Open Access
Issue |
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
|
|
---|---|---|
Article Number | 01106 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/e3sconf/202455201106 | |
Published online | 23 July 2024 |
- Samykano, M. “Mechanical property and prediction model for FDM-3D printed polylactic acid (PLA).” Arabian Journal for Science and Engineering 46 (2021): 7875–7892. [CrossRef] [Google Scholar]
- Kajbič, Jure, Jernej Klemenc, and Gorazd Fajdiga. “On the fatigue properties of material extrusion 3D-printed biodegradable composites reinforced with continuous flax fibers.” International Journal of Fatigue, 177 (2023): 107954. [CrossRef] [Google Scholar]
- Hosseinzadeh, Mohammadhadi, Majid Ghoreishi, and Keivan Narooei. “An investigation into the effect of thermal variables on the 3D printed shape memory polymer structures with different geometries.” Journal of Intelligent Material Systems and Structures 33, 5 (2022): 715-726. [CrossRef] [Google Scholar]
- Ilyaei, Sina, Yousef Abubasir, and Reza Sourki. “PLA-based 3D printed porous scaffolds under mixed-mode I/III loading.“ Engineering Fracture Mechanics 265 (2022) : 108382. [CrossRef] [Google Scholar]
- Singh, Dhananjay Kr, Pankaj Kr Baitha, and J. Manam. “Enhancement of luminescence intensity and spectroscopic analysis of Eu 3+-activated and Li+ charge-compensated CaTiO 3 color tunable phosphors for solid-state lighting.” Applied Physics A 122 (2016): 1-15. [Google Scholar]
- Kumar, K. Yogesh, Himani Saini, D. Pandiarajan, M. K. Prashanth, L. Parashuram, and M. S. Raghu. “Controllable synthesis of TiO2 chemically bonded graphene for photocatalytic hydrogen evolution and dye degradation.” Catalysis Today 340 (2020): 170-177. [CrossRef] [Google Scholar]
- Raghu, M. S., CB Pradeep Kumar, M. K. Prashanth, K. Yogesh Kumar, B. S. Prathibha, G. Kanthimathi, Siham Abdulrahman Alissa, Hanan Abdulrahman Alghulikah, and Sameh M. Osman. “Novel 1, 3, 5-triazine-based pyrazole derivatives as potential antitumor agents and EFGR kinase inhibitors: Synthesis, cytotoxicity, DNA binding, molecular docking and DFT studies.” New Journal of Chemistry 45, 31 (2021): 13909–13924. [CrossRef] [Google Scholar]
- Suganthi, S. T., Arangarajan Vinayagam, Veerapandiyan Veerasamy, A. Deepa, Mohamed Abouhawwash, and Mariammal Thirumeni. “Detection and classification of multiple power quality disturbances in Microgrid network using probabilistic based intelligent classifier.” Sustainable Energy Technologies and Assessments, 47 (2021): 101470. [CrossRef] [Google Scholar]
- Bale, Ajay Sudhir, Naveen Ghorpade, Muhammed Furqaan Hashim, Jatin Vaishnav, and Zahra Almaspoor. “A comprehensive study on metaverse and its impacts on humans.” Advances in Human-Computer Interaction 2022 (2022). [Google Scholar]
- Naik, Ramachandra, S. C. Prashantha, and H. Nagabhushana. “Effect of Li+ codoping on structural and luminescent properties of Mg2SiO4: RE3+ (RE= Eu, Tb) nanophosphors for displays and eccrine latent fingerprint detection.” Optical Materials 72 (2017): 295-304. [CrossRef] [Google Scholar]
- Naik, Ramachandra, S. C. Prashantha, H. Nagabhushana, S. C. Sharma, H. P. Nagaswarupa, K. S. Anantharaju, B. M. Nagabhushana, H. B. Premkumar, and K. M. Girish. “A single phase, red emissive Mg2SiO4: Sm3+ nanophosphor prepared via rapid propellant combustion route. “ Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy 140 (2015): 516-523. [Google Scholar]
