EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 544 (2024) E3S Web of Conf., 544 (2024) 01017 References
Open Access
Issue
E3S Web of Conf.
Volume 544, 2024
8th International Symposium on Deformation Characteristics of Geomaterials (IS-Porto 2023)
Article Number 01017
Number of page(s) 7
Section Experimental Investigations From Very Small Strains to Beyond Failure - Advances in Laboratory Testing Techniques (Equipment and Procedures)
DOI https://doi.org/10.1051/e3sconf/202454401017
Published online 02 July 2024
  1. Attia, T.; Di Benedetto, H.; Sauzeat, C., and Pouget S., 2020. “2T3C HCA, a New Hollow Cylinder Device Using Digital Image Correlation to Measure Properties of Interfaces between Asphalt Layers”. Constr Build Mat., 247, 118499 https://doi.org/10.1016/j.conbuildmat.2020.118499 [Google Scholar]
  2. Attia, T.; Di Benedetto, H.; Sauzeat, C.; and Pouget S. 2021. “Behaviour of an Interface between Pavement Layers Obtained Using Digital Image Correlation”. Mater. Struct. 54 (38): 1–14, https://doi.org/10.1617/s11527-022-01903-1 [CrossRef] [Google Scholar]
  3. Canestrari, F.; G., Ferrotti; X., Lu; A., Millien; M. N. Partl; C., Petit; A., Phelipot-Mardele; H. Piber & C.; Raab. 2013. “9th RILEM State-of-the-Art Reports Mechanical Testing of Interlayer Bonding in Asphalt Pavements”, RILEM, https://doi.org/10.1007/978-94-007-5104-0_6 [Google Scholar]
  4. Canestrari, F.; Gilda F.; and Graziani, A, 2016. “Shear Failure Characterization of Time–Temperature Sensitive Interfaces”. Mech. Time Depend. Mater. 20(3): 405–19. https://doi.org/10.1007/s11043-016-9299-7 [CrossRef] [Google Scholar]
  5. Diakhate, M. et al, 2011. “Experimental Investigation of Tack Coat Fatigue Performance: Towards an Improved Lifetime Assessment of Pavement Structure Interfaces”. Constr. Build Mater. 25(2): 1123–33. https://doi.org/10.1016/j.conbuildmat.2010.06.064 [CrossRef] [Google Scholar]
  6. Graziani, A.; Canestrari, F.; Cardone, F.; and Ferrotti G.2017. “Time–Temperature Superposition Principle for Interlayer Shear Strength of Bituminous Pavements”. Road Mater. Pavement Des. 18(March): 12–25. https://doi.org/10.1080/14680629.2017.1304247 [Google Scholar]
  7. Isailović, I.; Cannone Falchetto, A.; and Wistuba, M., 2017. “Fatigue Investigation on Asphalt Mixture Layers’ Interface”. Road Mater. and Pavement Des. 18: 514–34. https://doi.org/10.1080/14680629.2017.1389087 [Google Scholar]
  8. Isailović, I.; and Wistuba, M, 2018. “Asphalt Mixture Layers’ Interface Bonding Properties under Monotonic and Cyclic Loading”. Constr. Build. Mater. 168: 590–97. https://doi.org/10.1016/j.conbuildmat.2018.02.149 [Google Scholar]
  9. Ktari, R; Fouchal, F.; Millien, A.; and Petit, C. 2017. Surface Roughness: A Key Parameter in Pavement Interface Design. European Journal of Environmental and Civil Engineering 21(March): s27–42. [Google Scholar]
  10. Petit, C. et al 2019. “Pavement Design for Curved Road Sections: Fatigue Performance of Interfaces and Longitudinal Top-down Cracking in Multilayered Pavements”. Road Mater. Pavement Des. 10(3): 609–24. https://doi.org/10.3166/rmpd.10.609-624 [Google Scholar]
  11. Raab, C.; Norbert Partl, M.; and Halim, Abd El. “Evaluation of Interlayer Shear Bond Devices for Asphalt Pavements”. Balt. J. Road Bridge Eng. 4(4): 186–95, 2009, http://doi.org/10.3846/1822-427X.2009.4.186-195 [CrossRef] [Google Scholar]
  12. Raab, C.; Norbert Partl. “Interlayer bonding of binder, base and subbase layers of asphalt pavements: Long-term performance”. Constr Build Mater., 23 (2009), 2926–2931, 2009, http://doi.org/10.1016/j.conbuildmat.2009.02.025 [CrossRef] [Google Scholar]
  13. Ragni, D.; Ferrotti, G.; Petit, C.; and Francesco Canestrari. 2020. “Analysis of Shear-Torque Fatigue Test for Bituminous Pavement Interlayers”. Constr. Build. Mater. 254: 119309, 2020. https://doi.org/10.1016/j.conbuildmat.2020.119309 [Google Scholar]
  14. Ragni D.; Sudarsanan, N.; Canestrari, F.; and Kim, Y. R. “Investigation into Fatigue Life of Interface Bond between Asphalt Concrete Layers”. Int. J. Pavement Eng. 0(0): 1– 15. https://doi.org/10.1080/10298436.2021.1894420 [Google Scholar]
  15. Sayao, A., and Vaid. Y. P. 1991. “Critical Assessment of Stress Nonuniformities in Hollow Cylinder Test Specimens”. Soils Found. 31(1): 60–72, (1991). https://doi.org/10.3208/sandf1972.31.60 [CrossRef] [Google Scholar]
  16. Tran, T.N.; Mangiafico, S.; Sauzeat, C.; Di Benedetto, H. 2022a. “Bituminous Interlayers Thermomechanical Behaviour under Small Shear Strain Loading Cycles with 2T3C Apparatus: Hollow Cylinder and Digital Image Correlation”. In Eng. Proc. 17, 26. https://doi.org/10.3390/engproc2022017026 [Google Scholar]
  17. Tran, T.N.; Mangiafico, S; Sauzeat, C.; Di Benedetto, H. (2022b). “Characterization of interface between bituminous layers under shear loading cycles using 2T3C apparatus”. In the Eleventh International Conference on the Bearing Capacity of Roads, Railways and Airfields, Trondheim, Norway, Volume 2: 477–486. http://doi.org/10.1201/9781003222897-44. [Google Scholar]
  18. Tran, T.N.; Mangiafico, S; Attia, T.; Sauzeat, C.; Di Benedetto, H (2023), “Linear and nonlinear thermomechanical behaviour of interface between bituminous mixtures layers: results from 2T3C apparatus and modelling”. Road Mater. Pavement Des. https://doi.org/10.1080/14680629.2023.2181009 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.