EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 511 (2024) E3S Web Conf., 511 (2024) 01016 References
Open Access
Issue
E3S Web Conf.
Volume 511, 2024
International Conference on “Advanced Materials for Green Chemistry and Sustainable Environment” (AMGSE-2024)
Article Number 01016
Number of page(s) 12
DOI https://doi.org/10.1051/e3sconf/202451101016
Published online 10 April 2024
  1. A technical review on epoxy-nanoclay nanocomposites: Mechanical, hygrothermal and wear properties. Cogent Engineering, 10(2), (2023). [Google Scholar]
  2. Adeboye, S.A., Adebowale, A.D., Siyanbola, T. and Ajanaku, K. Coatings and the environment: a review of problems, progress and prospects. IOP Conference Series.Earth and Environmental Science, 1197(1), pp. 012012 (2023). [CrossRef] [Google Scholar]
  3. Gupta, A., Shah, K., Oza, M. J., & Behl, T. Reactivation of p53 gene by MDM2 inhibitors: a novel therapy for cancer treatment. Biomedicine & Pharmacotherapy, 109, 484–492 (2019). [CrossRef] [Google Scholar]
  4. Darshana, U.B., Horti, N.C. and Kamatagi, M.D. Photoluminescence Properties of Polythiophene/Tin Oxide (PTh/SnO2) Polymer Nanocomposites. Journal of Physics: Conference Series, 2603(1), pp. 012001 (2023). [CrossRef] [Google Scholar]
  5. Al‐Muntaser, A. A., Pashameah, R. A., Sharma, K., Alzahrani, E., & Tarabiah, A. E. Reinforcement of structural, optical, electrical, and dielectric characteristics of CMC/PVA based on GNP/ZnO hybrid nanofiller: nanocomposites materials for energy‐storage applications. International Journal of Energy Research, 46(15), 23984–23995 (2022). [CrossRef] [Google Scholar]
  6. Durgam, M.N., Jeyanthi, S., Rajamanickam, S.K., Balajivasan, R.J., Harshavardhan, R., Senthil Muthu, K.T., Hashem, M., Fouad, H., Ansari, A. and Bhat, I.U.H.. Biopolymer-coated composites for enhanced dielectric and electromagnetic interference shielding applications a green initiative. Materials Research Express, 10(10), pp. 105013 (2023). [CrossRef] [Google Scholar]
  7. GajeviĆ, S., KrstiĆ, J., MiladinoviĆ, S., BlagojeviĆ, J. and StojanoviĆ, B.. Polymer matrix nanocomposites from the ecological aspect in the automotive industry. IOP Conference Series.Materials Science and Engineering, 1271(1), pp. 012012 (2022). [CrossRef] [Google Scholar]
  8. Sun, J., Yan, G., Abed, A. M., Sharma, A., Gangadevi, R., Eldin, S. M., & Taghavi, M. Evaluation and optimization of a new energy cycle based on geothermal wells, liquefied natural gas and solar thermal energy. Process Safety and Environmental Protection, 168, 544–557 (2022). [CrossRef] [Google Scholar]
  9. GÜRSES, A. and GÜNEŞ, K.. Preparation of Polyethylene Clay Composites via Melt Intercalation Using Hydrophobic and Superhydrophobic Organoclays and Comparison of Their Textural, Mechanical and Thermal Properties. Polymers, 16(2), pp. 272 (2024). [CrossRef] [PubMed] [Google Scholar]
  10. Hadiyeva, A.A., Mammadova, S. and Mahmudzade, L.R.. Influence of electric field on the thermal properties of PP+NC nanocomposites for environmental chemistry application. IOP Conference Series.Earth and Environmental Science, 1236(1), pp. 012005 (2023). [CrossRef] [Google Scholar]
  11. Hafiz, M.I., Abbas, S.H., Raza, K., Baroud, T.N., Muhammad, A.E., Ali, S. and Muhammad, S.T.. Design, Development and Evaluation of Thermal Properties of Polysulphone–CNT/GNP Nanocomposites. Nanomaterials, 11(8), pp. 2080 (2021). [CrossRef] [PubMed] [Google Scholar]
  12. P. B. Joshi, N. C. Durve1 and C. Mohan, “Full blown green metrics”, Elsevier Publishing, pp 109–129, (2024). doi : 10.1016/B978-0-443-18959-3.00013-6 [Google Scholar]
  13. Jeon, H., Na, C., Kwac, L.K., Kim, H.G. and Chang, J. Effects of various types of organo-mica on the physical properties of polyimide nanocomposites. Scientific Reports (Nature Publisher Group), 14(1), pp. 655 (2024). [CrossRef] [Google Scholar]
  14. Kalendova, A., Kupkova, J., Urbaskova, M. and Merinska, D.. Applications of Clays in Nanocomposites and Ceramics. Minerals, 14(1), pp. 93 (2024). [CrossRef] [Google Scholar]
  15. Wang, Hao, et al. “Thermodynamic investigation of a single flash geothermal power plant powered by carbon dioxide transcritical recovery cycle.” Alexandria Engineering Journal 64, 441–450 (2024). [Google Scholar]
