EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 522 (2024) E3S Web Conf., 522 (2024) 01024 References
Open Access
Issue
E3S Web Conf.
Volume 522, 2024
2023 9th International Symposium on Vehicle Emission Supervision and Environment Protection (VESEP2023)
Article Number 01024
Number of page(s) 10
DOI https://doi.org/10.1051/e3sconf/202452201024
Published online 07 May 2024
  1. W. Zhu, Q. Xie, X. Liu, B. Mao, Z. Xue, “Towards 500 kV power transformers damaged in the 2022 Luding earthquake: field investigation, failure analysis and seismic retrofitting,” Natural Hazards, 2024. https://doi.org/10.1007/s11069-024-06476-6 (Online). [Google Scholar]
  2. W. Zhu, Q. Xie, “Post-earthquake rapid assessment for loop system in substation using ground motion signals,” Mechanical Systems and Signal Processing, vol. 208, pp. 111058, 2024, [CrossRef] [Google Scholar]
  3. C. He, Z. He, W. Zhu, “Seismic interconnecting effects of multi-span flexible conductor-post electrical equipment coupling system,” Journal of Constructional Steel Research, vol. 212, pp. 108209, 2024, [CrossRef] [Google Scholar]
  4. W. Zhu, Q. Xie, and X. Liu, “Seismic failure risk analysis of ±800 kV coupling filter circuit considering material strength deviation,” Structures, vol. 47, pp. 1566–1578, 2023. [CrossRef] [Google Scholar]
  5. T. Okada, T. Misaki, Y. Hashimoto, T. Momotari, K. Saito, N. Ito, Y. Takahashi, “Seismic design of connecting leads in open-air type substations,” International Conference on Large High Voltage Electric Systems, Paris, France, August, 1986. [Google Scholar]
  6. Q. Xie, Y. Wang, “Shake-table Test on Earthquake Simulation of Substation Equipment Interconnected by Flexible Bus,” Proceedings of the CSEE. Vol. 31, pp. 112-118, 2011, [Google Scholar]
  7. Y. Yu, G. Li, P. Li, “Investigation and analysis of electric equipment damage in Sichuan power grid caused by Wenchuan earthquake,” Power System Technology, vol. 32, pp. 1–6, 2008, [Google Scholar]
  8. H. He, J. Guo, Q. Xie, “Vulnerability analysis of power equipment caused by earthquake disaster,” Power System Technology, vol. 35, pp. 25–28, 2011, [Google Scholar]
  9. J. B. Dastous, J. Y. Paquin, “Testing and development of alternative flexible-bus geometries for interconnected substation equipment subjected to earthquakes,” IEEE Transactions on Power Delivery, vol. 18, pp. 772–780, 2003. [CrossRef] [Google Scholar]
  10. C. He, Q. Xie, L. Jiang, L. Jiang, Z. Yang, “Numerical model of large spatial deflections of bundled conductors in electrical substations,” International Journal of Mechanics and Materials in Design, vol. 18, pp. 223–242, 2022. [CrossRef] [Google Scholar]
  11. W. Zhu, M. Wu, Q. Xie, J. Xu, “Floor response spectra and seismic design method of electrical equipment installed on floor in indoor substation,” Soil Dynamics and Earthquake Engineering, vol. 173, pp. 108138, 2023. [CrossRef] [Google Scholar]
  12. W. Zhu, M. Wu, Q. Xie, Y. Chen, “Post-earthquake rapid assessment method for electrical function of equipment in substations,” IEEE Transactions on Power Delivery, vol. 38, pp. 3312–3321, 2023. [CrossRef] [Google Scholar]
  13. G. S. Bhuyan, E. Zhai, H. Ghalibafian, C. Ventura, D. Borthwick, R. P. Stewart, J. H. Rainer, “Seismic behavior of flexible conductors connecting substation equipment, part I: static and dynamic properties of individual components,” IEEE Transactions on Power Delivery, vol. 19, pp. 1673–1679, 2004. [CrossRef] [Google Scholar]
  14. H. Ghalibafian, G. S. Bhuyan, C. Ventura, J. H. Rainer, D. Borthwick, R. P. Stewart, E. Zhai, “Seismic behavior of flexible conductors connecting substation equipment, part II: shake table test,” IEEE Transactions on Power Delivery, vol. 19, pp. 1680–1687, 2004. [CrossRef] [Google Scholar]
  15. Q. Xie, Y. Wang, S. Wei, “Cause analysis of damage of flexible-busbar-connected switchgears under earthquake,” Electrical Power Construction, vol. 2009, pp. 10–14, 2009. [Google Scholar]
  16. Y. Hu, Q. Xie, “Seismic vulnerability of substation equipment interconnected by rigid bus,” Electrical Power Construction, vol. 2010, pp. 22–28, 2010. [Google Scholar]
  17. A. Kiureghian, J. Sackman, K. Hong, “Seismic interaction in linearly connected electrical substation equipment,” Earthquake Engineering and Structural Dynamics, vol. 30, pp. 327–347, 2001. [CrossRef] [Google Scholar]
  18. R. K. Mohammadi, F. Nikfar, V. Akrami, “Estimation of required slack for conductors connecting substation equipment subjected to earthquake,” IEEE Transactions on Power Delivery, vol. 27, pp. 709–717, 2012. [CrossRef] [Google Scholar]
  19. Y. Li, X. Li, “Influences of conductor buses on seismic responses of electrical equipment with ceramic bushings,” Earthquake Engineering and Engineering Dynamics, vol. 24, pp. 127–130, 2004. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.