EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 567 (2024) E3S Web Conf., 567 (2024) 01008 References
Open Access
Issue
E3S Web Conf.
Volume 567, 2024
8th International Conference “Physical & Chemical Geotechnologies” 2024
Article Number 01008
Number of page(s) 12
DOI https://doi.org/10.1051/e3sconf/202456701008
Published online 09 September 2024
  1. Pysmennyi, S., Fedko, M., Chukharev, S., Sakhno, I., Moraru, R., & Panayotov, V. (2023). Enhancement of the rock mass quality in underground iron ore mining through application of resource-saving technologies. IOP Conference Series: Earth and Environmental Science, 1156(1), 012029. https://doi.org/10.1088/1755-1315/1156/1/012029 [CrossRef] [Google Scholar]
  2. Pysmennyi, S., Chukharev, S., Peremetchy, A., Fedorenko S., & Matsui, A. (2023). Study of Stress Concentration on the Contour of Underground Mine Workings. Inzynieria Mineralna, (1), 69–78. https://doi.org/10.29227/IM-2023-01-08 [Google Scholar]
  3. Kosenko, A.V. (2021). Improvement of sub-level caving mining methods during high-grade iron ore mining. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (1), 19–25. https://doi.org/10.33271/nvngu/2021-1/019 [CrossRef] [Google Scholar]
  4. Pysmennyi, S., Fedko, M., Peremetchyk, A., Chukharev, S., Pilchyk, V., & Mutambo, V. (2024). Improvement of the stoping technology in mining magnetite quartzite by underground methods. E3S Web of Conferences, (526), 01023. https://doi.org/10.1051/e3sconf/202452601023 [CrossRef] [EDP Sciences] [Google Scholar]
  5. Kamiński, P., Dyczko, A., & Prostański, D. (2021). Virtual Simulations of a New Construction of the Artificial Shaft Bottom (Shaft Safety Platform) for Use in Mine Shafts. Energies, 14(8), 2110. https://doi.org/10.3390/en14082110 [CrossRef] [Google Scholar]
  6. Sadovenko, I.A., & Inkin, A.V. (2018). Method for stimulating underground coal gasification. Journal of Mining Science, 54(3), 514–521. http://dx.doi.org/10.1134/S1062739118033941 [CrossRef] [Google Scholar]
  7. Rudakov, D.V., & Rudakov, V.C. (1999). Analytical modeling of aquifer pollution caused by solid waste depositories. Ground Water, 37(3), 352–357. https://doi.org/10.1111/j.1745-6584.1999.tb01111.x [CrossRef] [Google Scholar]
  8. Polyanska, A., Pazynich, Y., Mykhailyshyn, K., Babets, D., & Toś, P. (2024). Aspects of energy efficiency management for rational energy resource utilization. Rudarsko-Geološko-Naftni Zbornik, 39(3), 13–26. https://doi.org/10.17794/rgn.2024.3.2 [CrossRef] [Google Scholar]
  9. Sala, D., & Bieda, B. (2022). Application of uncertainty analysis based on Monte Carlo (MC) simulation for life cycle inventory (LCI). Inżynieria Mineralna, 2(2). https://doi.org/10.29227/im-2019-02-80 [Google Scholar]
  10. Dudek, M. (2017). The analysis of the low-cost flexibility corridors. In 2017 IEEE International Conference on Innovations in Intelligent Systems and Applications (pp. 478–483). Gdynia, Poland: Gdynia Maritime University. https://doi.org/10.1109/inista.2017.8001207 [Google Scholar]
  11. Dychkovskyi, R., Saik, P., Sala, D., & Cabana, E.C. (2024). The current state of the non-ore mineral deposits mining in the concept of the Ukraine reconstruction in the post-war period. Mineral Economics, 1–11. https://doi.org/10.1007/s13563-024-00436-z [Google Scholar]
  12. Sala, D., & Bieda, B. (2022). Stochastic approach based on Monte Carlo (MC) simulation used for Life Cycle Inventory (LCI) uncertainty analysis in Rare Earth Elements (REEs) recovery. E3S Web of Conferences, (349), 01013. https://doi.org/10.1051/e3sconf/202234901013 [CrossRef] [EDP Sciences] [Google Scholar]
  13. Lewicka, D. (2020). Employee institutional trust as an antecedent of diverse dimensions of organisational commitment. Argumenta Oeconomica, 1(44), 321–340. https://doi.org/10.15611/aoe.2020.1.13 [CrossRef] [Google Scholar]
