedicine & Pharmacotherapy, 140, 111729 (2021). [CrossRef] [Google Scholar]
  29. Nkele, A.C., Offiah, S.U., Chime, C.P. and Ezema, F.I. Review on advanced nanomaterials for hydrogen production. IOP Conference Series.Earth and Environmental Science, 1178(1), pp. 012001 (2023). [CrossRef] [Google Scholar]
  30. N.I. Vatin, G.S. Negi, S.V. Yellanki, C. Mohan, N. Singla, “Sustainability Measures: An Experimental Analysis of AI and Big Data Insights in Industry 5.0” BIO Web of Conferences, vol. 86, pp 01072, (2024). doi : 10.1051/bioconf/20248601072 [CrossRef] [EDP Sciences] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.