Open Access
| Issue |
E3S Web Conf.
Volume 706, 2026
3rd International Conference on Environment, Green Technology, and Digital Society (INTERCONNECTS 2025)
|
|
|---|---|---|
| Article Number | 02007 | |
| Number of page(s) | 7 | |
| Section | Engineering and Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202670602007 | |
| Published online | 21 April 2026 | |
- Mundiri. (2008). Logika. Jakarta: RajaGrafindo Persada. [Google Scholar]
- Chen, B., Roy, K., Uzzaman, A., Raftery, G., & Lim, J. B. P. (2020). Axial strength of back-to-back cold-formed steel channels with edge-stiffened holes, un-stiffened holes and plain webs. Journal of Constructional Steel Research, 174. https://doi.org/10.1016/j.jcsr.2020.106313 [Google Scholar]
- Chen, M. T., & Young, B. (2019). Material properties and structural behavior of cold-formed steel elliptical hollow section stub columns. Thin-Walled Structures, 134, 111–126. https://doi.org/10.1016/j.tws.2018.07.055 [Google Scholar]
- Lokhande, P. R., & Jawalkar, G. C. (2018). IJSRSET184928 | Comparative Study and Analysis of Cold Formed Steel Columns Subjected to Axial Loading. www.ijsrset.com [Google Scholar]
- Sandjaya, A., & Suryoatmono, B. (2018). Studi Eksperimental Batang Tekan Baja Canai Dingin Diperkaku Sebagian. Jurnal Teknik Sipil, 25(1), 19. https://doi.org/10.5614/jts.2018.25.1.3. [Google Scholar]
- Roy, K., Lau, H. H., Ting, T. C. H., Chen, B., & Lim, J. B. P. (2020). Flexural capacity of gapped built-up cold-formed steel channel sections including web stiffeners. Journal of Constructional Steel Research, 172. https://doi.org/10.1016/j.jcsr.2020.106154 [Google Scholar]
- Ruus Banu, K., Handono, D., & Pandaleke, R. (2017). Pengaruh Bentuk Badan Profil Baja Ringan Terhadap Kuat Tekan. Jurnal Sipil Statik, 5(5), 249–262. [Google Scholar]
- Sari, A. P., Rahamadi, A. P., & Kristiawan, S. A. (2019). Studi Eksperimental Tekuk Lokal Batang Baja Ringan Canai Dingin. In Jurnal Riset Rekayasa Sipil Universitas Sebelas Maret (Vol. 3, Issue 1). [Google Scholar]
- Selvaraj, S., & Madhavan, M. (2018). Geometric Imperfection Measurements and Validations on Cold-Formed Steel Channels Using 3D Noncontact Laser Scanner. Journal of Structural Engineering, 144(3). https://doi.org/10.1061/(asce)st.1943-541x.0001993 [Google Scholar]
- Pariatmono, Geometric Imperfection Measurement Technique in Structural Members. 1994. [Google Scholar]
- Sukhvarsh Jerath. (2021). Structural Stability Theory and Practice. John Wiley & Sons, Inc. [Google Scholar]
- Ungureanu, V., Kotełko, M., Borkowski, Ł., & Grudziecki, J. (2018). Behaviour of thin-walled cold-formed steel members in eccentric compression. AIP Conference Proceedings, 1922. https://doi.org/10.1063/1.5019077 [Google Scholar]
- Vigneshkannan, S., & Bari, J. A. (n.d.). Numerical Investigation on behavior of cold formed builtup steel columns. http://ijire.org/ [Google Scholar]
- Wiguna, B., Sofyan Arief, D., Badri, M., Mesin, J. T., Riau, U., Bina, K., & Panam, W. (2017). Forming Process Product Trunk Profile C + / Channel Plus On Cold Form Steel Machine. In Oktober (Vol. 4, Issue 2). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.