- Karuppusamy, Loheswaran, Jayavadivel Ravi, Murali Dabbu, and Srinivasan Lakshmanan. “Chronological salp swarm algorithm based deep belief network for intrusion detection in cloud using fuzzy entropy.” International Journal of Numerical Modelling: Electronic Networks, Devices and Fields 35, 1 (2022): e2948. [CrossRef] [Google Scholar]
- Ramakrishna, G., Ramachandra Naik, H. Nagabhushana, R. B. Basavaraj, S. C. Prashantha, S. C. Sharma, and K. S. Anantharaju. “White light emission and energy transfer (Dy3+→ Eu3+) in combustion synthesized YSO: Dy3+, Eu3+ nanophosphors.” Optik 127,5 (2016): 2939-2945. [CrossRef] [Google Scholar]
- Jisha, P. K., Ramachandra Naik, S. C. Prashantha, H. Nagabhushana, S. C. Sharma, H. P. Nagaswarupa, K. S. Anantharaju, B. Daruka Prasad, and H. B. Premkumar. “Facile combustion synthesized orthorhombic GdAlO3: Eu3+ nanophosphors: Structural and photoluminescence properties for WLEDs.” Journal of Luminescence 163 (2015): 47–54. [CrossRef] [Google Scholar]
- Vijay, Vallabhuni, CV Sai Kumar Reddy, Chandra Shaker Pittala, Rajeev Ratna Vallabhuni, M. Saritha, M. Lavanya, S. China Venkateswarlu, and M. Sreevani. “ECG performance validation using operational transconductance amplifier with bias current.” International Journal of System Assurance Engineering and Management 12 (2021): 1173-1179. [Google Scholar]
- Reddy, P. Venkateshwar, B. Veerabhadra Reddy, and P. Srinivasa Rao. “A numerical study on tube hydroforming process to optimize the process parameters by Taguchi method.” Materials Today: Proceedings 5, 11 (2018): 25376-25381. [CrossRef] [Google Scholar]
- Botlagunta, Mahendran, Madhavi Devi Botlagunta, Madhu Bala Myneni, D. Lakshmi, Anand Nayyar, Jaithra Sai Gullapalli, and Mohd Asif Shah. “Classification and diagnostic prediction of breast cancer metastasis on clinical data using machine learning algorithms.” Scientific Reports 13, 1 (2023): 485. [CrossRef] [PubMed] [Google Scholar]
- Sushovan Chaudhury, Alla Naveen Krishna, Suneet Gupta, K. Sakthidasan Sankaran, Samiullah Khan, Abhishek Raghuvanshi Kartik Sau, and F. Sammy. “Effective Image Processing and Segmentation-Based Machine Learning Techniques for Diagnosis of Breast Cancer.” Computational and Mathematical Methods in Medicine 2022. [Google Scholar]
- Devi, M. Dharani, A. Vimala Juliet, K. Hariprasad, V. Ganesh, H. Elhosiny Ali, H. Algarni, and I. S. Yahia. “Improved UV Photodetection of Terbium-doped NiO thin films prepared by cost-effective nebulizer spray technique.” Materials Science in Semiconductor Processing, 127 (2021): 105673. [CrossRef] [Google Scholar]
- Padmaja, B., VV Rama Prasad, and K. V. N. Sunitha. “A machine learning approach for stress detection using a wireless physical activity tracker.” International Journal of Machine Learning and Computing 8, 1 (2018): 33-38. [CrossRef] [Google Scholar]
- Bhukya, Laxman, Narender Reddy Kedika, and Surender Reddy Salkuti. “Enhanced maximum power point techniques for solar photovoltaic system under uniform insolation and partial shading conditions: a review.” Algorithms 15, 10 (2022): 365. [CrossRef] [Google Scholar]
- Subramanian, Malliga, Narasimha Prasad Lv, and Sathishkumar VE. “Hyperparameter optimization for transfer learning of VGG16 for disease identification in corn leaves using Bayesian optimization.” Big Data 10, 3 (2022): 215-229. [CrossRef] [PubMed] [Google Scholar]
- Vijaykumar, G., Anil Gantala, Mary Swarna Latha Gade, P. Anjaneyulu, and Sk Hasane Ahammad. “Microcontroller based heartbeat monitoring and display on PC.” Journal of Advanced Research in Dynamical and Control Systems 9, 4 (2017): 250-260. [Google Scholar]
