EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 544 (2024) E3S Web of Conf., 544 (2024) 02002 References
Open Access
Issue
E3S Web of Conf.
Volume 544, 2024
8th International Symposium on Deformation Characteristics of Geomaterials (IS-Porto 2023)
Article Number 02002
Number of page(s) 8
Section Experimental Investigations From Very Small Strains to Beyond Failure - Advances in Field Testing and Monitoring Techniques
DOI https://doi.org/10.1051/e3sconf/202454402002
Published online 02 July 2024
  1. Andersen, K. H. 2015. “Cyclic soil parameters for offshore foundation design.” In Frontiers in offshore geotechnics III, ISFOG 2015, edited by V. Meyer, 5–82. Taylor & Francis. ASTM D6635–15 2015. “Standard Test Method for Performing the Flat Plate Dilatometer”, ASTM International, West Conshohocken, PA, USA. [Google Scholar]
  2. Gundersen, A. S., Hansen, R. C., Lunne, T., L’Heureux, J-S., and Strandvik, S.O. 2019. “Characterization and engineering properties of the NGTS Onsoy soft clay site.” AIMS Geosciences 5, no. 3: 665–703. https://doi.org/10.3934/geosci.2019.3.665 [CrossRef] [Google Scholar]
  3. ISO 22476-11:2017(E) 2017. “Geotechnical Investigation and Testing – Field Testing – Part 11: Flat Dilatometer Test”, International Organization for Standardization, Geneva, Switzerland. [Google Scholar]
  4. Karlsrud, K., Lunne, T., Kort, D. A., and Strandvik, S. 2005. “CPTU correlations for clays.” In Proc. 16th ICSMGE, Osaka, 693–702. Millpress. https://doi.org/10.3233/978-1-61499-656-9-693 [Google Scholar]
  5. Lacasse, S., and Lunne, T. 1989. “Calibration of dilatometer correlations.” Norwegian Geotechnical Institute, Publication no. 177. [Google Scholar]
  6. L’Heureux, J-S., and Long, M. 2017. “Relationship between shear-wave velocity and geotechnical parameters for Norwegian clays.” J. Geotech. Geoenviron. Eng. 143, no. 6: 04017013. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001645 [CrossRef] [Google Scholar]
  7. L’Heureux, J-S., and Lunne, T. 2020. “Characterization and engineering properties of natural soils used for geotesting.” AIMS Geosciences 6, no. 1: 35–53. https://doi.org/10.3934/geosci.2020004 [CrossRef] [Google Scholar]
  8. Lunne, T., Long, M., and Forsberg, C. F. 2003. “Characterization and engineering properties of Onsoy clay.” In Characterization and engineering properties of natural soils, edited by T.S. Tan, et al., 395–427. Balkema. [Google Scholar]
  9. Marchetti, D., Danziger, F., and Jannuzzi, G. M. F. 2021. “Comparison of DMT results using traditional pneumatic equipment and the Medusa DMT in the Sarapui II soft clay deposit in Brazil.” In Proc. 6th Int. Conf. on Geotechnical and Geophysical Site Characterisation ISC’6, Budapest. https://doi.org/10.53243/ISC2020-350 [Google Scholar]
  10. Marchetti, D. 2018. “Dilatometer and Seismic Dilatometer Testing Offshore: Available Experience and New [Google Scholar]
  11. Developments.” Geotech. Testing J. 41, no. 5, 967–977. https://doi.org/10.1520/GTJ20170378 [Google Scholar]
  12. Marchetti, D., Monaco, P., Amoroso, S., and Minarelli, L. 2019. “In situ tests by Medusa DMT.” In Proc. XVII ECSMGE-2019, Reykjavik. https://doi.org/10.32075/17ECSMGE-2019-0657 [Google Scholar]
  13. Marchetti, D., Monaco, P., Totani, G., Totani, F., and Amoroso, S. 2022. “Comparisons CPT-DMT in soft clay at Fucino-Telespazio GeoTest site.” In Cone Penetration Testing 2022, edited by G. Gottardi, and L. Tonni, 190–196. CRC Press/Balkema. https://doi.org/10.1201/9781003308829-21 [Google Scholar]
  14. Marchetti, S. 1980. “In Situ Tests by Flat Dilatometer.” J. Geotech. Eng. Div. 106, no. GT3: 299–321. [CrossRef] [Google Scholar]
  15. Marchetti, S., and Crapps, D. K. 1981. “Flat Dilatometer Manual.” Internal Report G.P.E. Inc., Gainesville, FL, USA. [Google Scholar]
  16. Marchetti, S., Monaco, P., Totani, G., and Calabrese, M. 2001. “The Flat Dilatometer Test (DMT) in Soil Investigations – A Report by the ISSMGE Committee TC16.” In Proc. Int. Conf. Insitu Measurement of Soil Properties and Case Histories, Bali, 95–131. Official version approved by ISSMGE TC16 reprinted in Proc. 2nd Int. Conf. Flat Dilatometer, Washington, 2006, 7–48. [Google Scholar]
  17. Marchetti, S., Monaco, P., Totani, G., and Marchetti, D. 2008. “In Situ Tests by Seismic Dilatometer (SDMT).” Geotechnical Special Publication GSP 180, 292–311. https://doi.org/10.1061/40962(325)7 [Google Scholar]
  18. Marchetti, S., and Totani, G. 1989. “Ch Evaluations from DMTA Dissipation Curves.” In Proc. 12th ICSMFE, Rio de Janeiro, 281–286. Balkema. [Google Scholar]
  19. Mayne, P., and Kulhawy, F. H. 1982. “K0-OCR relationships in soil.” J. Geotech. Eng. Div. 108, no. GT6: 851–872. [CrossRef] [Google Scholar]
  20. Monaco, P., Chiaradonna, A., Marchetti, D., Amoroso, S., and Le, T. M. H. 2023. “GEOLAB – Transnational Access project JELLYFISh – Field testing of Medusa DMT. “ (Version 0) [Data set]. Zenodo. https://doi.org/10.5281/zenodo.7695740 [Google Scholar]
  21. Monaco, P., Marchetti, D., Totani, G., Totani, F., and Amoroso, S. 2022. “Validation of Medusa DMT test procedures in Fucino clay.” In Proc. 20th ICSMGE, Sydney. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.