Open Access
| Issue |
E3S Web Conf.
Volume 693, 2026
International Process Metallurgy Conference (IPMC 2025)
|
|
|---|---|---|
| Article Number | 04001 | |
| Number of page(s) | 6 | |
| Section | Physical Metallurgy and Corrosion | |
| DOI | https://doi.org/10.1051/e3sconf/202669304001 | |
| Published online | 09 February 2026 | |
- D. Sholley, Electronic Materials Science: An Introduction, Wiley, 2017. [Google Scholar]
- I. Filippou, V. Tselepi and K. Ellinas, “A Review of Microfabrication Approaches for The Development of Thin, Flattened Heat Pipes and Vapor Chambers for Passive Electronic Cooling Applications,” Micro and Nano Engineering, pp. 1–18, 2024. [Google Scholar]
- D.R. Askeland and W.J. Wright, The Science and Engineering of Materials, 7th ed., Cengage Learning, 2018. [Google Scholar]
- F. Tavakkoli, S. Ebrahimi, S. Wang and K. Vafai, “Analysis of Critical Thermal Issues in 3D Integrated Circuits,” Heat Mass Transfer, pp. 337–352, 2016. [Google Scholar]
- A. Al-Saadawi, M. El-Shenawy, A. Ashraf and A. Abdel-Aleem, “Aplication of Thin Foil Stainless Steel in Contruction,” 146, 2020. [Google Scholar]
- A. Aziz and M. Yang, “Effect of Martensitic Transformation and Grain Size on the Surface Roughening Behavior in SUS 304 and SUS 316 Thin Metal Foils,” I, pp. 167–182, 2020. [Google Scholar]
- A. Aziz, M. Yang, T. Shimizu, T. Furushima, “Effect of Martensitic Transformation and Grain Misorientation on Surface Roughening Behavior of Stainless Steel Thin Foils”, MDPI, Eng 2021, 2(3), 372–385; https://doi.org/10.3390/eng2030024 [Google Scholar]
- Sumiyanto and A. Abdunnaser, “Pengaruh Media Pendingin Terhadap Sifat Mekanik dan Struktur Mikro Plat Baja Karbon ASTM A-36,” Bina Teknika, 11, p. 155, 2017. [Google Scholar]
- A. Gupta, “Effect of Normalizing Temperature on the Microstructure and Mechanical Properties of AISI 304 Stainless Steel Thin Foil,” 2016. [Google Scholar]
- A. Hestiawan, Zuliantoni and D. Febriyanto, “Heat Treatment Effect on Mechanical Properties of JIS SCM4 Steel,” Jurnal Ilmiah Teknik Mesin: Rekayasa Mekanik, 3, no. 2, 2019. [Google Scholar]
- Y. Li, Z. Lu, T. Li, D. Li, J. Lu, P.K. Liaw and Y. Zou, “Effects of Surface Severe Plastic Deformation on the Mechanical Behavior of 304 Stainless Steel,” Journal of Materials Science, 10, 2020. [Google Scholar]
- Y. Miaoa, M.C. Rajagopalb, K. Valavalab, K. Moa, Z.-G. Meia, S. Bhattacharya, L. Jamison, S. Sinha and A.M. Yacout, “An Exploration of Measuring Lower-Length-Scale Structures in Nuclear Materials: Thermal Conductivity of U-Mo Fuel Particle,” Nuclear Materials, pp. 1–22, 2019. [Google Scholar]
- R. McGlen, R. Jachuck and S. Lin, “Integrated Thermal Management Techniques for High Power Electronic Devices,” Applied Thermal Engineering, 24, no. 8-9, pp. 1143–1156, 2004. [Google Scholar]
- A. Gupta, “Effect of Normalizing Temperature on the Microstructure and Mechanical Properties of AISI 304 Stainless Steel Thin Foil,” 2016 [Google Scholar]
- A. Aziz, M. Yang, T. Shimizu, T. Furushima “Effect of Phase Transformation on Surface Roughening Behavior in Austenitic Thin Metal Foils”, Materials Science Forum 1057, March, 2022. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.