Open Access
Issue
E3S Web Conf.
Volume 730, 2026
International Conference on Advances and Innovations in Soft Soil Engineering (Soft Soils 2026)
Article Number 04002
Number of page(s) 6
Section Ground Improvement and Low-Carbon Solutions
DOI https://doi.org/10.1051/e3sconf/202673004002
Published online 03 August 2026
  1. G. Liu, H. Li, J. Zhang, X. Wang, Comparison of nanomaterials with other unconventional materials used as additives for soil improvement in the context of sustainable development: a review. Nanomaterials 11, 15 (2020) [CrossRef] [PubMed] [Google Scholar]
  2. M.E. Seif, A. Ghorbani, A. Eslami, M. Karimi, Investigating the impact of nano-colloidal silica on sandy clay strength: Experimental results and stress-strain modeling insights. Constr. Build. Mater. 438, 137105 (2024) [Google Scholar]
  3. P.M. Gallagher, A. Pamuk, T. Abdoun, Stabilization of liquefiable soils using colloidal silica grout. J. Mater. Civ. Eng. 19, 33 (2007) [Google Scholar]
  4. G. Ciardi, G. Vannucchi, C. Madiai, Effects of colloidal silica grouting on geotechnical properties of liquefiable soils: A review. Geotechnics 1, 460 (2021) [Google Scholar]
  5. C. Wong, A. Pedrotti, A. El Mountassir, R.J. Lunn, A study on the mechanical interaction between soil and colloidal silica gel for ground improvement. Eng. Geol. 243, 84 (2018) [Google Scholar]
  6. R.K. Iler, The Colloid Chemistry of Silica and Silicates (Cornell University Press, Ithaca, NY, 1955) [Google Scholar]
  7. R.K. Iler, Coagulation of colloidal silica by calcium ions, mechanism, and effect of particle size. J. Colloid Interface Sci. 53, 476 (1975) [Google Scholar]
  8. G. Liu, J. Zhang, H. Li, X. Wang, Permeation grouting of low-permeability silty sands with colloidal silica. Case Stud. Constr. Mater. 19, e02327 (2023) [Google Scholar]
  9. C. Wong, Colloidal Silica Grout for the Formation of Hydraulic Barriers: An investigation of the Hydro-Mechanical and Gelling Behavior, Ph.D. thesis, University of Strathclyde, Glasgow, UK (2021) [Google Scholar]
  10. G. Ciardi, G. Vannucchi, C. Madiai, A. Fioravante, Effects of high-diluted colloidal silica grouting on the behaviour of a liquefiable sand. Geotech. Res. 7, 193 (2020) [Google Scholar]
  11. A. Vranna, T. Tika, The mechanical response of a silty sand stabilized with colloidal silica. Geotechnics 1, 243 (2021) [Google Scholar]
  12. G. Kannan, E.R. Sujatha, A review on the Choice of Nano-Silica as Soil Stabilizer. Silicon 14, 6477 (2022) [Google Scholar]
  13. S.M. Haeri, A. Hamidi, S.M. Hosseini, Evaluation and comparison of strength characteristics of Gorgan Loessial soil improved with Nano-Silica, Lime and Portland Cement (2015) [Google Scholar]
  14. R. Kong, X. Zhang, G. Wang, Stabilization of Loess Using Nano-SiO2. Materials 11, 1014 (2018) [CrossRef] [PubMed] [Google Scholar]
  15. F. Changizi, A. Haddad, Improving the geotechnical properties of soft clay with nano-silica particles. Proc. Inst. Civ. Eng. Ground Improv. 170, 62 (2017) [Google Scholar]
  16. J.K. Mitchell, K. Soga, Fundamentals of Soil Behavior, 3rd ed. (John Wiley & Sons, Hoboken, NJ, 2005) [Google Scholar]
  17. S. Puvvadi, A. Sridharan, S. Vk, Swelling behaviour of soil-bentonite mixtures. Can. Geotech. J. 33, 808 (1996) [Google Scholar]
  18. D. Stewart, P. Studds, T.W. Cousens, The factors controlling the engineering properties of bentonite-enhanced sand. Appl. Clay Sci. 23, 97 (2003) [Google Scholar]
  19. M. Abbasi, A. Ghorbani, A. Eslami, A comparative study on stabilization efficiency of kaolinite and montmorillonite clays with fly ash (FA) and rice husk ash (RHA)-based geopolymers. J. Mater. Res. Technol. 36, 2332 (2025) [Google Scholar]
  20. A.A. Firoozi, A.A. Firoozi, M.S. Baghini, A review of clayey soils. Asian J. Appl. Sci. 4 (2016) [Google Scholar]
  21. S.-S. Park, Z. Nong, Effect of Sand Contents on Plastic and Liquid Limits and Shear Strength of Clays. J. Korean Geotech. Soc. 30 (2014) [Google Scholar]
  22. W. Oh, S. Vanapalli, Undrained Shear Strength of Unsaturated Soils under Zero or Low Confining Pressures in the Vadose Zone. Vadose Zone J. 17 (2018) [Google Scholar]
  23. P. Persoff, K. Pruess, L. Benson, P.A. Witherspoon, Effect of dilution and contaminants on sand grouted with colloidal silica. J. Geotech. Geoenviron. Eng. 125, 461 (1999) [Google Scholar]
  24. N. Ghasabkolaei, A.H. Choobbasti, N. Roshan, S.E. Ghasemi, Physical and geotechnical properties of cement-treated clayey soil using silica nanoparticles: An experimental study. Eur. Phys. J. Plus 131, 134 (2016) [Google Scholar]
  25. A. Ghorbani, H. Hasanzadehshooiili, E. Ghamari, J. Medzvieckas, Effect of Selected Nanospheres on the Mechanical Strength of Lime-Stabilized High-Plasticity Clay Soils. Adv. Civ. Eng. 2019, 4257530 (2019) [Google Scholar]
  26. Sigma-Aldrich, Safety Data Sheet - LUDOX HS-30 Colloidal Silica, Product Number 420824 (2024) [Google Scholar]
  27. Australian Standard AS 5101.4-2008, Methods for preparation and testing of stabilized materials - Method 4: Unconfined compressive strength of compacted materials (2008) [Google Scholar]
  28. R.J. Hunter, Foundations of Colloid Science, Vol. 1 (Oxford University Press, Oxford, UK, 1986) [Google Scholar]
  29. J. Zhang, Y. Li, X. Wang, H. Chen, Effects of metal ions with different valences on colloidal aggregation in low-concentration silica colloidal systems characterized by continuous online zeta potential analysis. Colloids Surf. A Physicochem. Eng. Asp. 481, 1 (2015) [Google Scholar]
  30. A. Kumar, P. Lingfa, Sodium bentonite and kaolin clays: Comparative study on their FT-IR, XRF, and XRD. Mater. Today: Proc. 22, 737 (2020) [Google Scholar]
  31. W. Wang, Y. Zhang, Z. Li, X. Liu, Mechanical and micro-structure characteristics of cement-treated expansive soil admixed with nano-MgO. Bull. Eng. Geol. Environ. 82 (2023) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.