EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 552 (2024) E3S Web Conf., 552 (2024) 01105 References
Open Access
Issue
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
Article Number 01105
Number of page(s) 11
DOI https://doi.org/10.1051/e3sconf/202455201105
Published online 23 July 2024
  1. Latko-Durałek, Paulina, Kamil Dydek, and Anna Boczkowska. “Thermal, rheological and mechanical properties of PETG/rPETG blends.” Journal of Polymers and the Environment 27 (2019): 2600-2606. [CrossRef] [Google Scholar]
  2. Chen, Tingting, Jun Zhang, and Hongjun You. “Photodegradation behavior and mechanism of poly (ethylene glycol-co-1, 4-cyclohexanedimethanol terephthalate) (PETG) random copolymers: Correlation with copolymer composition.” RSC advances 6, 104 (2016): 102778-102790. [CrossRef] [Google Scholar]
  3. Calvino, Céline, Emma Henriet, Livius F. Muff, Stephen Schrettl, and Christoph Weder. “Mechanochromic polymers based on microencapsulated solvatochromic dyes.” Macromolecular rapid communications 41, 7 (2020): 1900654. [CrossRef] [Google Scholar]
  4. Krzyzanowski, Pawel. “Design and development of 3D printed fins integrated into an instrumented surfboard.” (2022). [Google Scholar]
  5. Santos, Jean Vitor Vassoler dos. “Análise da influência das variáveis de fabricação altura de camada, densidade de preenchimento, temperatura do bico extrusor e velocidade de impressão sobre as propriedades mecânicas de peças de PETG fabricadas através do processo de FDM.” (2023). [Google Scholar]
  6. Paszkiewicz, S., I. Pawelec, A. Szymczyk, and Z. Roslaniec. “Swcnts/Poly (Ethylene Terephthalate Glycol-Modified)(Petg) Nanocomposites: Preparation And Characterization Of Thin Conductive Films.” International Journal of Materials Engineering and Technology 11, 2 (2014): 139. [Google Scholar]
  7. Haase, Andreas, Pascal Hesse, Lars Brommer, Olaf Jacobs, Clarissa Abetz, Ulrich A. Handge, Adriana Boschetti-de-Fierro, and Volker Abetz. “Modification of Polycarbonate and Glycol Modified Poly (ethylene terephthalate) by Addition of Silica-Nanoparticles Grafted with SAN Copolymer Using “Classical” and ARGET ATRP.” Macromolecular Materials and Engineering 298, 3 (2013): 292-302. [Google Scholar]
  8. Vidakis, Nectarios, Markos Petousis, Lazaros Tzounis, Sotirios A. Grammatikos, Emmanouil Porfyrakis, Athena Maniadi, and Nikolaos Mountakis. “Sustainable additive manufacturing: Mechanical response of polyethylene terephthalate glycol over multiple recycling processes.” Materials 14, no., 5 (2021): 1162. [CrossRef] [PubMed] [Google Scholar]
  9. Bremer, Mats, Lukas Janoschek, Denis Kaschta, Nick Schneider, and Michael Wahl. “Influence of plastic recycling—a feasibility study for additive manufacturing using glycol modified polyethylene terephthalate (PETG).” SN Applied Sciences 4, no. 5(2022): 156. [Google Scholar]
  10. Hassan, Mohamed H., Abdalla M. Omar, Evangelos Daskalakis, Yanhao Hou, Boyang Huang, Ilya Strashnov, Bruce D. Grieve, and Paulo Bártolo. “The potential of polyethylene terephthalate glycol as biomaterial for bone tissue engineering.” Polymers 12, no., 12 (2020): 3045. [CrossRef] [PubMed] [Google Scholar]
  11. Katschnig, Matthias, Juergen Wallner, Thomas Janics, Christoph Burgstaller, Wolfgang Zemann, and Clemens Holzer. “Biofunctional glycol-modified polyethylene terephthalate and thermoplastic polyurethane implants by extrusion-based additive manufacturing for medical 3D maxillofacial defect reconstruction.” Polymers 12, no., 8 (2020): 1751. [CrossRef] [PubMed] [Google Scholar]
  12. Lenshin, Alexander S., Vera E. Frolova, Sergey S. Ivkov, and Evelina P. Domashevskaya. “Microstructural and hydrophilic properties of polyethylene terephthalate glycol polymer samples with different 3D printing patterns.” Condensed Matter and Interphases 26, no. 1 (2024): 78-87. [Google Scholar]
