EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 544 (2024) E3S Web of Conf., 544 (2024) 11013 References
Open Access
Issue
E3S Web of Conf.
Volume 544, 2024
8th International Symposium on Deformation Characteristics of Geomaterials (IS-Porto 2023)
Article Number 11013
Number of page(s) 7
Section Behaviour, Characterization and Modelling of Various Geomaterials and Interfaces - Soil Stabilisation and Improvement
DOI https://doi.org/10.1051/e3sconf/202454411013
Published online 02 July 2024
  1. Amaral, M. “Avaliação de módulos de distorção dinâmicos em misturas de solo-cimento com recurso a métodos ultrasónicos de impulso no domínio do tempo e registos de modos de ressonância por Análise Espectral de Séries de Fourier”, (Evaluation of dynamic shear modulus in soilcement mixtures with ultrasonic transducers in time domain and spectral analysis with Fourier series for registration of resonance modes.) MSc thesis, Faculdade de Engenharia da Universidade do Porto, Portugal (in Portuguese), 2009. [online] Available at: https://hdl.handle.net/10216/59258 , accessed: 17/05/2023. [Google Scholar]
  2. Amaral, M. F., A.Viana da Fonseca, M. Arroyo, G. Cascante and J. Carvalho “Compression and shear wave propagation in cemented-sand specimens”, Geotech. Lett., No. 3, pp. 79–84, 2011. https://doi.org/10.1680/geolett.11.00032 [CrossRef] [Google Scholar]
  3. Arroyo. M., M. F. Amaral, E. Romero and A. Viana da Fonseca “Isotropic yielding of unsaturated cemented silty sand”, #Can. Geotech. J., 50, pp. 807–819, 2013. https://doi.org/10.1139/cgj-2012-0216 [CrossRef] [Google Scholar]
  4. ASTM (2000). D 2845: standard test method for laboratory determination of pulse velocities and ultrasonic elastic constants of rock. Annual Book of ASTM Standards, West Conshohocken, PA, USA, vol. 04.02. [Google Scholar]
  5. Athira, V. S.; A. Bahurudeen, M. Saljas and K. Jayachandran “Influence of different curing methods on mechanical and durability properties of alkali activated binders”, Constr. Build. Mater., Vol 299, pp. 123963, 2021. https://doi.org/10.1016/j.conbuildmat.2021.123963 [CrossRef] [Google Scholar]
  6. Azenha, M., C. Ferreira, J. Silva, A. G. Correia, R. Aguilar, and L. F. Ramos “Continuous stiffness monitoring of cemented sand through resonant frequency”, In: GeoHunan International Conference 2011, Hunan, China, 2011, pp. 174–183. https://doi.org/10.1061/47629(408)22 [Google Scholar]
  7. Camacho-Tauta, J.; H. Ali, G. Giovanni Cascante and A. Viana da Fonseca “Experimental and Numerical Observations of the Frequency-Domain Method in Bender-Element Testing”, J. Geotech. Geoenviron., vol 143, issue 2, 2016. http://doi.org/10.1061/(ASCE)GT.1943-5606.0001603 [Google Scholar]
  8. Consoli, N., A. Viana da Fonseca, S. Rios, R. Cruz and A. Fonini “Parameters controlling stiffness and strength of artificially cemented soils”, Rev. Fr. Geotech., 62(2), 177–183, 2012. https://doi.org/10.1680/geot.8.P.084 [CrossRef] [Google Scholar]
  9. Ferreira, C., S. Rios, N. Cristelo and A. Viana da Fonseca “Evolution of the optimum ultrasonic testing frequency of alkali-activated soil–ash”, Geotech. Lett., 11(3), pp. 158–163, 2021. https://doi.org/10.1680/jgele.21.00041 [Google Scholar]
  10. Garcia-Lodeiro, I, A. Palomo, A. Fernández-Jiménez and D.E. Macphee “Compatibility studies between N-A-S-H and CA-S-H gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O”, Cem. Concr. Res., 41 (9), pp. 923–931, 2011. https://doi.org/10.1016/j.cemconres.2011.05.006 [CrossRef] [Google Scholar]
