E3S Web Conf.
Volume 104, 2019International Conference “Energy Efficiency and Energy Saving in Technical Systems” (EEESTS-2019)
|Number of page(s)||8|
|Section||Modern Energy Efficient Automation Technology|
|Published online||21 June 2019|
Design and development of installation of the electromechanical transformer from a discrete secondary part for cellulose grind process
Don State Technical University, Department of automation of production processes, 344000 Rostov-on-Don, Russia
* Corresponding author: firstname.lastname@example.org
In the present publication, problems of design of the electromechanical transformer with a discrete secondary part are considered. Design process is analysed, the key geometrical parameters of a tooth zone of the inductor are calculated. Process of an optimization of the inductor is carried out.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.