  14. Zakrzewska-Bielawska, A., & Lewicka, D. (2021). A company’s relational strategy: Linkage between strategic choices, attributes, and outcomes. PLOS ONE, 16(7), e0254531. https://doi.org/10.1371/journal.pone.0254531 [CrossRef] [PubMed] [Google Scholar]
  15. Kosenko, A.V. (2023). Development of an efficient process scheme for breaking high-grade iron ores of low strength and stability during sublevel caving. Science and Innovation, 19(3), 38–47. https://doi.org/10.15407/scine19.03.038 [CrossRef] [Google Scholar]
  16. Kononenko, M., Khomenko, O., Kosenko, A., Myronova, I., Bash V., & Pazynich, Yu. (2024). Raises advance using emulsion explosives. E3S Web of Conferences, (526), 01010. https://doi.org/10.1051/e3sconf/202452601010 [CrossRef] [EDP Sciences] [Google Scholar]
  17. Pysmennyi, S., Brovko, D., Shwager, N., Kasatkina, I., Paraniuk, D., & Serdiuk, O. (2018). Development of complex-structure ore deposits by means of chamber systems under conditions of the Kryvyi Rih iron ore field. Eastern-European Journal of Enterprise Technologies, 5(1-95), 33–45. https://doi.org/10.15587/1729-4061.2018.142483 [CrossRef] [Google Scholar]
  18. Stupnik, M., Kalinichenko, O., Kalinichenko, V., Pysmennyi, S., & Morhun, O. (2018). Choice and substantiation of stable crown shapes in deep-level iron ore mining. Mining of Mineral Deposits, 12(4), 56–62. https://doi.org/10.15407/mining12.04.056 [CrossRef] [Google Scholar]
  19. Pysmenniy, S., Shvager, N., Shepel, O. Kovbyk, K., & Dolgikh, O. (2020). Development of resource-saving technology when mining ore bodies by blocks under rock pressure. E3S Web of Conferences, (166), 02006. https://doi.org/10.1051/e3sconf/202016602006 [CrossRef] [EDP Sciences] [Google Scholar]
  20. Khomenko, O., Kononenko, M., & Lyashenko, V. (2021). Improvement of safety for the underground vertical workings. Occupational Safety in Industry, (2), 41–48. http://doi.org/10.24000/0409-2961-2021-2-41-48 [CrossRef] [Google Scholar]
  21. Babec, Е.К., Lyash, S.I., Chepurnoi, V.I., & Dobrovol’skaya, Z.S. (2012). Analysis of the State of Raise Drivings at Krivbas Mines. Metallurgical and Mining Industry, 4(4), 6–8. [Google Scholar]
  22. Shvyd’ko, P.V., Usatyj, V.V., Maslov, V.A., Usatyj, V.Yu., Furman, A.I., & Postoyalko, A.V. (2001). Experience of imported mining equipment application and explosives using in exploitating of Yuzhneu-Belozerskey iron-ore deposit. Metallurgicheskaya i Gornorudnaya Promyshlennost, (4), 67–70. [Google Scholar]
  23. Lyle, R.R. (2020). Experience with large diameter raise boring in the hard rock of the Canadian Shield. ISRM International Symposium – EUROCK 2020. [Google Scholar]
  24. Kononenko, M., Khomenko, O., Cabana, E., Mirek, A., Dyczko, A., Prostański, D., & Dychkovskyi, R. (2023). Using the methods to calculate parameters of drilling and blasting operations for emulsion explosives. Acta Montanistica Slovaca, 28(3), 655–667. https://doi.org/10.46544/ams.v28i3.10 [CrossRef] [Google Scholar]
  25. Kononenko, M., Khomenko, O., Sadovenko, I., Sobolev, V., Pazynich, Yu., & Smolinski, A. (2023). Managing the rock mass destruction under the explosion. Journal of Sustainable Mining, 22(3), 240–247. https://doi.org/10.46873/2300-3960.1391 [CrossRef] [Google Scholar]
  26. Kononenko, M., Khomenko, O., Kovalenko, I., Kosenko, A., Zagorodnii, R., & Dychkovskyi, R. (2023). Determining the performance of explosives for blasting management. Rudarsko-Geološko-Naftni Zbornik, 38(3), 19–28. https://doi.org/10.17794/rgn.2023.3.2 [CrossRef] [Google Scholar]
  27. Kononenko, M., & Khomenko, O. (2021). New theory for the rock mass destruction by blasting. Mining of Mineral Deposits, 15(2), 111–123. https://doi.org/10.33271/mining15.02.111 [CrossRef] [Google Scholar]
