Open Access
| Issue |
E3S Web Conf.
Volume 694, 2026
Third International Conference on Green Energy, Environmental Engineering and Sustainable Technologies 2025 (ICGEST 2025)
|
|
|---|---|---|
| Article Number | 01011 | |
| Number of page(s) | 8 | |
| Section | Application of Sustainable Technology in Construction Industry | |
| DOI | https://doi.org/10.1051/e3sconf/202669401011 | |
| Published online | 16 February 2026 | |
- H.B. Kaushik, D.C. Rai, and S.K. Jain, “Stress-Strain Characteristics of Clay Brick Masonry under Uniaxial Compression,” J. Mater. Civ. Eng., vol. 19, no. 9, pp. 728–739, 2007, doi: 10.1061/(asce)0899-1561(2007)19:9(728). [Google Scholar]
- S.R. M and D. Jegatheeswaran, “Influence of strength behavior in brick masonry prism and wallette under compression,” 2022. [Google Scholar]
- SNI 03-4166, Metode Pengujian Kuat Geser Dinding Pasangan Batu Bata Merah di Laboratorium, Badan Standarisasi Nasional. 1996. [Google Scholar]
- A. Soleymani, M.A. Najafgholipour, and A. Johari, “An experimental study on the mechanical properties of solid clay brick masonry with traditional mortars,” J. Build. Eng., vol. 58, no. July, p. 105057, 2022, doi: 10.1016/j.jobe.2022.105057. [Google Scholar]
- A. Bustos-García, E. Moreno-Fernández, R. Zavalis, and J. Valivonis, “Diagonal compression tests on masonry wallets coated with mortars reinforced with glass fibers,” Mater. Struct. Constr., vol. 52, no. 3, 2019, doi: 10.1617/s11527-019-1360-y. [Google Scholar]
- C. Briceño and P.B.L. Miguel Azenha, Graça Vasconcelos, “Influence of Conditioning of Clay Bricks Over Shear Strength of Brick Masonry,” J. Build. Eng., vol. 82, 2023, doi: https://doi.org/10.1016/j.jobe.2023.108138. [Google Scholar]
- Woo-Young Lim, “Failure mode dependent shear strength of unreinforced concrete brick masonry wall panels,” Constr. Build. Mater., vol. 414, 2024, doi: https://doi.org/10.1016/j.conbuildmat.2024.134976. [Google Scholar]
- M. Ridwan, R. Kurniawan, and Agus, “An evaluation of mechanical properties of clay brick for masonry wall in Indonesia,” MATEC Web Conf., vol. 215, 2018, doi: 10.1051/matecconf/201821501034. [Google Scholar]
- ASTM C109/109M, “Standard test method for compressive strength of hydraulic cement mortars (Using 2 - in. or cube specimens),” Annu. B. ASTM Stand. pp. 1–10, 2016. [Google Scholar]
- Badan Standarisasi Nasional, SNI 15 -3758 2004, “Pengujian Mortar.” 2004. [Google Scholar]
- K.S. Gumaste, K.S.N. Rao, B.V.V. Reddy, and K.S. Jagadish, “Strength and elasticity of brick masonry prisms and wallettes under compression,” Mater. Struct. Constr., vol. 40, no. 2, pp. 241–253, 2007, doi: 10.1617/s11527-006-9141-9. [Google Scholar]
- SNI-6882, “Spesifikasi mortar untuk pekerjaan unit pasangan, Badan Standardisasi Nasional.” 2014. [Google Scholar]
- P.E. Mezrea, M. Ispir, I.A. Balci, I.E. Bal, and A. Ilki, “Diagonal tensile tests on historical brick masonry wallets strengthened with fabric reinforced cementitious mortar,” Structures, vol. 33, pp. 935–946, 2021, doi: 10.1016/j.istruc.2021.04.076. [Google Scholar]
- S.H. Basha and H.B. Kaushik, “Evaluation of Nonlinear Material Properties of Fly Ash Brick Masonry under Compression and Shear,” J. Mater. Civ. Eng., vol. 27, no. 8, pp. 1–11, 2015, doi: 10.1061/(asce)mt.1943-5533.0001188. [Google Scholar]
- H. Hernoune, B. Benabed, R. Abousnina, and A. Alajmi, “Experimental Research and Numerical Analysis of CFRP Retrofitted Masonry Triplets under Shear Loading,” Polymers (Basel)., vol. 14, no. 18, 2022, doi: https://doi.org/10.3390/polym14183707. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.