- Pittala, Chandra Shaker, Vallabhuni Vijay, and B. Naresh Kumar Reddy. “1-Bit FinFET carry cells for low voltage high-speed digital signal processing applications.” Silicon 15, 2 (2023): 713-724 [Google Scholar]
- Daniel, Fraser, Andy Gleadall, and Adarsh D. Radadia. “Influence of interface in electrical properties of 3D printed structures.” Additive manufacturing, 46 (2021): 102206. [CrossRef] [PubMed] [Google Scholar]
- Ismail Mourad, Abdel-Hamid, Amir Hussain Idrisi, John Victor Christy, Dinu Thomas Thekkuden, Hamad Al Jassmi, Abdallah M. Ghazal, Mahmmoud M. Syam, and Omar Darwish Ali Ahmed Al Qadi. “Mechanical performance assessment of internallydefected materials manufactured using additive manufacturing technology.” Journal of Manufacturing and Materials Processing 3, 3 (2019): 74. [CrossRef] [Google Scholar]
- Constantinou, Peter, and Saibal Roy. “A 3D printed electromagnetic nonlinear vibration energy harvester.” Smart Materials and Structures 25, 9 (2016): 095053. [Google Scholar]
- Coşkun, Zeliha, Talip Çelik, and Yasin Kişioğlu. “Metatarsal bone model production using 3D printing and comparison of material properties with results obtained from CT-based modeling and real bone.” Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 237, 4 (2023): 481-488. [CrossRef] [PubMed] [Google Scholar]
- Van Der Merwe, Shade Rouxzeta, Daniel Ogochukwu Okanigbe, Dawood Ahmed Desai, and Glen Campbell Snedden. “Aircraft Engine Fan Blade Design: Impact Tolerance Prediction of Partially Filled 3D Printed Aluminum, Titanium, and PEEK-Filled Waste Metal Dusts.” In Resource Recovery and Recycling from Waste Metal Dust, pp. 243–269. Cham: Springer International Publishing, 2023. [CrossRef] [Google Scholar]
- Silvestri, Stefano, Simonetta Baraccani, Dora Foti, Salvador Ivorra, Dimitris Theodossopoulos, Vitantonio Vacca, Jacqueline Ochoa Roman et al. “Shaking table testing of groin vaults made by 3D printers. “ Soil Dynamics and Earthquake Engineering 150 (2021): 106880. [Google Scholar]
- León-Calero, Marina, Sara Catherine Reyburn Valés, Ángel Marcos-Fernández, and Juan Rodríguez-Hernandez. “3D printing of thermoplastic elastomers: role of the chemical composition and printing parameters in the production of parts with controlled energy absorption and damping capacity.” Polymers 13, 20 (2021): 3551. [CrossRef] [PubMed] [Google Scholar]
- Silva, Rita de Cássia, Gabriel Martins de Castro, Alessandro Borges de Sousa Oliveira, and Augusto César de Mendonça Brasil. “Effect of 3D-Printed Honeycomb Core on Compressive Property of Hybrid Energy Absorbers: Experimental Testing and Optimization Analysis.” Materials 17, 2 (2024): 522. [CrossRef] [PubMed] [Google Scholar]
- Chen, Xibao, Gang Chen, Gang Wang, Peizhi Zhu, and Chunxia Gao. “Recent progress on 3D-printed polylactic acid and its applications in bone repair.” Advanced Engineering Materials 22, 4 (2020): 1901065. [CrossRef] [Google Scholar]
- Suteja, T. J., and A. Soesanti. “Mechanical properties of 3D printed polylactic acid product for various infill design parameters: a review.” In Journal of Physics: Conference Series, 1569, 4, 042010. IOP Publishing, 2020. [CrossRef] [Google Scholar]
- Dichtl, Claudius, Pit Sippel, and Stephan Krohns. “Dielectric properties of 3D printed polylactic acid.” Advances in Materials Science and Engineering 2017 (2017). [Google Scholar]
- Ambone, Tushar, Arun Torris, and Kadhiravan Shanmuganathan. “Enhancing the mechanical properties of 3D printed polylactic acid using nanocellulose.” Polymer Engineering & Science 60, 8 (2020): 1842-1855. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.