E3S Web Conf.
Volume 91, 2019Topical Problems of Architecture, Civil Engineering and Environmental Economics (TPACEE 2018)
|Number of page(s)||6|
|Published online||02 April 2019|
Optimization of plastic foam composition for insulation systems
1 Moscow State University of Civil Engineering, 129337, Yaroslavskoe shosse, 26, Moscow, Russia
2 NRU High School of Economics, 101000, Myasnitskaya st., 20, Moscow, Russia
* Corresponding author: firstname.lastname@example.org
Construction insulation systems should provide solutions to the problems of creation of suitable conditions of load-bearing construction elements and whole construction, reduction of heat loss through thermal insulation layer, and creation of living comfort in buildings. The article presents the results of experimental studies, the purpose of which is to optimize the composition of extruded polystyrene foam, the formation of methods for selecting its composition and the development of systems for the use of products based on extruded polystyrene foam. Main provisions of the method of analytical optimization, which allows significantly reducing the material and time costs for processing the experimental results, are also provided. Aspects of the implementation of building systems using extruded polystyrene foam both from the point of view of minimizing heat loss through contact areas and the degree of influence of vapor permeability of building structures on the temperature and humidity conditions of premises are studied. Mandatory criteria for construction with the use of building systems are safety conditions, including both structural safety (including maintenance-free cycle) and fire safety.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.