Open Access
| Issue |
E3S Web of Conf.
Volume 517, 2024
The 10th International Conference on Engineering, Technology, and Industrial Application (ICETIA 2023)
|
|
|---|---|---|
| Article Number | 13001 | |
| Number of page(s) | 4 | |
| Section | Mechanics | |
| DOI | https://doi.org/10.1051/e3sconf/202451713001 | |
| Published online | 15 April 2024 | |
- C. Feng and C. Pang, Research on Vibration of Mechanical System Based on MATLAB, J Phys Conf Ser, 2195, 1 (2022) [Google Scholar]
- L. Yao, Y. Wang, Z. Zeng, and J. Kan, Vibration analysis and optimization of a vertical disc stump grinder, Advances in Mechanical Engineering, 10, 2. (2018) [Google Scholar]
- K. Ikeda et al., Basic Study on Mechanical Vibration Suppression System Using 2-Degree-of-Freedom Vibration Analysis, Vibration, 6, 2, 407–420 (2023) [CrossRef] [Google Scholar]
- M. Ansari, F. Tartaglione, and C. Koenke, Experimental Validation of Dynamic Response of Small-Scale Metaconcrete Beams at Resonance Vibration, Materials, 16,. 14 (2023) [Google Scholar]
- R. Markert and M. Seidler, Analytically based estimation of the maximum amplitude during passage through resonance, Int J Solids Struct, 38, 10–13, 1975–1992, 2001 [CrossRef] [Google Scholar]
- R. Abbate, M. Caterino, M. Fera, and F. Caputo, Maintenance Digital Twin using vibration data, in Procedia Computer Science, Elsevier B.V. 546–555 (2022) [Google Scholar]
- Shinya Kijimoto, Akio Nagamatsu, Kazuto Seto, and Youichi Kanemitsu, Vibration Control of the Structure with an Active Mechanical Component (1990) [Google Scholar]
- S. Yamasaki and S. Nishiwaki, Structural Optimization of Mechanical Structures Targeting Vibration Characteristics Based on the Level Set Method (2008) [Google Scholar]
- V. Y. Myasnikov and I. I. Ivanov, Method of engine structural frame vibrations analysis during fan blade- out, IOP Conf Ser Mater Sci Eng, 489, 1 (2019) [Google Scholar]
- O. Outassafte, A. Adri, Y. El Khouddar, S. Rifai, and R. Benamar, Geometrically non-linear free and forced vibration of a shallow arch, Journal of Vibroengineering, 23, 7, 1508–1523 (2021) [CrossRef] [Google Scholar]
- Jr. Robert F. Steidel, An Introduction to Mechanical Vibrations (1991) [Google Scholar]
- Hisayoshi Sekiguchi and Toshihiko Asami, Theory of Vibration Isolation of a System with Two Degrees of Freedom, (1984) [Google Scholar]
- H. Kumano and E. Shimizu, Analysis of Steady Impact Vibration in Spring-Mass System for Two- Degree of Freedom Having Collision Characteristics of Hysteresis Loop (2008) [Google Scholar]
- C. Mrad, K. Chehaibi, A. Nasr, and R. Nasri, Modeling effect on the performance of impact and friction vibration absorbers, Mechanics and Industry, 18, 2, (2017) [Google Scholar]
- Satoshi Honda, Akio Nagamatsu, and Sideo Suzuki, Effect of Dynamic Absorber with Vibration Intensity (1993) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.