  16. Grewal, A. K., Singh, T. G., Sharma, D., Sharma, V., Singh, M., Rahman, M. H., ... & Abdel-Daim, M. M. Mechanistic insights and perspectives involved in neuroprotective action of quercetin. Biomedicine & Pharmacotherapy, 140, 111729 (2021). [CrossRef] [Google Scholar]
  17. BaŞBoĞA, H.I. Polypropylene-based composites reinforced with waste tropic wood flours: Determination of accelerated weathering resistance, tribological, and thermal properties. BioResources, 18(4), pp. 7251–7294 (2021). [Google Scholar]
  18. Mukhtar, M., Bilal, M., Rahdar, A., Barani, M., Arshad, R., Behl, T., ... & Bungau, S. Nanomaterials for diagnosis and treatment of brain cancer: Recent updates. Chemosensors, 8(4), 117 (2020). [CrossRef] [Google Scholar]
  19. Liu, Z., Zhanguo, S. U., Abed, A. M., Chaturvedi, R., Feyzbaxsh, M., & Salavat, A. K. A comparative thermodynamic and exergoeconomic scrutiny of four geothermal systems with various configurations of TEG and HDH unit implementations. Applied Thermal Engineering, 216, 119094 (2022). [CrossRef] [Google Scholar]
  20. N.I. Vatin, G.S. Negi, S.V. Yellanki, C. Mohan, N. Singla, “Sustainability Measures: An Experimental Analysis of AI and Big Data Insights in Industry 5.0” BIO Web of Conferences, vol. 86, pp 01072, (2024). doi : 10.1051/bioconf/20248601072 [CrossRef] [EDP Sciences] [Google Scholar]
  21. Cazan, C., Enesca, A. and Andronic, L. Synergic Effect of TiO2 Filler on the Mechanical Properties of Polymer Nanocomposites. Polymers, 13(12), pp. 2017 (2021). [CrossRef] [PubMed] [Google Scholar]
  22. Chika, O.U., Daramy Vandi, V.K. and Victor, S.A. Tribological Properties of CNTs-Reinforced Nano Composite Materials. Lubricants, 11(3), pp. 95 (2023). [CrossRef] [Google Scholar]
  23. Chen, Y., Feng, L., Mansir, I. B., Taghavi, M., & Sharma, K. A new coupled energy system consisting of fuel cell, solar thermal collector, and organic Rankine cycle; generation and storing of electrical energy. Sustainable Cities and Society, 81, 103824 (2022). [CrossRef] [Google Scholar]
  24. N. Kumari, C. Mohan, A. Negi, “An Investigative Study on the Thermal and Mechanical Properties of Clay PVC Polymer Composite Films” MDPI-Polymers, vol. 15, pp 1922, (2023). doi : 10.3390/polym15081922 [CrossRef] [Google Scholar]
  25. Jamróz, E., Kulawik, P., & Kopel, P. The effect of nanofillers on the functional properties of Biopolymer-Based Films: a review. Polymers, 11(4), 675 (2019). https://doi.org/10.3390/polym11040675 [CrossRef] [PubMed] [Google Scholar]
  26. Kausar, A., Ishaq, A., Eisa, M.H. and Maaza, M. Graphene Nanocomposites in Space Sector—Fundamentals and Advancements. C, 9(1), pp. 29 (2023). [Google Scholar]
  27. Kausar, A., Ishaq, A., Zhao, T., Aldaghri, O. and Eisa, M.H. Polymer/Graphene Nanocomposites via 3D and 4D Printing—Design and Technical Potential. Processes, 11(3), pp. 868 (2023). [CrossRef] [Google Scholar]
  28. Krzykowska, B., Czerniecka-Kubicka, A., BiaŁKowska, A., Bakar, M., HĘCLIK, K., Dobrowolski, L., Longosz, M. and Zarzyka, I. Polymer Biocompositions and Nanobiocomposites Based on P3HB with Polyurethane and Montmorillonite. International Journal of Molecular Sciences, 24(24), pp. 17405 (2023). [CrossRef] [PubMed] [Google Scholar]
  29. P. B. Joshi, N. C. Durve1 and C. Mohan, “Full blown green metrics”, Elsevier Publishing, pp 109–129, (2024). doi : 10.1016/B978-0-443-18959-3.00013-6 [Google Scholar]
  30. N.I. Vatin, G.S. Negi, S.V. Yellanki, C. Mohan, N. Singla, “Sustainability Measures: An Experimental Analysis of AI and Big Data Insights in Industry 5.0” BIO Web of Conferences, vol. 86, pp 01072, (2024). doi : 10.1051/bioconf/20248601072 [CrossRef] [EDP Sciences] [Google Scholar]
  31. M. Kumar, C. Mohan, S. Kumar, K. Epifantsev, V. Singh et al., “Coordination behavior of Schiff base copper complexes and structural characterization” MRS Advances, vol. 7, pp 939–943, (2022). doi : 10.1557/s43580-022-00348-6 [CrossRef] [Google Scholar]
  32. Li, C., Nie, Y., Zhan, H., Bai, J., Liu, T., & Gu, Y. Mechanical properties of polymer nanocomposites with randomly dispersed and cross-linked two-dimensional diamond. Composites Science and Technology, 230, 109722 (2022). https://doi.org/10.1016/j.compscitech.2022.109722 [CrossRef] [Google Scholar]
  33. Kausar, A., Ahmad, I., Mâaza, M., & Bocchetta, P. Self-Healing Nanocomposites—Advancements and aerospace applications. Journal of Composites Science, 7(4), 148 (2023). https://doi.org/10.3390/jcs7040148. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.