Issue |
E3S Web Conf.
Volume 164, 2020
Topical Problems of Green Architecture, Civil and Environmental Engineering 2019 (TPACEE 2019)
|
|
---|---|---|
Article Number | 14021 | |
Number of page(s) | 8 | |
Section | Materials for Energy and Environment | |
DOI | https://doi.org/10.1051/e3sconf/202016414021 | |
Published online | 05 May 2020 |
Modeling and thermal calculation of a pipeline insulation system
Moscow State University of Civil Engineering (National Research University), Moscow, Russia
* Corresponding author: Vladisimos@mail.ru
Energy efficiency of heating networks depends on the costs of the manufacture of insulation materials and components, its installation and exploitation of insulating jacket. As insulation materials for insulation of heating networks, products based on rock wool, polyurethane foam extruded polystyrene foam, foam rubber and polyethylene foam. In this contribution introduced basic principles of calculating the thickness of the thermal insulation of a pipeline by the value of the standard density of the heat flow are given using an example of the use of products based on polyethylene foam. Calculation of the heat flux from the surface of the heat-insulating structure is carried out at a given thickness of the heat-insulating layer if there is a need to determine heat loss (or cold loss). The basis for the calculation is a mathematical model of heat transfer, a developed calculation algorithm and a computer program. The method of installation of thermal insulation depends on the diameter of the pipeline and the selected type of product. Insulating cylinders or cylinders in combination with heat-insulating mats are used for pipelines of small diameters. Roll materials are used to isolate large diameters. Products are fixed on pipelines using mechanical fasteners.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.