Open Access
Issue
E3S Web Conf.
Volume 694, 2026
Third International Conference on Green Energy, Environmental Engineering and Sustainable Technologies 2025 (ICGEST 2025)
Article Number 01012
Number of page(s) 10
Section Application of Sustainable Technology in Construction Industry
DOI https://doi.org/10.1051/e3sconf/202669401012
Published online 16 February 2026
  1. Ogunmakinde, O.E., Egbelakin, T., Sher, W.: Contributions of the Circular Economy to the UN Sustainable Development Goals Through Sustainable Construction. Resources Conservation and Recycling. 178, 106023 (2022). https://doi.org/10.1016/j.resconrec.2021.106023 [Google Scholar]
  2. Zhang, Z., Lei, Y.D., Liew, J.Y.R., Liu, M., Wong, G.H.Y., Du, H.: Embodied Carbon Saving Potential of Using Recycled Materials as Cement Substitute in Singapore’s Buildings. NPJ Mater. Sustain. 2, (2024). https://doi.org/10.1038/s44296-024-00032-w [Google Scholar]
  3. Machaka, M., Khatib, J., Baydoun, S., Elkordi, A., Assaad, J.J.: The Effect of Adding Phragmites Australis Fibers on the Properties of Concrete. Buildings. 12, 278 (2022). https://doi.org/10.3390/buildings12030278 [Google Scholar]
  4. Eid, N.A.M., Zaid, W., Günal, A.Y.: Strengthening Concrete Characteristics Through Fiber Additives: A Comprehensive Review. International Journal of Innovative Research in Engineering & Management. 11, 49–59 (2024). https://doi.org/10.55524/ijirem.2024.11.3.8 [Google Scholar]
  5. Tampi, R., Don Kabo: Tensile Strength Characteristics of Concrete Blocks Using Abaca Fiber. FJSR. 3, 19–28 (2024). https://doi.org/10.55927/fjsr.v3i1.7567 [Google Scholar]
  6. Shah, I., Li, J., Yang, S., Zhang, Y., Anwar, A.: Experimental Investigation on the Mechanical Properties of Natural Fiber Reinforced Concrete. Journal of Renewable Materials. 10, 1307–1320 (2022). https://doi.org/10.32604/jrm.2022.017513 [Google Scholar]
  7. Indrawati, S., Yuwana, L., Zainuri, M.: Abaca Fiber as a Potential Reinforcer for Acoustic Absorption Material at Middle-High Frequencies. J. Renew. Mater. 12, 909–921 (2024). https://doi.org/10.32604/jrm.2024.048452 [Google Scholar]
  8. Anthony, R., Awasthi, S.Y., Singh, P., Prasath Kumar, V.R.: An Experimental and Characteristic Study of Abaca Fiber Concrete. In: Prabhu, S., Cheralathan, M., Datta, S., Nanda Kumar, P., and Mohammed, Iqbal U. (eds.) IOP Conf. Ser. Mater. Sci. Eng. IOP Publishing Ltd (2020) [Google Scholar]
  9. ASTM C39: Test Method for Compressive Strength of Cylindrical Concrete Specimens, http://www.astm.org/cgi-bin/resolver.cgi?C39C39M-23, (2023) [Google Scholar]
  10. Cai, Z., Wang, H.: Influence of NaCl Freeze-Thaw Cycles on the Mechanical Strength of Reactive Powder Concrete With the Assembly Unit of Sulphoaluminate Cement and Ordinary Portland Cement. Coatings. 11, 1238 (2021). https://doi.org/10.3390/coatings11101238 [Google Scholar]
  11. Katman, H.Y., Khai, W.J., Bheel, N., Kırgız, M.S., Kumar, A., Benjeddou, O.: Fabrication and Characterization of Cement-Based Hybrid Concrete Containing Coir Fiber for Advancing Concrete Construction. Buildings. 12, 1450 (2022). https://doi.org/10.3390/buildings12091450 [Google Scholar]
  12. Khan, R.I., Haque, M.I., Tahsin, A., Ashraf, W.: Multiscale performance and environmental impact assessment of slag and Portland blended cement for optimum carbonation curing. CEMENT. 14, 100088 (2023). https://doi.org/10.1016/j.cement.2023.100088 [Google Scholar]
  13. Manniello, C., Cillis, G., Statuto, D., Pasquale, A.D., Picuno, P.: Experimental Analysis on Concrete Blocks Reinforced With ≪em>Arundo Donax</Em> Fibers. Journal of Agricultural Engineering. (2021). https://doi.org/10.4081/jae.2021.1288 [Google Scholar]
  14. Karem, N.A.M., Awad, H.K.: Basalt Fiber Implication on Fresh and Mechanical Properties of Self-Compacting Concrete. Engineering Technology & Applied Science Research. 15, 24637–24643 (2025). https://doi.org/10.48084/etasr.11411 [Google Scholar]
  15. Ali, M.A.A., Kadhim, M.J., Nasser, I.F.: Some Properties of Cement Mortar Incorporating Micro and Nano-Metakaolin Materials. Materials Science Forum. 1021, 231–240 (2021). https://doi.org/10.4028/www.scientific.net/msf.1021.231 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.