  13. Zapciu, A., C. Gh Amza, F. Baciu, and M.I. Vasile. “Heat treatment of 3D printed polyethylene terephthalate glycol in a supporting powder bed.” In IOP Conference Series: Materials Science and Engineering, vol. 1182, no. 1, p. 012083. IOP Publishing,2021. [CrossRef] [Google Scholar]
  14. Garwacki, Mikołaj, Igor Cudnik, Damian Dziadowiec, Piotr Szymczak, and Jacek Andrzejewski. “The Development of Sustainable Polyethylene Terephthalate Glycol-Based (PETG) Blends for Additive Manufacturing Processing—The Use of Multilayered Foil Waste as the Blend Component.” Materials 17, no., 5 (2024): 1083. [CrossRef] [PubMed] [Google Scholar]
  15. Clarke, Tim, and Ali Hosseini. “Effects of print parameters on tensile characteristics of additively manufactured polyethylene terephthalate-glycol (PETG).” The International Journal of Advanced Manufacturing Technology 125, no. 11 (2023): 4953-4974. [CrossRef] [Google Scholar]
  16. Mahesh, Vinyas. “ANN based prediction of the absorption characteristics of additive manufactured glycol-modified polyethylene terephthalate nanocomposites reinforced with short-carbon fibers and nanoclay fillers.” Polymer Composites 44, no. 12 (2023):8223-8239. [CrossRef] [Google Scholar]
  17. Bernasconi, Roberto, Gabriele Natale, Marinella Levi, and Luca Magagnin. “Electroless plating of NiP and Cu on polylactic acid and polyethylene terephthalate glycol-modified for 3D printed flexible substrates.” Journal of The Electrochemical Society 163, no. 9 (2016): D526. [CrossRef] [Google Scholar]
  18. Suji Prasad, S. J., M. Thangatamilan, M. Suresh, Hitesh Panchal, Christober Asir Rajan, C. Sagana, B. Gunapriya, Aditi Sharma, Tusharkumar Panchal, and Kishor Kumar Sadasivuni. “An efficient LoRa-based smart agriculture management and monitoring system using wireless sensor networks.” International Journal of Ambient Energy 43, no. 1 (2022): 5447-5450. [CrossRef] [Google Scholar]
  19. Joseph, Sudha, Kavitha Joseph, Trevor C. Lindley, and David Dye. “The role of dwell hold on the dislocation mechanisms of fatigue in a near alpha titanium alloy.” International Journal of Plasticity, 131 (2020): 102743. [CrossRef] [Google Scholar]
  20. Prasad, C. Durga, S. Kollur, M. Nusrathulla, G. Satheesh Babu, M. B. Hanamantraygouda, B. N. Prashanth, and N. Nagabhushana. “Characterisation and wear behaviour of SiC reinforced FeNiCrMo composite coating by HVOF process.” Transactions of the IMF 102, no. 1 (2024): 22-28. [CrossRef] [Google Scholar]
  21. Meenal, R., D. Binu, K. C. Ramya, Prawin Angel Michael, K. Vinoth Kumar, E. Rajasekaran, and B. Sangeetha. “Weather forecasting for renewable energy system: a review.” Archives of Computational Methods in Engineering 29, no. 5 (2022): 2875–2891. [CrossRef] [Google Scholar]
  22. Akshatha, S., S. Sreenivasa, L. Parashuram, Fahad A. Alharthi, and Tadimety Madhu Chakrapani Rao. “Microwave assisted green synthesis of p-type Co3O4@ Mesoporous carbon spheres for simultaneous degradation of dyes and photocatalytic hydrogen evolution reaction.” Materials Science in Semiconductor Processing, 121 (2021): 105432. [CrossRef] [Google Scholar]
  23. Akshatha, S., S. Sreenivasa, L. Parashuram, V. Udaya Kumar, S. C. Sharma, H. Nagabhushana, Sandeep Kumar, and T. Maiyalagan. “Synergistic effect of hybrid Ce3+/Ce4+ doped Bi2O3 nano-sphere photocatalyst for enhanced photocatalytic degradation of alizarin red S dye and its NUV excited photoluminescence studies.” Journal of Environmental Chemical Engineering 7, no., 3 (2019): 103053. [CrossRef] [Google Scholar]
  24. Ramkumar, M., C. Ganesh Babu, K. Vinoth Kumar, D. Hepsiba, A. Manjunathan, and R. Sarath Kumar. “ECG cardiac arrhythmias classification using DWT, ICA and MLP neural networks.” In Journal of Physics: Conference Series, vol. 1831, no. 1, p. 012015. IOP Publishing, 2021. [CrossRef] [Google Scholar]
  25. Kumar, CB Pradeep, B. S. Prathibha, K. N. N. Prasad, M. S. Raghu, M. K. Prashanth, B. K. Jayanna, Fahad A. Alharthi, S. Chandrasekhar, H. D. Revanasiddappa, and K. Yogesh Kumar. “Click synthesis of 1, 2, 3-triazole based imidazoles: Antitubercular evaluation, molecular docking and HSA binding studies.” Bioorganic & Medicinal Chemistry Letters, 36 (2021): 127810. [CrossRef] [PubMed] [Google Scholar]