  28. Falshtynskyi, V., Dychkovskyi, R., Khomenko, O., & Kononenko, M. (2020). On the formation of a mine-based energy resource complex. E3S Web of Conferences, (201), 01020. https://doi.org/10.1051/e3sconf/202020101020 [CrossRef] [EDP Sciences] [Google Scholar]
  29. Lyashenko, V., Vorob’ev, A., Nebohin, V., & Vorob’ev, K. (2018). Improving the efficiency of blasting operations in mines with the help of emulsion explosives. Mining of Mineral Deposits, 12(1), 95–102. https://doi.org/10.15407/mining12.01.095 [CrossRef] [Google Scholar]
  30. Kononenko, M., Khomenko, O., Kovalenko, I., & Savchenko, M. (2021). Control of density and velocity of emulsion explosives detonation for ore breaking. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 69–75. https://doi.org/10.33271/nvngu/2021-2/069 [CrossRef] [Google Scholar]
  31. Kholodenko, T., Ustimenko, Y., Pidkamenna, L., & Pavlychenko, A. (2014). Ecological safety of emulsion explosives use at mining enterprises. Progressive Technologies of Coal, Coalbed Methane, and Ores Mining, 255–260. http://doi.org/10.1201/b17547-45 [Google Scholar]
  32. Kholodenko, T., Ustimenko, Y., Pidkamenna, L., & Pavlychenko, A. (2015). Technical, economic and environmental aspects of the use of emulsion explosives by ERA brand in underground and surface mining. New Developments in Mining Engineering 2015: Theoretical and Practical Solutions of Mineral Resources Mining, 211–219. http://doi.org/10.1201/b19901-3 [CrossRef] [Google Scholar]
  33. Khomenko, O., Kononenko, M., & Myronova, I. (2017). Ecological and technological aspects of iron-ore underground mining. Mining of Mineral Deposits, 11(2), 59–67. https://doi.org/10.15407/mining11.02.059 [CrossRef] [Google Scholar]
  34. Ratov, B.T., Fedorov, B.V., Syzdykov, A.Kh., Zakenov, S.T., & Sudakov, A.K. (2021). The main directions of modernization of rock-destroying tools for drilling solid mineral resources. 21st International Multidisciplinary Scientific GeoConference SGEM 2021. Section Exploration & Mining, 503–514. https://doi.org/10.5593/sgem2021/l.l/s03.062 [Google Scholar]
  35. Maksymovych O., Solyar T., Sudakov A., Nazar I., & Polishchuk M. (2021). Determination of stress concentration near the holes under dynamic loadings. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (3), 19–24. https://doi.org/10.33271/nvngu/2021-3/019 [CrossRef] [Google Scholar]
  36. Moldabayev, S.K., Sdvyzhkova, O.O., Babets, D.V., Kovrov, O.S., & Adil, T.K. (2021). Numerical simulation of the open pit stability based on probabilistic approach. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), 29–34. https://doi.org/10.33271/nvngu/2021-6/029 [CrossRef] [Google Scholar]
  37. Babets, D., Sdvyzhkova, O., Hapieiev, S., Shashenko, O., & Vasyl, V. (2023). Multifactorial analysis of a gateroad stability at goaf interface during longwall coal mining – A case study. Mining of Mineral Deposits, 17(2), 9–19. https://doi.org/10.33271/mining17.02.009 [CrossRef] [Google Scholar]
  38. Khomenko, O., Kononenko, M., & Lyashenko, V. (2018). Safety Improving of Mine Preparation Works at the Ore Mines. Occupational Safety in Industry, (5), 53–59. http://doi.org/10.24000/0409-2961-2018-5-53-59 [CrossRef] [Google Scholar]
  39. Kononenko, M., Khomenko, O., Savchenko, M., & Kovalenko, I. (2019). Method for calculation of drilling-and-blasting operations parameters for emulsion explosives. Mining of Mineral Deposits, 13(3), 22–30. https://doi.org/10.33271/mining13.03.022 [CrossRef] [Google Scholar]
  40. Khomenko, O., Kononenko, M., Myronova, I., & Savchenko, M. (2019). Application of the emulsion explosives in the tunnels construction. E3S Web of Conferences, (123), 01039. https://doi.org/10.1051/e3sconf/201912301039 [CrossRef] [EDP Sciences] [Google Scholar]
