| Issue |
E3S Web Conf.
Volume 110, 2019
International Science Conference SPbWOSCE-2018 “Business Technologies for Sustainable Urban Development”
|
|
|---|---|---|
| Article Number | 01057 | |
| Number of page(s) | 13 | |
| Section | Energy Efficiency in the Construction | |
| DOI | https://doi.org/10.1051/e3sconf/201911001057 | |
| Published online | 09 August 2019 | |
Geometric modeling of surfaces dependent cross sections in the tasks of spinning and laying
1 Moscow Aviation Institute, Volokolamskoe highway, 4, Moscow, 125993, Russia
2 Voronezh State Technical University, Moscow Avenue, 14, Voronezh, 394026, Russia
* Corresponding author: belyaeva-sv@mail.ru
The article is devoted to the development of a geometric model of surfaces of dependent sections to solve the problems of winding by continuous fibers in the direction of the force and its related process of automated winding of composite materials. A uniform method for specifying the surfaces of dependent sections with a curvilinear generator and a method for solid modeling of the shell obtained by winding or calculation methods are described.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.