  11. Khan, Z. H., G. Cascante, and M. H. El-Naggar “Measurement of dynamic properties of stiff specimens using ultrasonic waves”, Can. Geotech. J. 48, No. 1, pp. 1–15, 2011. https://doi.org/10.1139/T10-040 [Google Scholar]
  12. Lehne, J. and F. Preston “Making concrete change”, London, UK: The Royal Institute of International, 2018. [Google Scholar]
  13. Pinheiro, C., S. Rios, A. Viana da Fonseca, A. Fernández-Jiménez and N. Cristelo “Application of the response surface method to optimize alkali activated cements based on low-reactivity ladle furnace slag”, Constr. Build. Mater., 264 (20), 2020. https://doi.org/10.1016/j.conbuildmat.2020.120271 [Google Scholar]
  14. Provis, J. “Alkali-activated materials”, Cem. Concr. Res., 114, pp. 40–48, 2018. https://doi.org/10.1016/j.cemconres.2017.02.009 [CrossRef] [Google Scholar]
  15. Provis, J., and J. van Deventer “Alkali activated materials: State-of-the-art report” RILEM TC 224-AAM. Heidelberg, Germany, Springer, 2014. [Google Scholar]
  16. Rios, S., A. Viana da Fonseca and B. Baudet “On the shearing behaviour of an artificially cemented soil”, Acta Geotech, 9(2), pp. 215–226, 2014. https://doi.org/10.1007/s11440-013-0242-7 [CrossRef] [Google Scholar]
  17. Rios, S., C. Cristelo, A. Viana da Fonseca and C. Ferreira “Stiffness Behavior of Soil Stabilized with Alkali-Activated Fly Ash from Small to Large Strains”, Int. J. Geomech, 17(3), pp. 1–12, 2017. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000783 [Google Scholar]
  18. Rios, S., C. Ramos, A. Viana da Fonseca, N. Cruz, C. Rodrigues “Mechanical and durability properties of a soil stabilized with an alkali-activated cement”, Eur. J. Environ. Civ. Eng., 23(2), pp. 245–267, 2019. https://doi.org/10.1080/19648189.2016.1275987 [Google Scholar]
  19. Stokoe, K. H. and J. C. Santamarina “Seismic-wave-based testing in geotechnical engineering”, In: Proceedings of the international conference on geotechnical and geological Engineering (GeoEng 2000), Melbourne, Australia, 2000, pp. 1490–1536. [Google Scholar]
  20. Viana da Fonseca, A. “Characterizing and deriving engineering properties of a saprolitic soil from granite, in Porto”, In: Characterization and engineering properties of natural soils (Tan, T. S., Phoon, K. K., Hight, D. W. & Leroueil, S. (eds)). Swets and Zeitlinger, Lisse, Netherlands, 2003, pp. 1341–1378, ISBN 90 5809 537 1 [Google Scholar]
  21. Viana da Fonseca, A., J. Carvalho, C. Ferreira, J. A. Santos, F. Almeida, E. Pereira, J. Feliciano, J. Grade and A. Oliveira “Characterization of a profile of residual soil from granite combining geological, geophysical, and mechanical testing techniques”, Geotech. Geol. Eng., 14(5), pp. 1307–1348, 2006. [Google Scholar]
  22. Viana da Fonseca, A., C. Ferreira and M. Fahey “A framework interpreting bender element tests, combining time domain and frequency-domain methods”, Geotech. Test. J., 32, No. 2, pp. 1–17, 2009. [Google Scholar]
  23. Viana da Fonseca, A., M. F. Amaral, F. Panico and S. Rios “Indexation of Dynamic and Static Geomechanical Properties of a Cemented Aggregate for Transportation Engineering”, Transp. Geotech., 1(1), pp. 31–44, 2014. https://doi.org/doi:10.1016/j.trgeo.2014.02.001 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.