  41. Myronova, I. (2016). Prediction of contamination level of the atmosphere at influence zone of ironore mine. Mining of Mineral Deposits, 10(2), 64–71. https://doi.org/10.15407/mining10.02.0064 [CrossRef] [Google Scholar]
  42. Tarasyutin, V.M. (2015). Geotechnology features of high quality martite ore from deep mines of Kryvyi Rih basin. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (1), 54–60. [Google Scholar]
  43. Biletskiy, M., Ratov, B., Sudakov, A., Sudakova, D., & Borash, B. (2023). Modeling of drilling water supply wellswith airlift reverse flush agent circulation. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (1), 53–60. https://doi.org/10.33271/nvngu/2023-1/053 [CrossRef] [Google Scholar]
  44. Hapich, H., Zahrytsenko, A., Sudakov, A., Pavlychenko, A., Yurchenko, S., Sudakova, D., & Chushkina, I. (2024). Prospects of alternative water supply for the population of Ukraine during wartime and post-war reconstruction. International Journal of Environmental Studies, 81(1), 1–7. https://doi.org/10.1080/00207233.2023.2296781 [CrossRef] [Google Scholar]
  45. Rochev, V. (2018). Hydraulic borehole mining method possible application at Middle Larba alluvial gold field. E3S Web of Conferences, (56), 01025 https://doi.org/10.1051/e3sconf/20185601025 [CrossRef] [EDP Sciences] [Google Scholar]
  46. Kozhevnykov, A.O., Dreus, A.Yu., Baochang, Liu, & Sudakov, A.K. (2018). Drilling fluid circulation rate infuence on the contact temperature during borehole drilling. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 1(163), 35–43. https://doi.org/10.29202/nvngu/2018-1/14 [CrossRef] [Google Scholar]
  47. Li, W., Liu, Y., Yao, X., Chu, J., Chen, X., & Tan, Z. (2021). Study on Breakdown Pressure in Hydraulic Fracturing Process of Hard Rock Based on Numerical Simulation. Geotechnical and Geological Engineering, 39(1), 909–917. https://doi.org/10.1007/s10706-020-01531-y [CrossRef] [Google Scholar]
  48. Kopacz, M., Kulpa, J., Galica, D., Dyczko, A., & Jarosz, J. (2019). Economic valuation of coal deposits – The value of geological information in the resource recognition process. Resources Policy, (63), 101450. https://doi.org/10.1016/j.resourpol.2019.101450 [CrossRef] [Google Scholar]
  49. Yang, H., Li, G., Dong, X., Deng, T., Li, J., Qin, X., Wang, W., Zhang, Y., & Zhou, L. (2022). Application of coalbed methane hydraulic jet-increasing permeability-nitrogen injection to increase production in Shanxi mining area. Journal of Petroleum Science and Engineering, (215), 110611. https://doi.org/10.1016/j.petrol.2022.110611 [CrossRef] [Google Scholar]
  50. Cano-Salinas, L., Sourd, X., Moussaoui, K., Le Roux, S., Salem, M., Hor, A., & Zitoune, R. (2023). Effect of process parameters of Plain Water Jet on the cleaning quality, surface and material integrity of Inconel 718 milled by Abrasive Water Jet. Tribology International, (178), 108094. https://doi.org/10.1016/j.triboint.2022.108094 [CrossRef] [Google Scholar]
  51. Franco Medrano, F., Fukumoto, Y., Velte, C.M., & Hodžić, A. (2017). Mass Entrainment Rate of an Ideal Momentum Turbulent Round Jet. Journal of the Physical Society of Japan, 86(3), 034401. https://doi.org/10.7566/jpsj.86.034401 [CrossRef] [Google Scholar]
  52. Dyczko, A. (2023). Production management system in a modern coal and coke company based on the demand and quality of the exploited raw material in the aspect of building a service-oriented architecture. Journal of Sustainable Mining, 22(1), 2–19. https://doi.org/10.46873/2300-3960.1371 [CrossRef] [Google Scholar]
  53. Higuchi, K., Okazaki, J., Ito, Y., Fuji, T., & Nomura, S. (2021). Influence of Ore Assimilation and Pore Formation during Sintering on Reduction Behavior of Sintered Ores. Tetsu-to-Hagane, 107(3), 185–193. https://doi.org/10.2355/tetsutohagane.tetsu-2020-087 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.