E3S Web Conf.
Volume 178, 2020High Speed Turbomachines and Electrical Drives Conference 2020 (HSTED-2020)
|Number of page(s)||4|
|Published online||09 July 2020|
Computational experiment on determination of load on the rollers of continuous casting machine
Vologda State University, Institute of civil engineering, 160000 Vologda Lenina st. 15, Russia
2 Kazan State Power Engineering University, Kazan, Russia
The article is devoted to calculations of load on rollers of a curvilinear continuous casting machine during bending of the ingot in the levelling section. The calculation takes into account the elastic and plastic characteristics of metal and the flexibility of the roller apparatus. Determination of load on rollers together with meeting other requirements such as reducing the cooling water consumption, minimizing the energy consumption enables optimizing the technology of slab cooling in the secondary cooling zone (SCZ) and obtaining metal of the required quality.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.