  26. Rajesh, A., K. Gopal, B. Rajesh Kumar, A. P. Sathiyagnanam, and D. Damodharan. “Effect of anisole addition to waste cooking oil methyl ester on combustion, emission and performance characteristics of a DI diesel engine without any modifications.” Fuel, 278 (2020): 118315. [CrossRef] [Google Scholar]
  27. Naik, Ramachandra, S. C. Prashantha, H. Nagabhushana, S. C. Sharma, H. P. Nagaswarupa, and K. M. Girish. “Effect of fuel on auto ignition route, photoluminescence and photometric studies of tunable red emitting Mg2SiO4: Cr3+ nanophosphors for solid state lighting applications.” Journal of Alloys and Compounds 682 (2016): 815-824. [CrossRef] [Google Scholar]
  28. Naveen Kumar, Rangaswamy, J. Suresh Goud, Pudhari Srilatha, Pattasale T. Manjunatha, S. Prasanna Rani, Raman Kumar, and S. Suresha. “Cattaneo–Christov heat flux model for nanofluid flow over a curved stretching sheet: An application of Stefan blowing.” Heat Transfer 51, no. 6 (2022): 4977-4991. [CrossRef] [Google Scholar]
  29. Vallabhuni, Rajeev Ratna, G. Yamini, T. Vinitha, and S. Sanath Reddy. “Performance analysis: D-Latch modules designed using 18nm FinFET Technology.” In 2020 International Conference on Smart Electronics and Communication (ICOSEC), pp. 1169-1174. IEEE, 2020. [CrossRef] [Google Scholar]
  30. Dhanalaxmi, B., and G. Apparao Naidu. “A survey on design and analysis of robust IoT architecture.” In 2017 International Conference on Innovative Mechanisms for Industry Applications (ICIMIA), pp. 375-378. IEEE, 2017. [CrossRef] [Google Scholar]
  31. Nikam, Pritam B., Jayendra Kumar, V. Sivanagaraju, and Achinta Baidya. “Dual-band reconfigurable EBG loaded circular patch MIMO antenna using defected ground structure (DGS) and PIN diode integrated branch-lines (BLs).” Measurement, 195 (2022): 111127. [CrossRef] [Google Scholar]
  32. Vallabhuni, Rajeev Ratna, Jujavarapu Sravana, Chandra Shaker Pittala, Mikkili Divya, B. M. S. Rani, and Vallabhuni Vijay. “Universal shift register designed at low supply voltages in 20 nm FinFET using multiplexer.” In Intelligent Sustainable Systems: Proceedings of ICISS 2021, pp. 203-212. Singapore: Springer Singapore, 2021. [Google Scholar]
  33. Kishore, Somasundaram Chandra, Raji Atchudan, Thomas Nesakumar Jebakumar Immanuel Edison, Suguna Perumal, Muthulakshmi Alagan, Rajangam Vinodh, Mani Shanmugam, and Yong Rok Lee. “Solid waste-derived carbon fibers-trapped nickel oxide composite electrode for energy storage application.” Energy & Fuels 34, no. 11 (2020): 14958-14967. [CrossRef] [Google Scholar]
  34. Malagavelli, Venu, Srinivas Angadi, J. S. R. Prasad, and Subodh Joshi. “Influence of metakaolin in concrete as partial replacement of cement.” Int J Civil Eng Technol 9, no. 7 (2018): 105-111. [Google Scholar]
  35. Ashok Babu, Puralasetty, Javanna Latheef Mazher Iqbal, S. Siva Priyanka, Machana Jithender Reddy, Gaddam Sunil Kumar, and Rajaram Ayyasamy. “Power control and optimization for power loss reduction using deep learning in microgrid systems.” Electric Power Components and Systems 52, no. 2 (2024): 219-232. [CrossRef] [Google Scholar]
  36. Saritha, M., M. Lavanya, G. Ajitha, Mulinti Narendra Reddy, P. Annapurna, M. Sreevani, S. Swathi, S. Sushma, and Vallabhuni Vijay. “A VLSI design of clock gated technique based ADC lock-in amplifier.” International Journal of System Assurance Engineering and Management 13, no. 5 (2022): 2743-2750. [Google Scholar]
  37. Pittala, Chandra Shaker, Rajeev Ratna Vallabhuni, Vallabhuni Vijay, Usha Rani Anam, and Kancharapu Chaitanya. “Numerical analysis of various plasmonic MIM/MDM slot waveguide structures.” International Journal of System Assurance Engineering and Management 13, no. 5 (2022): 2551-2558. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.